[PATCH v3 2/4] mmc: xenon: add AP807 compatible string

[kostap at marvell.com]

From: Marcin Wojtas <mw at semihalf.com>

This patch adds new compatible string to differentiate
between the controllers versions included in the AP807
north bridge. Thanks to this change, the SoCs which use
AP807 will not run unintentionally in the 'slow mode'
with disabled UHS modes.

Signed-off-by: Marcin Wojtas <mw at semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
---
 drivers/mmc/host/sdhci-xenon.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index d19eef5f725f..666cee4c7f7c 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -689,6 +689,7 @@ static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = {
 
 static const struct of_device_id sdhci_xenon_dt_ids[] = {
 	{ .compatible = "marvell,armada-ap806-sdhci", .data = (void *)XENON_AP806},
+	{ .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
 	{ .compatible = "marvell,armada-cp110-sdhci", .data =  (void *)XENON_CP110},
 	{ .compatible = "marvell,armada-3700-sdhci", .data =  (void *)XENON_A3700},
 	{}
-- 
2.17.1