[PATCH] mmc: sdhci-iproc: Add ACPI bindings for the rpi4

[Stefan Wahren]

Hi,

Am 11.01.21 um 04:39 schrieb Jeremy Linton:
> Hi,
>
> On 1/9/21 5:07 AM, Stefan Wahren wrote:
>> Hi Jeremy,
>>
>> +add Nicolas
>>
>> Am 08.01.21 um 22:13 schrieb Jeremy Linton:
>>> The rpi4 has a Arasan controller it carries over
>>> from the rpi3, and a newer eMMC2 controller.
>>> Because of a couple "quirks" it seems wiser to bind
>>> these controllers to the same driver that DT is using
>>> on this platform rather than the generic sdhci_acpi
>>> driver with PNP0D40.
>>>
>>> So, we use BCM2847 for the older Arasan and BRCME88C
>>> for the newer eMMC2.
>>>
>>> With this change linux is capable of utilizing the
>>> SD card slot, and the wifi on this platform
>>> with linux.
>>>
>>> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
>>> ---
>>>   drivers/mmc/host/sdhci-iproc.c | 14 ++++++++++++++
>>>   1 file changed, 14 insertions(+)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-iproc.c
>>> b/drivers/mmc/host/sdhci-iproc.c
>>> index c9434b461aab..f79d97b41805 100644
>>> --- a/drivers/mmc/host/sdhci-iproc.c
>>> +++ b/drivers/mmc/host/sdhci-iproc.c
>>> @@ -250,6 +250,14 @@ static const struct sdhci_pltfm_data
>>> sdhci_bcm2835_pltfm_data = {
>>>       .ops = &sdhci_iproc_32only_ops,
>>>   };
>>>   +static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = {
>>> +    .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
>>> +          SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
>>> +          SDHCI_QUIRK_NO_HISPD_BIT,
>>> +    .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
>>> +    .ops = &sdhci_iproc_32only_ops,
>>> +};
>
> First, thanks for taking a look at this!
>
>
>> Why do we need an almost exact copy of bcm2835_data which works fine for
>> all Raspberry Pi boards?
>
> The short answer to the remainder of this email is that i'm trying to
> continue supporting existing OSs (windows) using the ACPI tables on
> the rpi3/rpi4 while adding rpi4+Linux support.
>
> An even shorter answer is they don't work because ACPI doesn't provide
> the same clock/attributes/etc controls that exist with DT.
>
> So, what happened here is that I got this controller "working" with
> the generic PNP0D40 sdhci_acpi driver. I managed this only by
> controlling the sdhci_caps/masks in the firmware. In theory this
> minimizes the amount of work needed on the other OS which are booting
> on the same ACPI tables (*bsds). They should only need to quirk the
> bcm/arasan specific functionality, rather than some of the quirking
> which change the caps behavior. But because we don't know which if any
> of the older rpi/arasan quirks are still needed the safest solution is
> to use the _iproc driver and just drop the quirk flags known to be
> worked around by the firmware caps override.

okay, thanks for the explanation. I was also confused by bcm_arasan,
because there is already an Arasan specific sdhci driver. But now it's
clear to me.

Could you please add a short comment (above sdhci_bcm_arasan_data) why
we cannot use bcm2835_data?

Btw the subject isn't complete. The patch is also related to the rpi3.

Best regards
Stefan