[PATCH] arm64: dts: rockchip: rename pinctrl nodename to gmac2io for nanopi-r2s board

[Johan Jonker]

A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dt.yaml:
ethernet-phy: 'reg' is a required property

The pinctrl nodename "ethernet-phy" conflicts with the rules
in the "ethernet-phy.yaml" document, so rename it to "gmac2io".

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/ethernet-phy.yaml

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 2ee07d15a..86732b45d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -280,7 +280,7 @@
 		};
 	};
 
-	ethernet-phy {
+	gmac2io {
 		eth_phy_reset_pin: eth-phy-reset-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
-- 
2.11.0