[PATCH] power: supply: z2_battery: Convert to GPIO descriptors

[Linus Walleij]

This converts the Palm Z2 battery driver to use GPIO descriptors.

Cc: Daniel Mack <daniel at zonque.org>
Cc: Haojian Zhuang <haojian.zhuang at gmail.com>
Cc: Robert Jarzmik <robert.jarzmik at free.fr>
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/mach-pxa/z2.c            | 12 +++++++-
 drivers/power/supply/z2_battery.c | 46 ++++++++++++++-----------------
 include/linux/z2_battery.h        |  1 -
 3 files changed, 32 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 21fd76bb09cd..a5dad8d08cac 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -488,7 +488,6 @@ static struct z2_battery_info batt_chip_info = {
 	.batt_I2C_bus	= 0,
 	.batt_I2C_addr	= 0x55,
 	.batt_I2C_reg	= 2,
-	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
 	.min_voltage	= 3475000,
 	.max_voltage	= 4190000,
 	.batt_div	= 59,
@@ -497,9 +496,19 @@ static struct z2_battery_info batt_chip_info = {
 	.batt_name	= "Z2",
 };
 
+static struct gpiod_lookup_table z2_battery_gpio_table = {
+	.dev_id = "aer915",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO0_ZIPITZ2_AC_DETECT,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct i2c_board_info __initdata z2_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("aer915", 0x55),
+		.dev_name = "aer915",
 		.platform_data	= &batt_chip_info,
 	}, {
 		I2C_BOARD_INFO("wm8750", 0x1b),
@@ -510,6 +519,7 @@ static struct i2c_board_info __initdata z2_i2c_board_info[] = {
 static void __init z2_i2c_init(void)
 {
 	pxa_set_i2c_info(NULL);
+	gpiod_add_lookup_table(&z2_battery_gpio_table);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
 }
 #else
diff --git a/drivers/power/supply/z2_battery.c b/drivers/power/supply/z2_battery.c
index ebd2e42a4457..b1508fe70e5e 100644
--- a/drivers/power/supply/z2_battery.c
+++ b/drivers/power/supply/z2_battery.c
@@ -6,7 +6,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -18,6 +18,7 @@
 
 struct z2_charger {
 	struct z2_battery_info		*info;
+	struct gpio_desc		*charge_gpiod;
 	int				bat_status;
 	struct i2c_client		*client;
 	struct power_supply		*batt_ps;
@@ -95,8 +96,8 @@ static void z2_batt_update(struct z2_charger *charger)
 
 	mutex_lock(&charger->work_lock);
 
-	charger->bat_status = (info->charge_gpio >= 0) ?
-		(gpio_get_value(info->charge_gpio) ?
+	charger->bat_status = charger->charge_gpiod ?
+		(gpiod_get_value(charger->charge_gpiod) ?
 		POWER_SUPPLY_STATUS_CHARGING :
 		POWER_SUPPLY_STATUS_DISCHARGING) :
 		POWER_SUPPLY_STATUS_UNKNOWN;
@@ -131,7 +132,7 @@ static int z2_batt_ps_init(struct z2_charger *charger, int props)
 	enum power_supply_property *prop;
 	struct z2_battery_info *info = charger->info;
 
-	if (info->charge_gpio >= 0)
+	if (charger->charge_gpiod)
 		props++;	/* POWER_SUPPLY_PROP_STATUS */
 	if (info->batt_tech >= 0)
 		props++;	/* POWER_SUPPLY_PROP_TECHNOLOGY */
@@ -147,7 +148,7 @@ static int z2_batt_ps_init(struct z2_charger *charger, int props)
 		return -ENOMEM;
 
 	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
-	if (info->charge_gpio >= 0)
+	if (charger->charge_gpiod)
 		prop[i++] = POWER_SUPPLY_PROP_STATUS;
 	if (info->batt_tech >= 0)
 		prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
@@ -206,22 +207,23 @@ static int z2_batt_probe(struct i2c_client *client,
 
 	mutex_init(&charger->work_lock);
 
-	if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio)) {
-		ret = gpio_request(info->charge_gpio, "BATT CHRG");
-		if (ret)
-			goto err;
+	charger->charge_gpiod = devm_gpiod_get_optional(&client->dev,
+							NULL, GPIOD_IN);
+	if (IS_ERR(charger->charge_gpiod))
+		return dev_err_probe(&client->dev,
+				     PTR_ERR(charger->charge_gpiod),
+				     "failed to get charge GPIO\n");
 
-		ret = gpio_direction_input(info->charge_gpio);
-		if (ret)
-			goto err2;
+	if (charger->charge_gpiod) {
+		gpiod_set_consumer_name(charger->charge_gpiod, "BATT CHRG");
 
-		irq_set_irq_type(gpio_to_irq(info->charge_gpio),
+		irq_set_irq_type(gpiod_to_irq(charger->charge_gpiod),
 				 IRQ_TYPE_EDGE_BOTH);
-		ret = request_irq(gpio_to_irq(info->charge_gpio),
+		ret = request_irq(gpiod_to_irq(charger->charge_gpiod),
 				z2_charge_switch_irq, 0,
 				"AC Detect", charger);
 		if (ret)
-			goto err3;
+			goto err;
 	}
 
 	ret = z2_batt_ps_init(charger, props);
@@ -245,11 +247,8 @@ static int z2_batt_probe(struct i2c_client *client,
 err4:
 	kfree(charger->batt_ps_desc.properties);
 err3:
-	if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio))
-		free_irq(gpio_to_irq(info->charge_gpio), charger);
-err2:
-	if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio))
-		gpio_free(info->charge_gpio);
+	if (charger->charge_gpiod)
+		free_irq(gpiod_to_irq(charger->charge_gpiod), charger);
 err:
 	kfree(charger);
 	return ret;
@@ -258,16 +257,13 @@ static int z2_batt_probe(struct i2c_client *client,
 static int z2_batt_remove(struct i2c_client *client)
 {
 	struct z2_charger *charger = i2c_get_clientdata(client);
-	struct z2_battery_info *info = charger->info;
 
 	cancel_work_sync(&charger->bat_work);
 	power_supply_unregister(charger->batt_ps);
 
 	kfree(charger->batt_ps_desc.properties);
-	if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio)) {
-		free_irq(gpio_to_irq(info->charge_gpio), charger);
-		gpio_free(info->charge_gpio);
-	}
+	if (charger->charge_gpiod)
+		free_irq(gpiod_to_irq(charger->charge_gpiod), charger);
 
 	kfree(charger);
 
diff --git a/include/linux/z2_battery.h b/include/linux/z2_battery.h
index eaba53ff387c..9e8be7a7cd25 100644
--- a/include/linux/z2_battery.h
+++ b/include/linux/z2_battery.h
@@ -6,7 +6,6 @@ struct z2_battery_info {
 	int	 batt_I2C_bus;
 	int	 batt_I2C_addr;
 	int	 batt_I2C_reg;
-	int	 charge_gpio;
 	int	 min_voltage;
 	int	 max_voltage;
 	int	 batt_div;
-- 
2.29.2