[PATCH] arm64: dts: imx8mn-beacon-som: Configure RTC aliases

Adam Ford aford173 at gmail.com
Sun Jan 10 06:53:53 EST 2021


On the i.MX8MN Beacon SOM, there is an RTC chip which is fed power
from the baseboard during power off.  The SNVS RTC integrated into
the SoC is not fed power.  Depending on the order the modules are
loaded, this can be a problem if the external RTC isn't rtc0.

Make the alias for rtc0 point to the external RTC all the time and
rtc1 point to the SVNS in order to correctly hold date/time over
a power-cycle.

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 67e5e5b9ddea..2120e6485393 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -4,6 +4,11 @@
  */
 
 / {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	usdhc1_pwrseq: usdhc1_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -212,7 +217,7 @@ eeprom at 50 {
 		reg = <0x50>;
 	};
 
-	rtc at 51 {
+	rtc: rtc at 51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
 	};
-- 
2.25.1




More information about the linux-arm-kernel mailing list