[PATCH 01/10] soc: fujitsu: hwb: Add hardware barrier driver init/exit code
Misono Tomohiro
misono.tomohiro at jp.fujitsu.com
Fri Jan 8 05:52:32 EST 2021
This adds hardware barrier driver's struct definitions and
module init/exit code. We use miscdeice for barrier driver ioctl
and /dev/fujitsu_hwb will be created upon module load.
Following commits will add each ioctl definition.
Signed-off-by: Misono Tomohiro <misono.tomohiro at jp.fujitsu.com>
---
drivers/soc/fujitsu/fujitsu_hwb.c | 313 ++++++++++++++++++++++++++++++
1 file changed, 313 insertions(+)
create mode 100644 drivers/soc/fujitsu/fujitsu_hwb.c
diff --git a/drivers/soc/fujitsu/fujitsu_hwb.c b/drivers/soc/fujitsu/fujitsu_hwb.c
new file mode 100644
index 000000000000..44c32c1683df
--- /dev/null
+++ b/drivers/soc/fujitsu/fujitsu_hwb.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 FUJITSU LIMITED
+ *
+ * This hardware barrier (HWB) driver provides a set of ioctls to realize synchronization
+ * by PEs in the same Come Memory Group (CMG) by using implementation defined registers.
+ * On A64FX, CMG is the same as L3 cache domain.
+ *
+ * The main purpose of the driver is setting up registers which cannot be accessed
+ * from EL0. However, after initialization, BST_SYNC/LBSY_SYNC registers which is used
+ * in synchronization main logic can be accessed from EL0 (therefore it is fast).
+ *
+ * Simplified barrier operation flow of user application is as follows:
+ * (one PE)
+ * 1. Call IOC_BB_ALLOC to setup INIT_SYNC register which is shared in a CMG.
+ * This specifies which PEs join synchronization
+ * (on each PE joining synchronization)
+ * 2. Call IOC_BW_ASSIGN to setup ASSIGN_SYNC register per PE
+ * 3. Barrier main logic (all logic runs in EL0)
+ * a) Write 1 to BST_SYNC register
+ * b) Read LBSY_SYNC register
+ * c) If LBSY_SYNC value is 1, sync is finished, otherwise go back to b
+ * (If all PEs joining synchronization write 1 to BST_SYNC, LBSY_SYNC becomes 1)
+ * 4. Call IOC_BW_UNASSIGN to reset ASSIGN_SYNC register
+ * (one PE)
+ * 5. Call IOC_BB_FREE to reset INIT_SYNC register
+ */
+
+#include <asm/cputype.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+#define pr_fmt(fmt) "[%s:%s:%d] " fmt, KBUILD_MODNAME, __func__, __LINE__
+
+/* Since miscdevice is used, /dev/fujitsu_hwb will be created when module is loaded */
+#define FHWB_DEV_NAME "fujitsu_hwb"
+
+/* Implementation defined registers for barrier shared in CMG */
+#define FHWB_INIT_SYNC_BB0_EL1 sys_reg(3, 0, 15, 13, 0)
+#define FHWB_INIT_SYNC_BB1_EL1 sys_reg(3, 0, 15, 13, 1)
+#define FHWB_INIT_SYNC_BB2_EL1 sys_reg(3, 0, 15, 13, 2)
+#define FHWB_INIT_SYNC_BB3_EL1 sys_reg(3, 0, 15, 13, 3)
+#define FHWB_INIT_SYNC_BB4_EL1 sys_reg(3, 0, 15, 13, 4)
+#define FHWB_INIT_SYNC_BB5_EL1 sys_reg(3, 0, 15, 13, 5)
+
+/* Implementation defined registers for barrier per PE */
+#define FHWB_CTRL_EL1 sys_reg(3, 0, 11, 12, 0)
+#define FHWB_BST_BIT_EL1 sys_reg(3, 0, 11, 12, 4)
+#define FHWB_ASSIGN_SYNC_W0_EL1 sys_reg(3, 0, 15, 15, 0)
+#define FHWB_ASSIGN_SYNC_W1_EL1 sys_reg(3, 0, 15, 15, 1)
+#define FHWB_ASSIGN_SYNC_W2_EL1 sys_reg(3, 0, 15, 15, 2)
+#define FHWB_ASSIGN_SYNC_W3_EL1 sys_reg(3, 0, 15, 15, 3)
+
+/* Field definitions for above registers */
+#define FHWB_INIT_SYNC_BB_EL1_MASK_FIELD GENMASK_ULL(44, 32)
+#define FHWB_INIT_SYNC_BB_EL1_BST_FIELD GENMASK_ULL(12, 0)
+#define FHWB_CTRL_EL1_EL1AE BIT_ULL(63)
+#define FHWB_CTRL_EL1_EL0AE BIT_ULL(62)
+#define FHWB_BST_BIT_EL1_CMG_FILED GENMASK_ULL(5, 4)
+#define FHWB_BST_BIT_EL1_PE_FILED GENMASK_ULL(3, 0)
+#define FHWB_ASSIGN_SYNC_W_EL1_VALID BIT_ULL(63)
+
+static enum cpuhp_state _hp_state;
+
+/*
+ * Each PE has its own CMG and Physical PE number (determined by BST_BIT_EL1 register).
+ * Barrier operation can be performed by PEs which belong to the same CMG.
+ */
+struct pe_info {
+ /* CMG number of this PE */
+ u8 cmg;
+ /* Physical PE number of this PE */
+ u8 ppe;
+};
+
+/* Hardware information of running system */
+struct hwb_hwinfo {
+ /* CPU type (part number) */
+ unsigned int type;
+ /* Number of CMG */
+ u8 num_cmg;
+ /* Number of barrier blade(BB) per CMG */
+ u8 num_bb;
+ /* Number of barrier window(BW) per PE */
+ u8 num_bw;
+ /*
+ * Maximum number of PE per CMG.
+ * Depending on BIOS configuration, each CMG has up to max_pe_per_cmg PEs
+ * and each PE has unique physical PE number between 0 ~ (max_pe_per_cmg-1)
+ */
+ u8 max_pe_per_cmg;
+
+ /* Bitmap for currently allocated BB per CMG */
+ unsigned long *used_bb_bmap;
+ /* Bitmap for currently allocated BW per PE */
+ unsigned long *used_bw_bmap;
+ /* Mapping table of cpuid -> CMG/PE number */
+ struct pe_info *core_map;
+};
+static struct hwb_hwinfo _hwinfo;
+
+/* List for barrier blade currently used per FD */
+struct hwb_private_data {
+ struct list_head bb_list;
+ spinlock_t list_lock;
+};
+
+/* Each barrier blade info */
+#define BB_FREEING 1
+struct bb_info {
+ /* cpumask for PEs which participate synchronization */
+ cpumask_var_t pemask;
+ /* cpumask for PEs which currently assigned BW for this BB */
+ cpumask_var_t assigned_pemask;
+ /* Added to hwb_private_data::bb_list */
+ struct list_head node;
+ /* For indicating if this bb is currently being freed or not */
+ unsigned long flag;
+ /* For waiting ongoing assign/unassign operation to finish before freeing BB */
+ wait_queue_head_t wq;
+ /* Track ongoing assign/unassign operation count */
+ atomic_t ongoing_assign_count;
+ /* CMG number of this blade */
+ u8 cmg;
+ /* BB number of this blade */
+ u8 bb;
+ /* Hold assigned window number of each PE corresponding to @assigned_pemask */
+ u8 *bw;
+ /* Track usage count as IOC_BB_FREE and IOC_BW_[UN]ASSIGN might be run in parallel */
+ struct kref kref;
+};
+static struct kmem_cache *bb_info_cachep;
+
+static const struct file_operations fujitsu_hwb_dev_fops = {
+ .owner = THIS_MODULE,
+};
+
+static struct miscdevice bar_miscdev = {
+ .fops = &fujitsu_hwb_dev_fops,
+ .minor = MISC_DYNAMIC_MINOR,
+ .mode = 0666,
+ .name = FHWB_DEV_NAME,
+};
+
+static void destroy_bb_info_cachep(void)
+{
+ kmem_cache_destroy(bb_info_cachep);
+}
+
+static int __init init_bb_info_cachep(void)
+{
+ /*
+ * Since cpumask value will be copied from userspace to the beginning of
+ * struct bb_info, use kmem_cache_create_usercopy to mark that region.
+ * Otherwise CONFIG_HARDENED_USERCOPY gives user_copy_warn.
+ */
+ bb_info_cachep = kmem_cache_create_usercopy("bb_info_cache", sizeof(struct bb_info),
+ 0, SLAB_HWCACHE_ALIGN, 0, sizeof(cpumask_var_t), NULL);
+ if (bb_info_cachep == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void free_map(void)
+{
+ kfree(_hwinfo.used_bw_bmap);
+ kfree(_hwinfo.used_bb_bmap);
+ kfree(_hwinfo.core_map);
+}
+
+static int __init alloc_map(void)
+{
+ _hwinfo.core_map = kcalloc(num_possible_cpus(), sizeof(struct pe_info), GFP_KERNEL);
+ _hwinfo.used_bb_bmap = kcalloc(_hwinfo.num_cmg, sizeof(unsigned long), GFP_KERNEL);
+ _hwinfo.used_bw_bmap = kcalloc(num_possible_cpus(), sizeof(unsigned long), GFP_KERNEL);
+ if (!_hwinfo.core_map || !_hwinfo.used_bb_bmap || !_hwinfo.used_bw_bmap)
+ goto fail;
+
+ /* 0 is valid number for both CMG/PE. Set all bits to 1 to represents uninitialized state */
+ memset(_hwinfo.core_map, 0xFF, sizeof(struct pe_info) * num_possible_cpus());
+
+ return 0;
+
+fail:
+ free_map();
+ return -ENOMEM;
+}
+
+/* Get this system's CPU type (part number). If it is not fujitsu CPU, return -1 */
+static int __init get_cpu_type(void)
+{
+ if (read_cpuid_implementor() != ARM_CPU_IMP_FUJITSU)
+ return -1;
+
+ return read_cpuid_part_number();
+}
+
+static int __init setup_hwinfo(void)
+{
+ int type;
+
+ type = get_cpu_type();
+ if (type < 0)
+ return -ENODEV;
+
+ _hwinfo.type = type;
+ switch (type) {
+ case FUJITSU_CPU_PART_A64FX:
+ _hwinfo.num_cmg = 4;
+ _hwinfo.num_bb = 6;
+ _hwinfo.num_bw = 4;
+ _hwinfo.max_pe_per_cmg = 13;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int hwb_cpu_online(unsigned int cpu)
+{
+ u64 val;
+ int i;
+
+ /* Setup core_map by reading BST_BIT_EL1 register of each PE */
+ val = read_sysreg_s(FHWB_BST_BIT_EL1);
+ _hwinfo.core_map[cpu].cmg = FIELD_GET(FHWB_BST_BIT_EL1_CMG_FILED, val);
+ _hwinfo.core_map[cpu].ppe = FIELD_GET(FHWB_BST_BIT_EL1_PE_FILED, val);
+
+ /* Since these registers' values are UNKNOWN on reset, explicitly clear all */
+ for (i = 0; i < _hwinfo.num_bw; i++)
+ write_bw_reg(i, 0);
+
+ write_sysreg_s(0, FHWB_CTRL_EL1);
+
+ return 0;
+}
+
+static int __init hwb_init(void)
+{
+ int ret;
+
+ ret = setup_hwinfo();
+ if (ret < 0) {
+ pr_err("Unsupported CPU type\n");
+ return ret;
+ }
+
+ ret = alloc_map();
+ if (ret < 0)
+ return ret;
+
+ ret = init_bb_info_cachep();
+ if (ret < 0)
+ goto out1;
+
+ /*
+ * Setup cpuhp callback to ensure each PE's resource will be initialized
+ * even if some PEs are offline at this point
+ */
+ ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "soc/fujitsu_hwb:online",
+ hwb_cpu_online, NULL);
+ if (ret < 0) {
+ pr_err("cpuhp setup failed: %d\n", ret);
+ goto out2;
+ }
+ _hp_state = ret;
+
+ ret = misc_register(&bar_miscdev);
+ if (ret < 0) {
+ pr_err("misc_register failed: %d\n", ret);
+ goto out3;
+ }
+
+ return 0;
+
+out3:
+ cpuhp_remove_state(_hp_state);
+out2:
+ destroy_bb_info_cachep();
+out1:
+ free_map();
+
+ return ret;
+}
+
+static void __exit hwb_exit(void)
+{
+ misc_deregister(&bar_miscdev);
+ cpuhp_remove_state(_hp_state);
+ destroy_bb_info_cachep();
+ free_map();
+}
+
+module_init(hwb_init);
+module_exit(hwb_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("FUJITSU LIMITED");
+MODULE_DESCRIPTION("FUJITSU HPC Hardware Barrier Driver");
--
2.26.2
More information about the linux-arm-kernel
mailing list