[PATCH v4 1/5] arm64: dts: imx8mq: Add NOC node

[Martin Kepplinger]

From: Leonard Crestez <leonard.crestez at nxp.com>

Add initial support for dynamic frequency scaling of the main NOC
on imx8mq.

Make DDRC the parent of the NOC (using passive governor) so that the
main NOC is automatically scaled together with DDRC by default.

Support for proactive scaling via interconnect will come on top.

Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
Acked-by: Georgi Djakov <georgi.djakov at linaro.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 24 +++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index a841a023e8e0..dbe480a76aa1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1158,6 +1158,30 @@
 			};
 		};
 
+		noc: interconnect at 32700000 {
+			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MQ_CLK_NOC>;
+			fsl,ddrc = <&ddrc>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133M {
+					opp-hz = /bits/ 64 <133333333>;
+				};
+
+				opp-400M {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-800M {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+			};
+		};
+
 		bus at 32c00000 { /* AIPS4 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;
-- 
2.20.1