[PATCH v3 1/6] arm64: dts: imx8mq: Add NOC node

[Shawn Guo]

On Thu, Dec 10, 2020 at 11:09:01AM +0100, Martin Kepplinger wrote:
> From: Leonard Crestez <leonard.crestez at nxp.com>
> 
> Add initial support for dynamic frequency scaling of the main NOC
> on imx8mq.
> 
> Make DDRC the parent of the NOC (using passive governor) so that the
> main NOC is automatically scaled together with DDRC by default.
> 
> Support for proactive scaling via interconnect will come on top.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>
> Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index a841a023e8e0..9c9d68a14e69 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1158,6 +1158,28 @@
>  			};
>  		};
>  
> +		noc: interconnect at 32700000 {
> +			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
> +			reg = <0x32700000 0x100000>;
> +			clocks = <&clk IMX8MQ_CLK_NOC>;
> +			fsl,ddrc = <&ddrc>;
> +			operating-points-v2 = <&noc_opp_table>;
> +
> +			noc_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-133M {
> +					opp-hz = /bits/ 64 <133333333>;
> +				};

Please have a newline between nodes.

Shawn

> +				opp-400M {
> +					opp-hz = /bits/ 64 <400000000>;
> +				};
> +				opp-800M {
> +					opp-hz = /bits/ 64 <800000000>;
> +				};
> +			};
> +		};
> +
>  		bus at 32c00000 { /* AIPS4 */
>  			compatible = "fsl,aips-bus", "simple-bus";
>  			reg = <0x32c00000 0x400000>;
> -- 
> 2.20.1
>