[PATCH v11 6/7] arm64: dts: mt8192: add svs device information
Roger Lu
roger.lu at mediatek.com
Wed Jan 6 21:43:55 EST 2021
add compitable/reg/irq/clock/efuse/reset setting in svs node
Signed-off-by: Roger Lu <roger.lu at mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 34 ++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 92dcfbd5a97f..5f0648730dda 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -224,6 +224,14 @@
compatible = "mediatek,mt8192-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
+
+ infracfg_rst: reset-controller {
+ compatible = "mediatek,infra-reset", "ti,syscon-reset";
+ #reset-cells = <1>;
+ ti,reset-bits = <
+ 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* 0: svs */
+ >;
+ };
};
pericfg: syscon at 10003000 {
@@ -318,6 +326,20 @@
status = "disabled";
};
+ svs: svs at 1100b000 {
+ compatible = "mediatek,mt8192-svs";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>,
+ <&lvts_e_data1>;
+ nvmem-cell-names = "svs-calibration-data",
+ "t-calibration-data";
+ resets = <&infracfg_rst 0>;
+ reset-names = "svs_rst";
+ };
+
spi1: spi at 11010000 {
compatible = "mediatek,mt8192-spi",
"mediatek,mt6765-spi";
@@ -422,6 +444,18 @@
#clock-cells = <1>;
};
+ efuse: efuse at 11c10000 {
+ compatible = "mediatek,efuse";
+ reg = <0 0x11c10000 0 0x1000>;
+
+ lvts_e_data1: data1 {
+ reg = <0x1C0 0x58>;
+ };
+ svs_calibration: calib at 580 {
+ reg = <0x580 0x68>;
+ };
+ };
+
i2c3: i2c3 at 11cb0000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11cb0000 0 0x1000>,
--
2.18.0
More information about the linux-arm-kernel
mailing list