[PATCH] dt-bindings: Add missing array size constraints
Mathieu Poirier
mathieu.poirier at linaro.org
Tue Jan 5 18:27:29 EST 2021
Adding Suman and Paul - guys please have a look.
On Mon, Jan 04, 2021 at 04:02:53PM -0700, Rob Herring wrote:
> DT properties which can have multiple entries need to specify what the
> entries are and define how many entries there can be. In the case of
> only a single entry, just 'maxItems: 1' is sufficient.
>
> Add the missing entry constraints. These were found with a modified
> meta-schema. Unfortunately, there are a few cases where the size
> constraints are not defined such as common bindings, so the meta-schema
> can't be part of the normal checks.
>
> Cc: Jens Axboe <axboe at kernel.dk>
> Cc: Stephen Boyd <sboyd at kernel.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: MyungJoo Ham <myungjoo.ham at samsung.com>
> Cc: Chanwoo Choi <cw00.choi at samsung.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> Cc: Jonathan Cameron <jic23 at kernel.org>
> Cc: Dmitry Torokhov <dmitry.torokhov at gmail.com>
> Cc: Thomas Gleixner <tglx at linutronix.de>
> Cc: Marc Zyngier <maz at kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab at kernel.org>
> Cc: Chen-Yu Tsai <wens at csie.org>
> Cc: Ulf Hansson <ulf.hansson at linaro.org>
> Cc: "David S. Miller" <davem at davemloft.net>
> Cc: Jakub Kicinski <kuba at kernel.org>
> Cc: Sebastian Reichel <sre at kernel.org>
> Cc: Ohad Ben-Cohen <ohad at wizery.com>
> Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-ide at vger.kernel.org
> Cc: linux-clk at vger.kernel.org
> Cc: dri-devel at lists.freedesktop.org
> Cc: linux-gpio at vger.kernel.org
> Cc: linux-iio at vger.kernel.org
> Cc: linux-input at vger.kernel.org
> Cc: linux-media at vger.kernel.org
> Cc: linux-mmc at vger.kernel.org
> Cc: netdev at vger.kernel.org
> Cc: linux-pm at vger.kernel.org
> Cc: linux-remoteproc at vger.kernel.org
> Cc: linux-riscv at lists.infradead.org
> Cc: linux-serial at vger.kernel.org
> Cc: alsa-devel at alsa-project.org
> Cc: linux-spi at vger.kernel.org
> Cc: linux-usb at vger.kernel.org
> ---
> .../socionext,uniphier-system-cache.yaml | 4 ++--
> .../bindings/ata/sata_highbank.yaml | 1 +
> .../bindings/clock/canaan,k210-clk.yaml | 1 +
> .../bindings/display/brcm,bcm2711-hdmi.yaml | 1 +
> .../bindings/display/brcm,bcm2835-hdmi.yaml | 1 +
> .../display/panel/jdi,lt070me05000.yaml | 1 +
> .../display/panel/mantix,mlaf057we51-x.yaml | 3 ++-
> .../display/panel/novatek,nt36672a.yaml | 1 +
> .../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +-
> .../devicetree/bindings/eeprom/at25.yaml | 3 +--
> .../bindings/extcon/extcon-ptn5150.yaml | 2 ++
> .../bindings/gpio/gpio-pca95xx.yaml | 1 +
> .../bindings/iio/adc/adi,ad7768-1.yaml | 2 ++
> .../bindings/iio/adc/aspeed,ast2400-adc.yaml | 1 +
> .../bindings/iio/adc/lltc,ltc2496.yaml | 2 +-
> .../bindings/iio/adc/qcom,spmi-vadc.yaml | 1 +
> .../bindings/iio/adc/st,stm32-adc.yaml | 2 ++
> .../iio/magnetometer/asahi-kasei,ak8975.yaml | 1 +
> .../iio/potentiometer/adi,ad5272.yaml | 1 +
> .../input/touchscreen/elan,elants_i2c.yaml | 1 +
> .../interrupt-controller/fsl,intmux.yaml | 2 +-
> .../interrupt-controller/st,stm32-exti.yaml | 2 ++
> .../allwinner,sun4i-a10-video-engine.yaml | 1 +
> .../devicetree/bindings/media/i2c/imx219.yaml | 1 +
> .../memory-controllers/exynos-srom.yaml | 2 ++
> .../bindings/misc/fsl,dpaa2-console.yaml | 1 +
> .../bindings/mmc/mmc-controller.yaml | 2 ++
> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 1 +
> .../bindings/net/ti,k3-am654-cpts.yaml | 1 +
> .../phy/allwinner,sun4i-a10-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun50i-a64-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun50i-h6-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun5i-a13-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun6i-a31-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun8i-a23-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun8i-a83t-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun8i-h3-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun8i-r40-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun8i-v3s-usb-phy.yaml | 2 ++
> .../phy/allwinner,sun9i-a80-usb-phy.yaml | 19 ++++++++-----------
> .../phy/socionext,uniphier-ahci-phy.yaml | 2 +-
> .../phy/socionext,uniphier-pcie-phy.yaml | 2 +-
> .../phy/socionext,uniphier-usb3hs-phy.yaml | 2 +-
> .../phy/socionext,uniphier-usb3ss-phy.yaml | 2 +-
> .../bindings/phy/ti,phy-gmii-sel.yaml | 2 +-
> .../pinctrl/aspeed,ast2400-pinctrl.yaml | 3 +--
> .../pinctrl/aspeed,ast2500-pinctrl.yaml | 4 ++--
> .../bindings/power/supply/bq25980.yaml | 1 +
> .../bindings/remoteproc/ingenic,vpu.yaml | 2 +-
> .../remoteproc/ti,omap-remoteproc.yaml | 3 +++
> .../bindings/riscv/sifive-l2-cache.yaml | 1 +
> .../bindings/serial/renesas,hscif.yaml | 2 ++
> .../bindings/serial/renesas,scif.yaml | 2 ++
> .../bindings/serial/renesas,scifa.yaml | 2 ++
> .../bindings/serial/renesas,scifb.yaml | 2 ++
> .../sound/allwinner,sun4i-a10-codec.yaml | 1 +
> .../bindings/sound/google,sc7180-trogdor.yaml | 1 +
> .../bindings/sound/samsung,aries-wm8994.yaml | 3 +++
> .../bindings/sound/samsung,midas-audio.yaml | 2 ++
> .../devicetree/bindings/sound/tas2562.yaml | 2 ++
> .../devicetree/bindings/sound/tas2770.yaml | 2 ++
> .../bindings/sound/tlv320adcx140.yaml | 1 +
> .../devicetree/bindings/spi/renesas,rspi.yaml | 2 ++
> .../devicetree/bindings/sram/sram.yaml | 2 ++
> .../timer/allwinner,sun4i-a10-timer.yaml | 2 ++
> .../bindings/timer/intel,ixp4xx-timer.yaml | 2 +-
> .../usb/allwinner,sun4i-a10-musb.yaml | 2 +-
> .../bindings/usb/brcm,usb-pinmap.yaml | 3 +++
> .../devicetree/bindings/usb/generic-ehci.yaml | 1 +
> .../devicetree/bindings/usb/generic-ohci.yaml | 1 +
> .../devicetree/bindings/usb/ingenic,musb.yaml | 2 +-
> .../bindings/usb/renesas,usbhs.yaml | 1 +
> .../devicetree/bindings/usb/ti,j721e-usb.yaml | 3 ++-
> .../bindings/usb/ti,keystone-dwc3.yaml | 2 ++
> 74 files changed, 118 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
> index 2e765bb3e6f6..7ca5375f278f 100644
> --- a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
> +++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
> @@ -30,8 +30,8 @@ properties:
> Interrupts can be used to notify the completion of cache operations.
> The number of interrupts should match to the number of CPU cores.
> The specified interrupts correspond to CPU0, CPU1, ... in this order.
> - minItems: 1
> - maxItems: 4
> + minItems: 1
> + maxItems: 4
>
> cache-unified: true
>
> diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
> index 5e2a2394e600..ce75d77e9289 100644
> --- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml
> +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
> @@ -61,6 +61,7 @@ properties:
> maxItems: 8
>
> calxeda,sgpio-gpio:
> + maxItems: 3
> description: |
> phandle-gpio bank, bit offset, and default on or off, which indicates
> that the driver supports SGPIO indicator lights using the indicated
> diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
> index 565ca468cb44..7f5cf4001f76 100644
> --- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
> +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
> @@ -22,6 +22,7 @@ properties:
> const: canaan,k210-clk
>
> clocks:
> + maxItems: 1
> description:
> Phandle of the SoC 26MHz fixed-rate oscillator clock.
>
> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> index 7ce06f9f9f8e..767edc0a7978 100644
> --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> @@ -60,6 +60,7 @@ properties:
> Phandle of the I2C controller used for DDC EDID probing
>
> hpd-gpios:
> + maxItems: 1
> description: >
> The GPIO pin for the HDMI hotplug detect (if it doesn't appear
> as an interrupt/status bit in the HDMI controller itself)
> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
> index f54b4e4808f0..031e35e76db2 100644
> --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
> @@ -37,6 +37,7 @@ properties:
> Phandle of the I2C controller used for DDC EDID probing
>
> hpd-gpios:
> + maxItems: 1
> description: >
> The GPIO pin for the HDMI hotplug detect (if it doesn't appear
> as an interrupt/status bit in the HDMI controller itself)
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> index b8b9435e464c..4f92365e888a 100644
> --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> @@ -30,6 +30,7 @@ properties:
> power supply for LCM (1.8V)
>
> dcdc-en-gpios:
> + maxItems: 1
> description: |
> phandle of the gpio for power ic line
> Power IC supply enable, High active
> diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
> index 51f423297ec8..aa5a0dc391a4 100644
> --- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
> @@ -37,7 +37,8 @@ properties:
>
> reset-gpios: true
>
> - 'mantix,tp-rstn-gpios':
> + mantix,tp-rstn-gpios:
> + maxItems: 1
> description: second reset line that triggers DSI config load
>
> backlight: true
> diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
> index 2f5df1d235ae..ef4c0a24512d 100644
> --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
> @@ -30,6 +30,7 @@ properties:
> panel. The novatek,nt36672a compatible shall always be provided as a fallback.
>
> reset-gpios:
> + maxItems: 1
> description: phandle of gpio for reset line - This should be 8mA, gpio
> can be configured using mux, pinctrl, pinctrl-names (active high)
>
> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> index 4cc011230153..7afc9f2be13a 100644
> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> @@ -21,7 +21,7 @@ properties:
> - fsl,imx8mp-dsp
>
> reg:
> - description: Should contain register location and length
> + maxItems: 1
>
> clocks:
> items:
> diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
> index 121a601db22e..6a2dc8b3ed14 100644
> --- a/Documentation/devicetree/bindings/eeprom/at25.yaml
> +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
> @@ -39,8 +39,7 @@ properties:
> - const: atmel,at25
>
> reg:
> - description:
> - Chip select number.
> + maxItems: 1
>
> spi-max-frequency: true
>
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
> index 4b0f414486d2..d5cfa32ea52d 100644
> --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
> +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
> @@ -19,6 +19,7 @@ properties:
> const: nxp,ptn5150
>
> int-gpios:
> + maxItems: 1
> deprecated: true
> description:
> GPIO pin (input) connected to the PTN5150's INTB pin.
> @@ -31,6 +32,7 @@ properties:
> maxItems: 1
>
> vbus-gpios:
> + maxItems: 1
> description:
> GPIO pin (output) used to control VBUS. If skipped, no such control
> takes place.
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
> index f5ee23c2df60..57cdcfd4ff3c 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
> +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
> @@ -81,6 +81,7 @@ properties:
> const: 2
>
> reset-gpios:
> + maxItems: 1
> description:
> GPIO specification for the RESET input. This is an active low signal to
> the PCA953x. Not valid for Maxim MAX732x devices.
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> index 924477dfb833..a85a28145ef6 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
> @@ -40,6 +40,7 @@ properties:
> ADC reference voltage supply
>
> adi,sync-in-gpios:
> + maxItems: 1
> description:
> Enables synchronization of multiple devices that require simultaneous
> sampling. A pulse is always required if the configuration is changed
> @@ -76,6 +77,7 @@ patternProperties:
>
> properties:
> reg:
> + maxItems: 1
> description: |
> The channel number.
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
> index 7f534a933e92..a726b6c2ab65 100644
> --- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
> @@ -23,6 +23,7 @@ properties:
> maxItems: 1
>
> clocks:
> + maxItems: 1
> description:
> Input clock used to derive the sample clock. Expected to be the
> SoC's APB clock.
> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> index 2716d4e95329..0bd2fc0356c8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> @@ -20,7 +20,7 @@ properties:
> description: Power supply for the reference voltage
>
> reg:
> - description: spi chipselect number according to the usual spi bindings
> + maxItems: 1
>
> spi-max-frequency:
> description: maximal spi bus frequency supported
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> index 95cc705b961b..74a4a9d95798 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -68,6 +68,7 @@ patternProperties:
>
> properties:
> reg:
> + maxItems: 1
> description: |
> ADC channel number.
> See include/dt-bindings/iio/qcom,spmi-vadc.h
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
> index 28417b31b558..6364ede9bb5f 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
> @@ -41,6 +41,8 @@ properties:
> maxItems: 2
>
> clocks:
> + minItems: 1
> + maxItems: 2
> description: |
> Core can use up to two clocks, depending on part used:
> - "adc" clock: for the analog circuitry, common to all ADCs.
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
> index a25590a16ba7..a0a1ffe017df 100644
> --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
> @@ -47,6 +47,7 @@ properties:
> description: an optional 3x3 mounting rotation matrix.
>
> reset-gpios:
> + maxItems: 1
> description: |
> an optional pin needed for AK09911 to set the reset state. This should
> be usually active low
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
> index 1aee9f9be951..0ebb6725a1af 100644
> --- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
> @@ -25,6 +25,7 @@ properties:
> maxItems: 1
>
> reset-gpios:
> + maxItems: 1
> description:
> Active low signal to the AD5272 RESET input.
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
> index a792d6377b1d..a9b53c2e6f0a 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
> @@ -29,6 +29,7 @@ properties:
> description: touchscreen can be used as a wakeup source.
>
> reset-gpios:
> + maxItems: 1
> description: reset gpio the chip is connected to.
>
> vcc33-supply:
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
> index 43c6effbb5bd..1d6e0f64a807 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
> @@ -31,7 +31,7 @@ properties:
> The 1st cell is hw interrupt number, the 2nd cell is channel index.
>
> clocks:
> - description: ipg clock.
> + maxItems: 1
>
> clock-names:
> const: ipg
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> index 2a5b29567926..6d3e68eb2e8b 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
> @@ -36,6 +36,8 @@ properties:
> Reference to a phandle of a hardware spinlock provider node.
>
> interrupts:
> + minItems: 1
> + maxItems: 96
> description:
> Interrupts references to primary interrupt controller
>
> diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
> index 2f7058f7760c..c34303b87a5b 100644
> --- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
> +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
> @@ -53,6 +53,7 @@ properties:
> maxItems: 1
>
> memory-region:
> + maxItems: 1
> description:
> CMA pool to use for buffers allocation instead of the default
> CMA pool.
> diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> index dfc4d29a4f04..184d33bd3828 100644
> --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
> @@ -40,6 +40,7 @@ properties:
> Digital core voltage supply, 1.2 volts
>
> reset-gpios:
> + maxItems: 1
> description: |-
> Reference to the GPIO connected to the xclr pin, if any.
> Must be released (set high) after all supplies are applied.
> diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> index 637e24f0f73b..c6e44f47ce7c 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> @@ -28,6 +28,8 @@ properties:
> const: 1
>
> ranges:
> + minItems: 1
> + maxItems: 4
> description: |
> Reflects the memory layout with four integer values per bank. Format:
> <bank-number> 0 <parent address of bank> <size>
> diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
> index 271a3eafc054..8cc951feb7df 100644
> --- a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
> +++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
> @@ -15,6 +15,7 @@ properties:
> const: "fsl,dpaa2-console"
>
> reg:
> + maxItems: 1
> description: A standard property. Specifies the region where the MCFBA
> (MC firmware base address) register can be found.
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> index 186f04ba9357..df4ee4c778ae 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> @@ -40,6 +40,7 @@ properties:
> There is no card detection available; polling must be used.
>
> cd-gpios:
> + maxItems: 1
> description:
> The card detection will be done using the GPIO provided.
>
> @@ -104,6 +105,7 @@ properties:
> line. Not used in combination with eMMC or SDIO.
>
> wp-gpios:
> + maxItems: 1
> description:
> GPIO to use for the write-protect detection.
>
> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> index c47b58f3e3f6..097c5cc6c853 100644
> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
> @@ -66,6 +66,7 @@ properties:
> dma-coherent: true
>
> clocks:
> + maxItems: 1
> description: CPSW2G NUSS functional clock
>
> clock-names:
> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
> index 9b7117920d90..2a42a27fb911 100644
> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
> @@ -59,6 +59,7 @@ properties:
> - const: cpts
>
> clocks:
> + maxItems: 1
> description: CPTS reference clock
>
> clock-names:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
> index 94ac23687b7e..77606c899fe2 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
> @@ -51,9 +51,11 @@ properties:
> - const: usb2_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
> index fd6e126fcf18..078af52b16ed 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
> @@ -50,9 +50,11 @@ properties:
> - const: usb1_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
> index 7670411002c9..e632140722a2 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
> @@ -50,9 +50,11 @@ properties:
> - const: usb3_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
> index 9b319381d1ad..5bad9b06e2e7 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
> @@ -45,9 +45,11 @@ properties:
> - const: usb1_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
> index b0ed01bbf3db..922b4665e00d 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
> @@ -54,9 +54,11 @@ properties:
> - const: usb2_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
> index b0674406f8aa..a94019efc2f3 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
> @@ -50,9 +50,11 @@ properties:
> - const: usb1_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
> index 48dc9c834a9b..33f3ddc0492d 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
> @@ -56,9 +56,11 @@ properties:
> - const: usb2_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
> index 60c344585276..f80431060803 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
> @@ -62,9 +62,11 @@ properties:
> - const: usb3_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
> index a2bb36790fbd..d947e50a49d2 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
> @@ -56,9 +56,11 @@ properties:
> - const: usb2_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
> index eadfd0c9493c..a2836c296cc4 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
> @@ -42,9 +42,11 @@ properties:
> const: usb0_reset
>
> usb0_id_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG ID pin
>
> usb0_vbus_det-gpios:
> + maxItems: 1
> description: GPIO to the USB OTG VBUS detect pin
>
> usb0_vbus_power-supply:
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
> index ded7d6f0a119..2eb493fa64fd 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
> @@ -22,7 +22,8 @@ properties:
>
> clocks:
> anyOf:
> - - description: Main PHY Clock
> + - maxItems: 1
> + description: Main PHY Clock
>
> - items:
> - description: Main PHY clock
> @@ -39,20 +40,16 @@ properties:
> - const: hsic_480M
>
> resets:
> - anyOf:
> + minItems: 1
> + items:
> - description: Normal USB PHY reset
> -
> - - items:
> - - description: Normal USB PHY reset
> - - description: HSIC Reset
> + - description: HSIC Reset
>
> reset-names:
> - oneOf:
> + minItems: 1
> + items:
> - const: phy
> -
> - - items:
> - - const: phy
> - - const: hsic
> + - const: hsic
>
> phy_type:
> const: hsic
> diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
> index 34756347a14e..745c525ce6b9 100644
> --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
> @@ -20,7 +20,7 @@ properties:
> - socionext,uniphier-pxs3-ahci-phy
>
> reg:
> - description: PHY register region (offset and length)
> + maxItems: 1
>
> "#phy-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
> index a06831fd64b9..3e0566899041 100644
> --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
> @@ -21,7 +21,7 @@ properties:
> - socionext,uniphier-pxs3-pcie-phy
>
> reg:
> - description: PHY register region (offset and length)
> + maxItems: 1
>
> "#phy-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
> index 6fa5caab1487..a681cbc3b4ef 100644
> --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
> @@ -24,7 +24,7 @@ properties:
> - socionext,uniphier-pxs3-usb3-hsphy
>
> reg:
> - description: PHY register region (offset and length)
> + maxItems: 1
>
> "#phy-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
> index 9d46715ed036..41c0dd68ee25 100644
> --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
> @@ -25,7 +25,7 @@ properties:
> - socionext,uniphier-pxs3-usb3-ssphy
>
> reg:
> - description: PHY register region (offset and length)
> + maxItems: 1
>
> "#phy-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
> index bcec422d7734..ff8a6d9eb153 100644
> --- a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
> @@ -55,7 +55,7 @@ properties:
> - ti,am654-phy-gmii-sel
>
> reg:
> - description: Address and length of the register set for the device
> + maxItems: 1
>
> '#phy-cells': true
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> index 54631dc1adb0..91be5720d094 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> @@ -23,8 +23,7 @@ properties:
> compatible:
> const: aspeed,ast2400-pinctrl
> reg:
> - description: |
> - A hint for the memory regions associated with the pin-controller
> + maxItems: 2
>
> patternProperties:
> '^.*$':
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> index a90c0fe0495f..40e9e8d4be5a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> @@ -24,8 +24,8 @@ properties:
> compatible:
> const: aspeed,ast2500-pinctrl
> reg:
> - description: |
> - A hint for the memory regions associated with the pin-controller
> + maxItems: 2
> +
> aspeed,external-nodes:
> minItems: 2
> maxItems: 2
> diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
> index f6b3dd4093ca..06eca6667f67 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
> @@ -70,6 +70,7 @@ properties:
> description: Enables bypass mode at boot time
>
> interrupts:
> + maxItems: 1
> description: |
> Indicates that the device state has changed.
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> index c019f9fbe916..d0aa91bbf5e5 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
> @@ -44,7 +44,7 @@ properties:
> - const: vpu
>
> interrupts:
> - description: VPU hardware interrupt
> + maxItems: 1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> index 084960a8f17a..1a1159097a2a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> @@ -70,10 +70,13 @@ properties:
> the firmware image.
>
> clocks:
> + maxItems: 1
> description: |
> Main functional clock for the remote processor
>
> resets:
> + minItems: 1
> + maxItems: 2
> description: |
> Reset handles for the remote processor
>
> diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> index efc0198eeb74..2ece8630dc68 100644
> --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> +++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
> @@ -63,6 +63,7 @@ properties:
> next-level-cache: true
>
> memory-region:
> + maxItems: 1
> description: |
> The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
> The reserved memory node should be defined as per the bindings in reserved-memory.txt.
> diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
> index c139c5edb93e..69533347aa57 100644
> --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
> +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
> @@ -81,6 +81,8 @@ properties:
> maxItems: 1
>
> dmas:
> + minItems: 2
> + maxItems: 4
> description:
> Must contain a list of pairs of references to DMA specifiers, one for
> transmission, and one for reception.
> diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
> index 672158906c33..22d76829f7ae 100644
> --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
> +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
> @@ -120,6 +120,8 @@ properties:
> maxItems: 1
>
> dmas:
> + minItems: 2
> + maxItems: 4
> description:
> Must contain a list of pairs of references to DMA specifiers, one for
> transmission, and one for reception.
> diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
> index dbffb9534835..3c67d3202e1b 100644
> --- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
> +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
> @@ -55,6 +55,8 @@ properties:
> maxItems: 1
>
> dmas:
> + minItems: 2
> + maxItems: 4
> description:
> Must contain a list of pairs of references to DMA specifiers, one for
> transmission, and one for reception.
> diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
> index 147f8a37e02a..d5571c7a4424 100644
> --- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
> +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
> @@ -55,6 +55,8 @@ properties:
> maxItems: 1
>
> dmas:
> + minItems: 2
> + maxItems: 4
> description:
> Must contain a list of pairs of references to DMA specifiers, one for
> transmission, and one for reception.
> diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
> index dd47fef9854d..559aff13ae23 100644
> --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
> +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
> @@ -88,6 +88,7 @@ properties:
> description: Phandle to the codec analog controls in the PRCM
>
> allwinner,pa-gpios:
> + maxItems: 1
> description: GPIO to enable the external amplifier
>
> required:
> diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
> index 5095b780e2c7..837e3faa63a9 100644
> --- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
> +++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
> @@ -55,6 +55,7 @@ patternProperties:
> maxItems: 1
>
> reg:
> + maxItems: 1
> description: dai link address.
>
> cpu:
> diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
> index 1c6947294825..5fff586dc802 100644
> --- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
> @@ -62,12 +62,15 @@ properties:
> description: Supply for the micbias on the headset mic
>
> earpath-sel-gpios:
> + maxItems: 1
> description: GPIO for switching between tv-out and mic paths
>
> headset-detect-gpios:
> + maxItems: 1
> description: GPIO for detection of headset insertion
>
> headset-key-gpios:
> + maxItems: 1
> description: GPIO for detection of headset key press
>
> io-channels:
> diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
> index 578928e67e5c..095775c598fa 100644
> --- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
> @@ -53,9 +53,11 @@ properties:
> description: Supply for the micbias on the Sub microphone
>
> fm-sel-gpios:
> + maxItems: 1
> description: GPIO pin for FM selection
>
> lineout-sel-gpios:
> + maxItems: 1
> description: GPIO pin for line out selection
>
> required:
> diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
> index 27f7132ba2ef..acd4bbe69731 100644
> --- a/Documentation/devicetree/bindings/sound/tas2562.yaml
> +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
> @@ -36,10 +36,12 @@ properties:
> I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
>
> shut-down-gpios:
> + maxItems: 1
> description: GPIO used to control the state of the device.
> deprecated: true
>
> shutdown-gpios:
> + maxItems: 1
> description: GPIO used to control the state of the device.
>
> interrupts:
> diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
> index 07e7f9951d2e..027bebf4e8cf 100644
> --- a/Documentation/devicetree/bindings/sound/tas2770.yaml
> +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
> @@ -27,9 +27,11 @@ properties:
> I2C address of the device can be between 0x41 to 0x48.
>
> reset-gpio:
> + maxItems: 1
> description: GPIO used to reset the device.
>
> shutdown-gpios:
> + maxItems: 1
> description: GPIO used to control the state of the device.
>
> interrupts:
> diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> index df18be9d7b15..54d64785aad2 100644
> --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> @@ -35,6 +35,7 @@ properties:
> I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
>
> reset-gpios:
> + maxItems: 1
> description: |
> GPIO used for hardware reset.
>
> diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
> index 10e83cb17e8d..8397f60d80a2 100644
> --- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
> +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
> @@ -68,6 +68,8 @@ properties:
> maxItems: 1
>
> dmas:
> + minItems: 2
> + maxItems: 4
> description:
> Must contain a list of pairs of references to DMA specifiers, one for
> transmission, and one for reception.
> diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
> index 19d116ff9ddc..2a62bb204bbe 100644
> --- a/Documentation/devicetree/bindings/sram/sram.yaml
> +++ b/Documentation/devicetree/bindings/sram/sram.yaml
> @@ -35,6 +35,7 @@ properties:
> maxItems: 1
>
> clocks:
> + maxItems: 1
> description:
> A list of phandle and clock specifier pair that controls the single
> SRAM clock.
> @@ -46,6 +47,7 @@ properties:
> const: 1
>
> ranges:
> + maxItems: 1
> description:
> Should translate from local addresses within the sram to bus addresses.
>
> diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
> index d918cee100ac..1c7cf32e7ac2 100644
> --- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
> @@ -22,6 +22,8 @@ properties:
> maxItems: 1
>
> interrupts:
> + minItems: 2
> + maxItems: 6
> description:
> List of timers interrupts
>
> diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> index 1a721d8af67a..a8de99b0c0f9 100644
> --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> @@ -18,7 +18,7 @@ properties:
> - const: intel,ixp4xx-timer
>
> reg:
> - description: Should contain registers location and length
> + maxItems: 1
>
> interrupts:
> minItems: 1
> diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
> index d9207bf9d894..0f520f17735e 100644
> --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
> +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
> @@ -39,7 +39,7 @@ properties:
> maxItems: 1
>
> phys:
> - description: PHY specifier for the OTG PHY
> + maxItems: 1
>
> phy-names:
> const: usb
> diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
> index ffa148b9eaa8..d4618d15ecc1 100644
> --- a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
> +++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
> @@ -22,6 +22,8 @@ properties:
> description: Interrupt for signals mirrored to out-gpios.
>
> in-gpios:
> + minItems: 1
> + maxItems: 2
> description: Array of one or two GPIO pins used for input signals.
>
> brcm,in-functions:
> @@ -33,6 +35,7 @@ properties:
> description: Array of enable and mask pairs, one per gpio in-gpios.
>
> out-gpios:
> + maxItems: 1
> description: Array of one GPIO pin used for output signals.
>
> brcm,out-functions:
> diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
> index 247ef00381ea..f76b25f7fc7a 100644
> --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
> +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
> @@ -83,6 +83,7 @@ properties:
> Phandle of a companion.
>
> phys:
> + maxItems: 1
> description: PHY specifier for the USB PHY
>
> phy-names:
> diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
> index 2178bcc401bc..8e2bd61f2075 100644
> --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
> +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
> @@ -71,6 +71,7 @@ properties:
> Overrides the detected port count
>
> phys:
> + maxItems: 1
> description: PHY specifier for the USB PHY
>
> phy-names:
> diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
> index 678396eeeb78..f506225a4d57 100644
> --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
> @@ -40,7 +40,7 @@ properties:
> - const: mc
>
> phys:
> - description: PHY specifier for the USB PHY
> + maxItems: 1
>
> usb-role-switch:
> type: boolean
> diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> index 54c361d4a7af..e67223d90bb7 100644
> --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
> @@ -68,6 +68,7 @@ properties:
> Integer to use BUSWAIT register.
>
> renesas,enable-gpio:
> + maxItems: 1
> description: |
> gpio specifier to check GPIO determining if USB function should be
> enabled.
> diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
> index 388245b91a55..adce36e48bc9 100644
> --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
> @@ -15,13 +15,14 @@ properties:
> - const: ti,j721e-usb
>
> reg:
> - description: module registers
> + maxItems: 1
>
> power-domains:
> description:
> PM domain provider node and an args specifier containing
> the USB device id value. See,
> Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> + maxItems: 1
>
> clocks:
> description: Clock phandles to usb2_refclk and lpm_clk
> diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
> index c1b19fc5d0a2..91ef374faba8 100644
> --- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
> @@ -43,12 +43,14 @@ properties:
> maxItems: 2
>
> power-domains:
> + maxItems: 1
> description: Should contain a phandle to a PM domain provider node
> and an args specifier containing the USB device id
> value. This property is as per the binding,
> Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>
> phys:
> + maxItems: 1
> description:
> PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY
> to be turned on before the controller.
> --
> 2.27.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list