[PATCH v4 2/2] firmware: arm_scmi: Add SCMI System Power Control driver
Cristian Marussi
cristian.marussi at arm.com
Tue Jan 5 08:09:45 EST 2021
Add an SCMI System Power control driver to handle platform's requests
carried by SYSTEM_POWER_STATE_NOTIFIER notifications: such platform
requested system-wide power state transitions are handled accordingly,
gracefully or forcefully, depending on the notifications' message flags.
Graceful requests are by default relayed to userspace using the same
Kernel API used to handle ACPI Shutdown bus events: alternatively, a few
available module parameters can be used to tunnel instead such requests to
userspace via signals addressed to CAD pid.
Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
---
This patch, building on top of the recently introduced SCMI System Power
Protocol support, adds a new SCMI driver which, registering for such SCMI
System Power notifications, acts accordingly to satisfy such SCMI plaform
system-wide transition requests.
Given that this driver is called to react on SCMI System Power events, it
is potentially needed very early on during boot, so it has not been made
configurable as a loadable module: if you decide to use it, makes no sense
not to have it builtin, since it has to be immediately ready once SCMI
subsystem is activated.
It is currently based on Linux v5.11-rc2.
Thanks,
Cristian
v3 --> v4
- rebased v5.11-rc2
- removed unneeded ugly usage of atomics and barriers
- simplfied SysPower shutdown state machine
- split out macro definition to different patch
v2 --> v3
- rebased
- some minor cleanup in codestyle and commit message
v1 --> v2
- split out of SCMI System Power Protocol series now merged
---
drivers/firmware/Kconfig | 12 +
drivers/firmware/arm_scmi/Makefile | 1 +
.../firmware/arm_scmi/scmi_power_control.c | 359 ++++++++++++++++++
3 files changed, 372 insertions(+)
create mode 100644 drivers/firmware/arm_scmi/scmi_power_control.c
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 3f14dffb9669..2b39453e9dd1 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -40,6 +40,18 @@ config ARM_SCMI_POWER_DOMAIN
will be called scmi_pm_domain. Note this may needed early in boot
before rootfs may be available.
+config ARM_SCMI_POWER_CONTROL
+ bool "SCMI system power control driver"
+ depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+ default n
+ help
+ This enables System Power control logic which binds system shutdown or
+ reboot actions to SCMI System Power notifications generated by SCP
+ firmware.
+
+ Graceful requests' methods and timeout and can be configured using
+ a few available module parameters.
+
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6a2ef63306d6..ddddb4636ebd 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -9,3 +9,4 @@ scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
$(scmi-transport-y)
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
+obj-$(CONFIG_ARM_SCMI_POWER_CONTROL) += scmi_power_control.o
diff --git a/drivers/firmware/arm_scmi/scmi_power_control.c b/drivers/firmware/arm_scmi/scmi_power_control.c
new file mode 100644
index 000000000000..216c2f031111
--- /dev/null
+++ b/drivers/firmware/arm_scmi/scmi_power_control.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SCMI Generic SystemPower Control driver.
+ *
+ * Copyright (C) 2020-2021 ARM Ltd.
+ */
+/**
+ * DOC: Theory of operation
+ *
+ * In order to handle platform originated SCMI SystemPower requests (like
+ * shutdowns or cold/warm resets) we register an SCMI Notification notifier
+ * block to react when such SCMI SystemPower events are emitted.
+ *
+ * Once such a notification is received we act accordingly to perform the
+ * required system transition depending on the kind of request.
+ *
+ * By default graceful requests are routed to userspace through the same
+ * API methods (orderly_poweroff/reboot()) used by ACPI when handling ACPI
+ * Shutdown bus events: alternatively, by properly setting a couple of module
+ * parameters (scmi_graceful_*_signum), it is possible to choose to use signals
+ * to CAD pid as a mean to communicate such graceful requests to userspace.
+ *
+ * Forceful requests, instead, will simply cause an immediate emergency_sync()
+ * and subsequent Kernel-only shutdown/reboot.
+ *
+ * Additionally, setting scmi_graceful_request_tmo_ms to a non-zero value, it
+ * is possible to convert a timed-out graceful request to a forceful one.
+ *
+ * The assumption here is that even graceful requests can be upper-bound by a
+ * maximum final timeout strictly enforced by the platform itself which can
+ * ultimately cut the power off at will anytime: in order to avoid such extreme
+ * scenario, when scmi_graceful_request_tmo_ms is non-zero, we track progress of
+ * graceful requests through the means of a reboot notifier converting timed-out
+ * graceful requests to forceful ones: in such a way at least we perform a
+ * clean sync and shutdown/restart before the power is cut.
+ *
+ * Given that such platform hard-timeout, if present, is anyway highly platform
+ * and event specific and not exposed at run-time by the SCMI SytemPower
+ * protocol, the parameter scmi_graceful_request_tmo_ms defaults to zero.
+ */
+
+#define pr_fmt(fmt) "SCMI SystemPower - " fmt
+
+#include <linux/bitfield.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/reboot.h>
+#include <linux/sched/signal.h>
+#include <linux/scmi_protocol.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+enum scmi_syspower_state {
+ SCMI_SYSPOWER_IDLE,
+ SCMI_SYSPOWER_IN_PROGRESS,
+ SCMI_SYSPOWER_REBOOTING
+};
+
+static enum scmi_syspower_state scmi_state;
+/* Protect access to scmi_state */
+static DEFINE_MUTEX(scmi_state_mtx);
+
+static enum scmi_system_events scmi_required_transition = SCMI_SYSTEM_MAX;
+
+static unsigned int scmi_graceful_poweroff_signum;
+static unsigned int scmi_graceful_reboot_signum;
+static unsigned int scmi_graceful_request_tmo_ms;
+
+static struct timer_list scmi_request_timer;
+static struct work_struct scmi_forceful_work;
+
+/**
+ * scmi_reboot_notifier - A reboot notifier to catch an ongoing successful
+ * system transition
+ * @nb: Reference to the related notifier block
+ * @reason: The reason for the ongoing reboot
+ * @__unused: The cmd being executed on a restart request (unused)
+ *
+ * When an ongoing system transition is detected, compatible with the one
+ * requested by SCMI, cancel the timer work.
+ * This is registered only when a valid SCMI SystemPower transition has been
+ * received and scmi_graceful_request_tmo_ms was non-zero.
+ *
+ * Return: NOTIFY_OK in any case
+ */
+static int scmi_reboot_notifier(struct notifier_block *nb,
+ unsigned long reason, void *__unused)
+{
+ mutex_lock(&scmi_state_mtx);
+ switch (reason) {
+ case SYS_HALT:
+ case SYS_POWER_OFF:
+ if (scmi_required_transition == SCMI_SYSTEM_SHUTDOWN)
+ scmi_state = SCMI_SYSPOWER_REBOOTING;
+ break;
+ case SYS_RESTART:
+ if (scmi_required_transition == SCMI_SYSTEM_COLDRESET ||
+ scmi_required_transition == SCMI_SYSTEM_WARMRESET)
+ scmi_state = SCMI_SYSPOWER_REBOOTING;
+ break;
+ default:
+ break;
+ }
+
+ if (scmi_state == SCMI_SYSPOWER_REBOOTING) {
+ pr_debug("Reboot in progress...cancel timer.\n");
+ del_timer_sync(&scmi_request_timer);
+ }
+ mutex_unlock(&scmi_state_mtx);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block scmi_reboot_nb = {
+ .notifier_call = &scmi_reboot_notifier,
+};
+
+static void scmi_request_forceful_transition(void);
+
+static void scmi_forceful_work_func(struct work_struct *work)
+{
+ if (system_state > SYSTEM_RUNNING)
+ return;
+
+ /* avoid deadlock unregistering reboot notifier */
+ unregister_reboot_notifier(&scmi_reboot_nb);
+
+ mutex_lock(&scmi_state_mtx);
+ if (scmi_state == SCMI_SYSPOWER_IN_PROGRESS)
+ scmi_request_forceful_transition();
+ mutex_unlock(&scmi_state_mtx);
+}
+
+/**
+ * scmi_request_timeout - On timeout trigger a forceful transition
+ * @t: The timer reference
+ *
+ * Actual work is deferred out of the timer IRQ context since shutdown/reboot
+ * code do not play well when !in_task().
+ */
+static void scmi_request_timeout(struct timer_list *t)
+{
+ pr_debug("Graceful request timed out...forcing !\n");
+
+ schedule_work(&scmi_forceful_work);
+}
+
+/**
+ * scmi_request_graceful_transition - Request graceful SystemPower transition
+ *
+ * Initiates the required SystemPower transition, requesting userspace
+ * co-operation: by default it uses the same orderly_ methods used by ACPI
+ * Shutdown event processing, while instead it uses a signal to CAD pid if
+ * any of the scmi_graceful_poweroff_ module params were non-zero.
+ *
+ * If scmi_graceful_request_tmo_ms is non zero, take care also to register a
+ * reboot notifier and a timer callback in order to detect if userspace actions
+ * are taking too long and in such a case fall back to a forceful transition.
+ */
+static void scmi_request_graceful_transition(void)
+{
+ if (scmi_graceful_request_tmo_ms) {
+ int ret;
+
+ ret = register_reboot_notifier(&scmi_reboot_nb);
+ if (!ret) {
+ INIT_WORK(&scmi_forceful_work, scmi_forceful_work_func);
+ scmi_request_timer.expires = jiffies +
+ msecs_to_jiffies(scmi_graceful_request_tmo_ms);
+ timer_setup(&scmi_request_timer,
+ scmi_request_timeout, 0);
+ add_timer(&scmi_request_timer);
+ } else {
+ /* Carry on best effort even without a reboot notifier */
+ pr_warn("Cannot register reboot notifier !\n");
+ }
+ }
+
+ pr_debug("Serving graceful request: %d (timeout_ms:%d)\n",
+ scmi_required_transition, scmi_graceful_request_tmo_ms);
+
+ switch (scmi_required_transition) {
+ case SCMI_SYSTEM_SHUTDOWN:
+ /*
+ * When received early at boot-time the 'orderly' branch will
+ * fail due to the lack of userspace itself, but the force=true
+ * argument will anyway enable us to trigger a successful forced
+ * shutdown.
+ */
+ if (!scmi_graceful_poweroff_signum)
+ orderly_poweroff(true);
+ else
+ kill_cad_pid(scmi_graceful_poweroff_signum, 1);
+ break;
+ case SCMI_SYSTEM_COLDRESET:
+ case SCMI_SYSTEM_WARMRESET:
+ if (!scmi_graceful_reboot_signum)
+ orderly_reboot();
+ else
+ kill_cad_pid(scmi_graceful_reboot_signum, 1);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * scmi_request_forceful_transition - Request forceful SystemPower transition
+ *
+ * Initiates the required SystemPower transition without involving userspace:
+ * just trigger the action at the kernel level after issuing an emergency sync.
+ */
+static void scmi_request_forceful_transition(void)
+{
+ pr_debug("Serving forceful request:%d\n", scmi_required_transition);
+
+ emergency_sync();
+ switch (scmi_required_transition) {
+ case SCMI_SYSTEM_SHUTDOWN:
+ kernel_power_off();
+ break;
+ case SCMI_SYSTEM_COLDRESET:
+ case SCMI_SYSTEM_WARMRESET:
+ kernel_restart(NULL);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * scmi_userspace_notifier - Notifier callback to act on SystemPower
+ * Notifications
+ * @nb: Reference to the related notifier block
+ * @event: The SystemPower notification event id
+ * @data: The SystemPower event report
+ *
+ * This callback is in charge of decoding the received SystemPower report
+ * and act accordingly triggering a graceful or forceful system transition.
+ *
+ * Note that once a valid SCMI SystemPower event starts being served, any
+ * other following SystemPower notification received from the same or any
+ * other SCMI instance (handle) will be ignored.
+ *
+ * Return: NOTIFY_OK once a valid SystemPower event has been successfully
+ * processed.
+ */
+static int scmi_userspace_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct scmi_system_power_state_notifier_report *er = data;
+
+ if (er->system_state >= SCMI_SYSTEM_POWERUP) {
+ pr_err("Ignoring invalid request: %d\n", er->system_state);
+ return NOTIFY_DONE;
+ }
+
+ /*
+ * Bail out if system is already shutting down or an SCMI SystemPower
+ * requested is already being served.
+ */
+ if (system_state > SYSTEM_RUNNING)
+ return NOTIFY_DONE;
+ mutex_lock(&scmi_state_mtx);
+ if (scmi_state != SCMI_SYSPOWER_IDLE) {
+ pr_debug("Transition already in progress...ignore.\n");
+ mutex_unlock(&scmi_state_mtx);
+ return NOTIFY_DONE;
+ }
+ scmi_state = SCMI_SYSPOWER_IN_PROGRESS;
+ mutex_unlock(&scmi_state_mtx);
+
+ scmi_required_transition = er->system_state;
+
+ /* Leaving a trace in logs of who triggered the shutdown/reboot. */
+ pr_info("Serving shutdown/reboot request: %d\n",
+ scmi_required_transition);
+
+ if (SCMI_SYSPOWER_IS_REQUEST_GRACEFUL(er->flags))
+ scmi_request_graceful_transition();
+ else
+ scmi_request_forceful_transition();
+
+ return NOTIFY_OK;
+}
+
+static int scmi_syspower_probe(struct scmi_device *sdev)
+{
+ int ret;
+ struct scmi_handle *handle = sdev->handle;
+ struct notifier_block *userspace_nb;
+
+ if (!handle)
+ return -ENODEV;
+
+ userspace_nb = devm_kzalloc(&sdev->dev, sizeof(*userspace_nb),
+ GFP_KERNEL);
+ if (!userspace_nb)
+ return -ENOMEM;
+
+ userspace_nb->notifier_call = &scmi_userspace_notifier;
+ ret = handle->notify_ops->register_event_notifier(handle,
+ SCMI_PROTOCOL_SYSTEM,
+ SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER,
+ NULL, userspace_nb);
+ if (!ret)
+ dev_set_drvdata(&sdev->dev, userspace_nb);
+
+ return ret;
+}
+
+static void scmi_syspower_remove(struct scmi_device *sdev)
+{
+ struct notifier_block *userspace_nb;
+
+ userspace_nb = dev_get_drvdata(&sdev->dev);
+ if (userspace_nb) {
+ const struct scmi_handle *handle = sdev->handle;
+
+ handle->notify_ops->unregister_event_notifier(handle,
+ SCMI_PROTOCOL_SYSTEM,
+ SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER,
+ NULL, userspace_nb);
+ }
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+ { SCMI_PROTOCOL_SYSTEM, "syspower" },
+ { },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_system_power_driver = {
+ .name = "scmi-system-power",
+ .probe = scmi_syspower_probe,
+ .remove = scmi_syspower_remove,
+ .id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_system_power_driver);
+
+module_param(scmi_graceful_request_tmo_ms, uint, 0644);
+MODULE_PARM_DESC(scmi_graceful_request_tmo_ms,
+ "Maximum time(ms) allowed to userspace for complying to the request. Unlimited if zero.");
+
+module_param(scmi_graceful_poweroff_signum, uint, 0644);
+MODULE_PARM_DESC(scmi_graceful_poweroff_signum,
+ "Signal to request graceful poweroff to CAD process. Ignored if zero.");
+
+module_param(scmi_graceful_reboot_signum, uint, 0644);
+MODULE_PARM_DESC(scmi_graceful_reboot_signum,
+ "Signal to request graceful reboot to CAD process. Ignored if zero.");
+
+MODULE_AUTHOR("Cristian Marussi <cristian.marussi at arm.com>");
+MODULE_DESCRIPTION("ARM SCMI SystemPower Control driver");
+MODULE_LICENSE("GPL v2");
--
2.17.1
More information about the linux-arm-kernel
mailing list