[PATCH v4 3/5] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0

[Krzysztof Kozlowski]

On Fri, Feb 26, 2021 at 12:54:02AM +0530, Jagan Teki wrote:
> Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> board.
> 
> Genaral features:
> - Ethernet 10/100
> - Wifi/BT
> - USB Type A/OTG
> - Audio Out
> - CAN
> - LVDS panel connector
> 
> i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
> 
> i.Core MX8M Mini needs to mount on top of this Carrier board for
> creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
> 
> Add support for it.
> 
> Signed-off-by: Matteo Lisi <matteo.lisi at engicam.com>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>

Best regards,
Krzysztof
> +	};
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +/* SD */
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
> +	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> +	max-frequency = <50000000>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	pm-ignore-notify;
> +	keep-power-in-suspend;
> +	status = "okay";
> +};
> -- 
> 2.25.1
>