[PATCH 3/7] dt-bindings: misc: Add binding for R-Car DAB

[Laurent Pinchart]

Hi Fabrizio,

Thank you for the patch.

On Thu, Feb 25, 2021 at 10:51:43PM +0000, Fabrizio Castro wrote:
> Document bindings for R-Car DAB hardware accelerator, currently
> found on the r8a77990 SoC (a.k.a. R-Car E3) and on the r8a77965
> SoC (a.k.a. R-Car M3-N).
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> ---
>  .../devicetree/bindings/misc/renesas,dab.yaml | 75 +++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/renesas,dab.yaml
> 
> diff --git a/Documentation/devicetree/bindings/misc/renesas,dab.yaml b/Documentation/devicetree/bindings/misc/renesas,dab.yaml
> new file mode 100644
> index 000000000000..e9494add13d7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/renesas,dab.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2021 Renesas Electronics Corporation
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/renesas,dab.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car DAB Hardware Accelerator
> +
> +maintainers:
> +  - Fabrizio Castro <fabrizio.castro.jz at renesas.com>
> +
> +description:
> +  The DAB hardware accelerator found on some R-Car devices is a hardware
> +  accelerator for software DAB demodulators.
> +  It consists of one FFT (Fast Fourier Transform) module and one decoder module,
> +  compatible with DAB specification (ETSI EN 300 401 and ETSI TS 102 563).
> +  The decoder module can perform FIC decoding and MSC decoding processing from
> +  de-puncture to final decoded result.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - renesas,dab-r8a77965     # R-Car M3-N
> +          - renesas,dab-r8a77990     # R-Car E3
> +      - const: renesas,rcar-gen3-dab # Generic fallback for R-Car Gen3 devices
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1

I usually try to describe clocks:

  clocks:
    items:
      - description: The module functional clock

but as there's a single clock, it may not be worth it. Up to you.

> +
> +  clock-names:
> +    const: dab

With Geert's and Sergei's comments addressed,

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  # R8A77990 (R-Car E3)
> +  - |
> +    #include <dt-bindings/clock/r8a77990-cpg-mssr.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/r8a77990-sysc.h>
> +
> +    dab: dab at e6730000 {
> +        compatible = "renesas,dab-r8a77990",
> +                     "renesas,rcar-gen3-dab";
> +        reg = <0xe6730000 0x120>;
> +        interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&cpg CPG_MOD 1016>;
> +        clock-names = "dab";
> +        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> +        resets = <&cpg 1016>;
> +        status = "disabled";
> +    };

-- 
Regards,

Laurent Pinchart