[PATCH v3 1/9] media: hevc: Modify structures to follow H265 ITU spec

Jernej Škrabec jernej.skrabec at siol.net
Thu Feb 25 13:05:55 EST 2021


Dne četrtek, 25. februar 2021 ob 18:34:48 CET je Ezequiel Garcia napisal(a):
> Hey Jernej,
> 
> On Thu, 2021-02-25 at 18:01 +0100, Jernej Škrabec wrote:
> > Hi Ezequiel,
> > 
> > Dne četrtek, 25. februar 2021 ob 14:09:52 CET je Ezequiel Garcia 
napisal(a):
> > > Hi Benjamin,
> > > 
> > > Thanks for the good work.
> > > 
> > > On Mon, 2021-02-22 at 13:23 +0100, Benjamin Gaignard wrote:
> > > > The H.265 ITU specification (section 7.4) define the general
> > > > slice segment header semantics.
> > > > Modified/added fields are:
> > > > - video_parameter_set_id: (7.4.3.1) identifies the VPS for
> > > > reference by other syntax elements.
> > > > - seq_parameter_set_id: (7.4.3.2.1) specifies the value of
> > > > the vps_video_parameter_set_id of the active VPS.
> > > > - chroma_format_idc: (7.4.3.2.1) specifies the chroma sampling
> > > >  relative to the luma sampling
> > > > - pic_parameter_set_id: (7.4.3.3.1) identifies the PPS for
> > > > reference by other syntax elements
> > > > - num_ref_idx_l0_default_active_minus1: (7.4.3.3.1) specifies
> > > > the inferred value of num_ref_idx_l0_active_minus1
> > > > - num_ref_idx_l1_default_active_minus1: (7.4.3.3.1) specifies
> > > > the inferred value of num_ref_idx_l1_active_minus1
> > > > - slice_segment_addr: (7.4.7.1) specifies the address of
> > > > the first coding tree block in the slice segment
> > > > - num_entry_point_offsets: (7.4.7.1) specifies the number of
> > > > entry_point_offset_minus1[ i ] syntax elements in the slice header
> > > > 
> > > > Add HEVC decode params contains the information used in section
> > > > "8.3 Slice decoding process" of the specification to let the hardware
> > > > perform decoding of a slices.
> > > > 
> > > > Adapt Cedrus driver according to these changes.
> > > > 
> > > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
> > > > ---
> > > > version 3:
> > > > - Add documentation about the new structuers and fields.
> > > > 
> > > > version 2:
> > > > - remove all change related to scaling
> > > > - squash commits to a coherent split
> > > > - be more verbose about the added fields
> > > > 
> > > >  .../media/v4l/ext-ctrls-codec.rst             | 126 ++++++++++++++
+---
> > > >  .../media/v4l/vidioc-queryctrl.rst            |   6 +
> > > >  drivers/media/v4l2-core/v4l2-ctrls.c          |  26 +++-
> > > >  drivers/staging/media/sunxi/cedrus/cedrus.c   |   6 +
> > > >  drivers/staging/media/sunxi/cedrus/cedrus.h   |   1 +
> > > >  .../staging/media/sunxi/cedrus/cedrus_dec.c   |   2 +
> > > >  .../staging/media/sunxi/cedrus/cedrus_h265.c  |   6 +-
> > > >  include/media/hevc-ctrls.h                    |  45 +++++--
> > > >  8 files changed, 186 insertions(+), 32 deletions(-)
> > > > 
> > > > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst 
b/
> > Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > index 00944e97d638..5e6d77e858c0 100644
> > > > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > @@ -3109,6 +3109,15 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> > > >      :stub-columns: 0
> > > >      :widths:       1 1 2
> > > >  
> > > > +    * - __u8
> > > > +      - ``video_parameter_set_id``
> > > > +      - Identifies the VPS for reference by other syntax elements
> > > > +    * - __u8
> > > > +      - ``seq_parameter_set_id̀``
> > > > +      - Specifies the value of the vps_video_parameter_set_id of the 
> > active VPS
> > > > +    * - __u8
> > > > +      - ``chroma_format_idc``
> > > > +      - Specifies the chroma sampling relative to the luma sampling
> > > 
> > > None of these fields seem needed for the Hantro G2 driver,
> > > so I suggest you drop them for now.
> > > 
> > > >      * - __u16
> > > >        - ``pic_width_in_luma_samples``
> > > >        -
> > > > @@ -3172,6 +3181,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> > > >      * - __u8
> > > >        - ``chroma_format_idc``
> > > >        -
> > > > +    * - __u8
> > > > +      - ``num_slices``
> > > > +
> > > 
> > > Not used, but also doesn't seem part of the SPS syntax. If we have to
> > > pass the number of slices, we'll need another mechanism.
> > > 
> > > >       -
> > > >      * - __u64
> > > >        - ``flags``
> > > >        - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>`
> > > > @@ -3231,9 +3243,18 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> > > >      :stub-columns: 0
> > > >      :widths:       1 1 2
> > > >  
> > > > +    * - __u8
> > > > +      - ``pic_parameter_set_id``
> > > > +      - Identifies the PPS for reference by other syntax elements
> > > 
> > > Not used.
> > > 
> > > >      * - __u8
> > > >        - ``num_extra_slice_header_bits``
> > > >        -
> > > > +    * - __u8
> > > > +      - ``num_ref_idx_l0_default_active_minus1``
> > > > +      - Specifies the inferred value of num_ref_idx_l0_active_minus1
> > > > +    * - __u8
> > > > +      - ``num_ref_idx_l1_default_active_minus1``
> > > > +      - Specifies the inferred value of num_ref_idx_l1_active_minus1
> > > >      * - __s8
> > > >        - ``init_qp_minus26``
> > > >        -
> > > > @@ -3342,6 +3363,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> > > >      * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT``
> > > >        - 0x00040000
> > > >        -
> > > > +    * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
> > > > +      - 0x00080000
> > > > +      -
> > > > +    * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING``
> > > > +      - 0x00100000
> > > > +      -
> > > >  
> > > 
> > > I suggest to do all the PPS control changes in a separate patch,
> > > feels easier to review and cleaner as you can explain the
> > > changes with more detail in the commit description.
> > > 
> > > Looking at the PPS syntax for tiles, I'm wondering if these
> > > deserve their own control, which would be used if tiles are enabled,
> > > i.e. V4L2_HEVC_PPS_FLAG_TILES_ENABLED is set.
> > > 
> > >         __u8    
num_tile_columns_minus1;                                         
> > >         __u8    
num_tile_rows_minus1;                                            
> > >         __u8    
column_width_minus1[20];                                         
> > >         __u8    row_height_minus1[22];    
> > > 
> > > Not something we necessarily have to tackle now.
> > > 
> > > >  ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)``
> > > >      Specifies various slice-specific parameters, especially from the 
NAL 
> > unit
> > > > @@ -3366,6 +3393,12 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> > > >      * - __u32
> > > >        - ``data_bit_offset``
> > > >        - Offset (in bits) to the video data in the current slice data.
> > > > +    * - __u32
> > > > +      - ``slice_segment_addr``
> > > > +      - Specifies the address of the first coding tree block in the 
slice 
> > segment
> > > 
> > > Not used.
> > > 
> > > > +    * - __u32
> > > > +      - ``num_entry_point_offsets``
> > > > +      - Specifies the number of entry_point_offset_minus1[ i ] syntax 
> > elements in the slice header
> > > 
> > > Not used.
> > 
> > While above two fields may not be used in Hantro, they are for sure useful 
for 
> > Cedrus and RPi4. I would like to keep them, otherwise with such approach 
HEVC 
> > will stay in staging for a long time. I'm still baffled why scaling matrix 
> > control was dropped. It would fit well in Cedrus and RPi4 driver and after 
a 
> > quick look, it seems that it was used in driver in later patch.
> > 
> 
> I'd like to make sure each modification we are making to the uAPI
> goes in the right direction, that is in the direction of moving
> the API out of staging.
> 
> Since reviewing each field is quite hard, and opens some discussions,
> I wanted to keep this patchset specific to what's needed for Hantro G2.
> 
> The Scaling matrix control is certainly a good one, as well as the ones
> needed for Cedrus and RPi4. However, I feel it's better to discuss
> them in their own "uAPI review" series so we can review all the changes
> with an API hat.
> 
> This way we decouple the Hantro G2 discussion and work from the API work.
> 
> Also please feel free to submit RFC patches fo Cedrus and RPi4
> (API and driver changes). We can certainly start the discussion around that,
> with driver changes in context.

I don't know much about RPi4 driver, only few implementation details, so 
you'll have to ping developer who wrote it. Regarding HEVC on Cedrus - it has 
one pain point - it needs entry point table which in turn needs support for 
variable arrays in order to be feasable AFAIK. I don't plan to develop that. 
Patches for scaling matrix and segment address were sent a bit more than a 
year ago but were turned down because they change control structures (among 
other things). Sorry to say, but I work on other things now, so Cedrus will 
have to wait. Alternatively, someone can take my patches from LibreELEC, 
update and submit them. They are in use for a long time.

Best regards,
Jernej

> 
> Hope I'm making sense here :)
> 
> Thanks,
> Ezequiel
> 
> > Best regards,
> > Jernej
> > 
> > > 
> > > >      * - __u8
> > > >        - ``nal_unit_type``
> > > >        -
> > > > @@ -3422,28 +3455,20 @@ enum v4l2_mpeg_video_hevc_size_of_length_field 
-
> > > >      * - __u8
> > > >        - ``pic_struct``
> > > >        -
> > > > -    * - __u8
> > > > -      - ``num_active_dpb_entries``
> > > > -      - The number of entries in ``dpb``.
> > > 
> > > Need to explain in the commit description why this field is moved.
> > > 
> > > >      * - __u8
> > > >        - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > >        - The list of L0 reference elements as indices in the DPB.
> > > >      * - __u8
> > > >        - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > >        - The list of L1 reference elements as indices in the DPB.
> > > > +    * - __u16
> > > > +      - ``short_term_ref_pic_set_size``
> > > > +
> > > 
> > > Not used.
> > > 
> > > >       -
> > > > +    * - __u16
> > > > +      - ``long_term_ref_pic_set_size``
> > > > +      -
> > > 
> > > Not used.
> > > 
> > > >      * - __u8
> > > > -      - ``num_rps_poc_st_curr_before``
> > > > -      - The number of reference pictures in the short-term set that 
come 
> > before
> > > > -        the current frame.
> > > 
> > > If this matches NumPocStCurrBefore from section 8.3.2 "Decoding process 
for 
> > reference picture set"
> > > then I would document that. And perhaps rename it to 
num_poc_st_curr_before.
> > > 
> > > > -    * - __u8
> > > > -      - ``num_rps_poc_st_curr_after``
> > > > -      - The number of reference pictures in the short-term set that 
come 
> > after
> > > > -        the current frame.
> > > 
> > > Ditto.
> > > 
> > > > -    * - __u8
> > > > -      - ``num_rps_poc_lt_curr``
> > > > -      - The number of reference pictures in the long-term set.
> > > 
> > > Ditto.
> > > 
> > > Also, I'd like the changes that move fields from 
> > V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS
> > > to the new V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS control, to be in 
their
> > > patch.
> > > 
> > > That will allow us to put in the commit description a proper
> > > explanation of why are fields being moved. Nothing fancy, simply
> > > explaining that these variables come from section 8.3.2
> > > "Decoding process for reference picture set", which describes
> > > a process invoked once per picture, so they are not per-slice.
> > > 
> > > > -    * - __u8
> > > > -      - ``padding[7]``
> > > > +      - ``padding``
> > > >        - Applications and drivers must set this to zero.
> > > >      * - struct :c:type:`v4l2_hevc_dpb_entry`
> > > >        - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > > @@ -3646,3 +3671,74 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
> > > >      so this has to come from client.
> > > >      This is applicable to H264 and valid Range is from 0 to 63.
> > > >      Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1.
> > > > +
> > > > +``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_PARAMS (struct)``
> > > > +    Specifies various decode parameters, especially the references 
picture 
> > order
> > > > +    count (POC) for all the lists (short, long, before, current, 
after) 
> > and the
> > > > +    number of entries for each of them.
> > > > +    These parameters are defined according to :ref:`hevc`.
> > > > +    They are described in section 8.3 "Slice decoding process" of the
> > > > +    specification.
> > > > +
> > > > +.. c:type:: v4l2_ctrl_hevc_decode_params
> > > > +
> > > > +.. cssclass:: longtable
> > > > +
> > > > +.. flat-table:: struct v4l2_ctrl_hevc_decode_params
> > > > +    :header-rows:  0
> > > > +    :stub-columns: 0
> > > > +    :widths:       1 1 2
> > > > +
> > > > +    * - __s32
> > > > +      - ``pic_order_cnt_val``
> > > > +      -
> > > 
> > > Can be documented as:
> > > 
> > > """
> > > PicOrderCntVal as described in section 8.3.1 "Decoding process
> > > for picture order count" of the specification.
> > > """
> > > 
> > > Note that snake case is used to match the kernel style,
> > > but other than that we try to keep the HEVC spec variable
> > > names.
> > > 
> > > > +    * - __u8
> > > > +      - ``num_active_dpb_entries``
> > > > +      - The number of entries in ``dpb``.
> > > > +    * - struct :c:type:`v4l2_hevc_dpb_entry`
> > > > +      - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > > +      - The decoded picture buffer, for meta-data about reference 
frames.
> > > 
> > > The DPB is here, but it seems it's also in the slice control?
> > > 
> > > > +    * - __u8
> > > > +      - ``num_rps_poc_st_curr_before``
> > > > +      - The number of reference pictures in the short-term set that 
come 
> > before
> > > > +        the current frame.
> > > > +    * - __u8
> > > > +      - ``num_rps_poc_st_curr_after``
> > > > +      - The number of reference pictures in the short-term set that 
come 
> > after
> > > > +        the current frame.
> > > > +    * - __u8
> > > > +      - ``num_rps_poc_lt_curr``
> > > > +      - The number of reference pictures in the long-term set.
> > > > +    * - __u8
> > > > +      - ``rps_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > > +      -
> > > > +    * - __u8
> > > > +      - ``rps_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > > +      -
> > > > +    * - __u8
> > > > +      - ``rps_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
> > > > +      -
> > > 
> > > Could you document these as well?
> > > 
> > > Thanks a lot,
> > > Ezequiel
> > > 
> > > 
> > 
> > 
> 
> 
> 





More information about the linux-arm-kernel mailing list