[PATCH V3 3/5] arm64: dts: imx8qxp: correct usdhc clock-names sequence

peng.fan at oss.nxp.com peng.fan at oss.nxp.com
Wed Feb 24 22:10:02 EST 2021


From: Peng Fan <peng.fan at nxp.com>

Per dt-bindings, the clock-names sequence should be ipg ahb per to pass
dtbs_check.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index e46faac1fe71..1d522de7b017 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -366,9 +366,9 @@ usdhc1: mmc at 5b010000 {
 			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b010000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
-			clock-names = "ipg", "per", "ahb";
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>;
+			clock-names = "ipg", "ahb", "per";
 			power-domains = <&pd IMX_SC_R_SDHC_0>;
 			status = "disabled";
 		};
@@ -378,9 +378,9 @@ usdhc2: mmc at 5b020000 {
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b020000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
-			clock-names = "ipg", "per", "ahb";
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>;
+			clock-names = "ipg", "ahb", "per";
 			power-domains = <&pd IMX_SC_R_SDHC_1>;
 			fsl,tuning-start-tap = <20>;
 			fsl,tuning-step= <2>;
@@ -392,9 +392,9 @@ usdhc3: mmc at 5b030000 {
 			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b030000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
-			clock-names = "ipg", "per", "ahb";
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>;
+			clock-names = "ipg", "ahb", "per";
 			power-domains = <&pd IMX_SC_R_SDHC_2>;
 			status = "disabled";
 		};
-- 
2.30.0




More information about the linux-arm-kernel mailing list