[PATCH v3 2/3] dt-bindings: usb: generic-ehci: document spurious-oc flag

[Álvaro Fernández Rojas]

Over-current reporting isn't supported on some platforms such as bcm63xx.
These devices will incorrectly report over-current if this flag isn't properly
activated.

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
 v3: no changes.
 v2: change flag name and improve documentation as suggested by Alan Stern.

 Documentation/devicetree/bindings/usb/generic-ehci.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index cf83f2d9afac..8089dc956ba3 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -122,6 +122,12 @@ properties:
     description:
       Set this flag to force EHCI reset after resume.
 
+  spurious-oc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag to indicate that the hardware sometimes turns on
+      the OC bit when an over-current isn't actually present.
+
   companion:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-- 
2.20.1