[PATCH v26 0/5] Add initial zynqmp R5 remoteproc driver

[Mathieu Poirier]

Good morning,

I have received your patchset but currently don't see having the time
to look at it before the middle of March.

Thanks,
Mathieu

On Tue, 23 Feb 2021 at 08:44, Ben Levinsky <ben.levinsky at xilinx.com> wrote:
>
> R5 is included in Xilinx Zynq UltraScale MPSoC so by adding this
> remotproc driver, we can boot the R5 sub-system in two different
> configurations -
>         * Split
>         * Lockstep
>
> The Xilinx R5 Remoteproc Driver boots the R5's via calls to the Xilinx
> Platform Management Unit that handles the R5 configuration, memory access
> and R5 lifecycle management. The interface to this manager is done in this
> driver via zynqmp_pm_* function calls.
>
> v26:
> - add prepare and unprepare to handle Xilinx platform management's
>   request_node and release node using each core's list of srams
>   that is constructed in each core's zynqmp_r5_probe.
> - add new field sram to zynqmp_r5_rproc to store each core's srams
>   being used as described in device tree. This helps to reduce unneeded looping
>   of the sram prop in device tree. As now only zynqmp_r5_probe has to parse
>   and validate each core's sram property. The ensuing prepare, unprepare
>   and parse_fw logic are now much simpler.
> - similarly add 'size' field to struct sram_addr_data to simplify
>   prepare, unprepare and parse_fw.
>
> Previous version:
> https://patchwork.kernel.org/project/linux-remoteproc/list/?series=412083
>
>
> Ben Levinsky (5):
>   firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
>     configuration.
>   firmware: xilinx: Add shutdown/wakeup APIs
>   firmware: xilinx: Add RPU configuration APIs
>   dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc
>     bindings
>   remoteproc: Add initial zynqmp R5 remoteproc driver
>
>  .../xilinx,zynqmp-r5-remoteproc.yaml          | 223 ++++
>  drivers/firmware/xilinx/zynqmp.c              |  96 ++
>  drivers/remoteproc/Kconfig                    |   8 +
>  drivers/remoteproc/Makefile                   |   1 +
>  drivers/remoteproc/zynqmp_r5_remoteproc.c     | 954 ++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h          |  64 ++
>  6 files changed, 1356 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
>  create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
>
> --
> 2.17.1
>