[PATCH v1 1/4] dt-bindings: add bindings for rk3568 clock controller

Johan Jonker jbx6244 at gmail.com
Tue Feb 23 05:50:25 EST 2021


Hi Elaine,

This is a new document.
Could you convert rockchip,rk3568-cru.txt to yaml?

To get an acked-by you must include:

robh+dt at kernel.org
devicetree at vger.kernel.org

./scripts/get_maintainer.pl --noroles --norolestats --nogit-fallback
--nogit <patch>

Your patch should show up here after filtering:
https://patchwork.ozlabs.org/project/devicetree-bindings/list/

Check with:

make ARCH=arm64 dt_binding_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml

./scripts/checkpatch.pl --strict <patch>


On 2/23/21 10:53 AM, Elaine Zhang wrote:
> Add devicetree bindings for Rockchip cru which found on
> Rockchip SoCs.
> 
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> ---
>  .../bindings/clock/rockchip,rk3568-cru.txt    | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> new file mode 100644
> index 000000000000..b1119aecb7c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> @@ -0,0 +1,66 @@
> +* Rockchip RK3568 Clock and Reset Unit
> +
> +The RK3568 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: PMU for CRU should be "rockchip,rk3568-pmucru"
> +- compatible: CRU should be "rockchip,rk3568-cru"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> +  If missing, pll rates are not changeable, due to the missing pll lock status.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. All available clocks are defined as
> +preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be
> +used in device tree sources. Similar macros exist for the reset sources in
> +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "xin32k" - rtc clock - optional,
> + - "i2sx_mclkin" - external I2S clock - optional,
> + - "xin_osc0_usbphyx_g" - external USBPHY clock - optional,
> + - "xin_osc0_mipidsiphyx_g" - external MIPIDSIPHY clock - optional,
> +
> +Example: Clock controller node:
> +
> +	pmucru: clock-controller at fdd00000 {
> +		compatible = "rockchip,rK3568-pmucru";
> +		reg = <0x0 0xfdd00000 0x0 0x1000>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +	cru: clock-controller at fdd20000 {
> +		compatible = "rockchip,rK3568-cru";
> +		reg = <0x0 0xfdd20000 0x0 0x1000>;
> +		rockchip,grf = <&grf>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +Example: UART controller node that consumes the clock generated by the clock
> +  controller:
> +
> +	uart1: serial at fe650000 {
> +		compatible = "rockchip,rK3568-uart", "snps,dw-apb-uart";
> +		reg = <0x0 0xfe650000 0x0 0x100>;
> +		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> +		clock-names = "baudclk", "apb_pclk";
> +	};
> 




More information about the linux-arm-kernel mailing list