[PATCH v2 2/2] arm64: dts: fsl: add support for Kontron pitx-imx8m board

[Krzysztof Kozlowski]

On Mon, Feb 22, 2021 at 03:07:56PM +0100, Heiko Thiery wrote:
> The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
> 
> Signed-off-by: Heiko Thiery <heiko.thiery at gmail.com>
> ---
> v2:
>  - bring root nodes in alphabetical order
>  - remove pinctrl_gpio_keys for pciewake
>  - remove pinctrl_sai2 and pinctrl_spdfif1 since it is not used yet
> 
>  Thanks to Michael Walle:
>  - add pinctrl for regulator-v-3v3-sd
>  - add name for regulator swbst
>  - add comment about currently unused audio codec
>  - put usb_phy entry in correct alphabetical order
> 
>  Thanks to Krzysztof Kozlowski:
>  - use generic names for pcie-refclk, tpm, fan-controller, sensor
>  - remove empty line
>  - fix group name to match schema (ecspi2cs -> ecspi2csgrp)
> 
> 
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../freescale/imx8mq-kontron-pitx-imx8m.dts   | 641 ++++++++++++++++++
>  2 files changed, 642 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> 

Looks fine to me, also with the changes pointed out by Micahel in other
email in this thread:
Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>

Best regards,
Krzysztof