[PATCH] hwrng: bcm2835: set quality to 1000

[Andrew Lunn]

On Sat, Feb 20, 2021 at 08:12:45PM +0100, Álvaro Fernández Rojas wrote:
> Hi Andrew,
> 
> I ran rngtest and this is what I got:
> root at OpenWrt:/# cat /dev/hwrng | rngtest -c 1000
> rngtest 6.10
> Copyright (c) 2004 by Henrique de Moraes Holschuh
> This is free software; see the source for copying conditions.  There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> 
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 20000032
> rngtest: FIPS 140-2 successes: 996
> rngtest: FIPS 140-2 failures: 4
> rngtest: FIPS 140-2(2001-10-10) Monobit: 0
> rngtest: FIPS 140-2(2001-10-10) Poker: 0
> rngtest: FIPS 140-2(2001-10-10) Runs: 1
> rngtest: FIPS 140-2(2001-10-10) Long run: 3
> rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
> rngtest: input channel speed: (min=146.002; avg=349.394;
> max=1302083.333)Kibits/s
> rngtest: FIPS tests speed: (min=12.126; avg=22.750; max=23.432)Mibits/s
> rngtest: Program run time: 56826982 microseconds
> 
> 996 successes and 4 failures -> 99.6% success rate
> 1024 * 99.6% = 1019 (rounded down to 1000)
> 
> I'm not sure if I can rely on rngtest for that...

Hi Álvaro

You need some sort of justification for setting the quality
value. Please include what you have written above in the commit
message. It then becomes possible for reviewers to say if this
justification is valid or not.

	Andrew