[RFC 01/19] clk: imx8mq: Replace critical with ignore_unused flag for dram_apb clock

[Abel Vesa]

In order to allow the dram_apb to be switched to a different parent,
we need to remove the CLK_IS_CRITICAL flag. This leads to clock
being disabled on clk_disabled_unused call, so add the
CLK_IGNORE_UNUSED instead to avoid that.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 drivers/clk/imx/clk-imx8mq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 4dd4ae9d022b..992210508411 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -481,7 +481,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	 */
 	hws[IMX8MQ_CLK_DRAM_CORE] = imx_clk_hw_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
 	hws[IMX8MQ_CLK_DRAM_ALT] = __imx8m_clk_hw_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000, CLK_GET_RATE_NOCACHE);
-	hws[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_hw_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080, CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE);
+	hws[IMX8MQ_CLK_DRAM_APB] = __imx8m_clk_hw_composite("dram_apb", imx8mq_dram_apb_sels, base + 0xa080, CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE);
 
 	/* IP */
 	hws[IMX8MQ_CLK_VPU_G1] = imx8m_clk_hw_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
-- 
2.29.2