[PATCH v3 0/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm
Guido Günther
agx at sigxcpu.org
Fri Feb 19 04:38:53 EST 2021
Hi,
On Wed, Dec 16, 2020 at 07:22:32PM +0100, Guido Günther wrote:
> This allows us to shut down the mipi power domain on the imx8. The alternative
> would be to drop the dphy from the mipi power domain in the SOCs device tree
> and only have the DSI host controller visible there but since the PD is mostly
> about the PHY that would defeat it's purpose.
Is there anything I can do to move that forward. I assume this needs to
go via the phy/ subsystem not drm?
Cheers,
-- Guido
>
> This is basically a resend from February 2020 which went without feedback.
>
> This allows to shut off the power domain hen blanking the LCD panel:
>
> pm_genpd_summary before:
>
> domain status slaves
> /device runtime status
> ----------------------------------------------------------------------
> mipi on
> /devices/platform/soc at 0/soc at 0:bus at 30800000/30a00300.dphy unsupported
> /devices/platform/soc at 0/soc at 0:bus at 30800000/30a00000.mipi_dsi suspended
>
> after:
>
> mipi off-0
> /devices/platform/soc at 0/soc at 0:bus at 30800000/30a00300.dphy suspended
> /devices/platform/soc at 0/soc at 0:bus at 30800000/30a00000.mipi_dsi suspended
>
> Changes from v1:
> - Tweak commit message slightly
>
> Changes from v2:
> - As pre review comment by Lucas Stach
> https://lore.kernel.org/linux-arm-kernel/ee22b072e0abe07559a3e6a63ccf6ece064a46cb.camel@pengutronix.de/
> Check for pm_runtime_get_sync failure
>
> Guido Günther (1):
> phy: fsl-imx8-mipi-dphy: Hook into runtime pm
>
> .../phy/freescale/phy-fsl-imx8-mipi-dphy.c | 25 ++++++++++++++++++-
> 1 file changed, 24 insertions(+), 1 deletion(-)
>
> --
> 2.29.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list