[PATCH v2 17/25] tty: serial: samsung_tty: Separate S3C64XX ops structure

[Krzysztof Kozlowski]

On Mon, Feb 15, 2021 at 09:17:05PM +0900, Hector Martin wrote:
> Instead of patching a single global ops structure depending on the port
> type, use a separate s3c64xx_serial_ops for the S3C64XX type. This
> allows us to mark the structures as const.
> 
> Also split out s3c64xx_serial_shutdown into a separate function now that
> we have a separate ops structure; this avoids excessive branching
> control flow and mirrors s3c64xx_serial_startup. tx_claimed and
> rx_claimed are only used in the S3C24XX functions.
> 
> Signed-off-by: Hector Martin <marcan at marcan.st>
> ---
>  drivers/tty/serial/samsung_tty.c | 69 ++++++++++++++++++++++++--------
>  1 file changed, 53 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 8ae3e03fbd8c..6b661f3ec1ae 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -1098,27 +1098,36 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
>  	struct s3c24xx_uart_port *ourport = to_ourport(port);
>  
>  	if (ourport->tx_claimed) {
> -		if (!s3c24xx_serial_has_interrupt_mask(port))
> -			free_irq(ourport->tx_irq, ourport);
> +		free_irq(ourport->tx_irq, ourport);
>  		ourport->tx_enabled = 0;
>  		ourport->tx_claimed = 0;
>  		ourport->tx_mode = 0;
>  	}
>  
>  	if (ourport->rx_claimed) {
> -		if (!s3c24xx_serial_has_interrupt_mask(port))
> -			free_irq(ourport->rx_irq, ourport);
> +		free_irq(ourport->rx_irq, ourport);
>  		ourport->rx_claimed = 0;
>  		ourport->rx_enabled = 0;
>  	}
>  
> -	/* Clear pending interrupts and mask all interrupts */
> -	if (s3c24xx_serial_has_interrupt_mask(port)) {
> -		free_irq(port->irq, ourport);
> +	if (ourport->dma)
> +		s3c24xx_serial_release_dma(ourport);
>  
> -		wr_regl(port, S3C64XX_UINTP, 0xf);
> -		wr_regl(port, S3C64XX_UINTM, 0xf);
> -	}
> +	ourport->tx_in_progress = 0;
> +}
> +
> +static void s3c64xx_serial_shutdown(struct uart_port *port)
> +{
> +	struct s3c24xx_uart_port *ourport = to_ourport(port);
> +
> +	free_irq(port->irq, ourport);
> +
> +	wr_regl(port, S3C64XX_UINTP, 0xf);
> +	wr_regl(port, S3C64XX_UINTM, 0xf);
> +
> +	ourport->tx_enabled = 0;
> +	ourport->tx_mode = 0;
> +	ourport->rx_enabled = 0;

For S3C64xx type this is not equivalent: the assignments were
happening before free_irq() and wr_regl(). Honestly I don't know whether
it matters (except some barriers coming from these functions) but please
do not change the order of code in this patch. If needed, the
re-ordering should be a patch on its own. With explanation why.

>  
>  	if (ourport->dma)
>  		s3c24xx_serial_release_dma(ourport);
> @@ -1193,9 +1202,7 @@ static int s3c64xx_serial_startup(struct uart_port *port)
>  
>  	/* For compatibility with s3c24xx Soc's */
>  	ourport->rx_enabled = 1;
> -	ourport->rx_claimed = 1;
>  	ourport->tx_enabled = 0;
> -	ourport->tx_claimed = 1;
>  
>  	spin_lock_irqsave(&port->lock, flags);
>  
> @@ -1631,6 +1638,29 @@ static struct uart_ops s3c24xx_serial_ops = {
>  #endif
>  };
>  
> +static const struct uart_ops s3c64xx_serial_ops = {
> +	.pm		= s3c24xx_serial_pm,
> +	.tx_empty	= s3c24xx_serial_tx_empty,
> +	.get_mctrl	= s3c24xx_serial_get_mctrl,
> +	.set_mctrl	= s3c24xx_serial_set_mctrl,
> +	.stop_tx	= s3c24xx_serial_stop_tx,
> +	.start_tx	= s3c24xx_serial_start_tx,
> +	.stop_rx	= s3c24xx_serial_stop_rx,
> +	.break_ctl	= s3c24xx_serial_break_ctl,
> +	.startup	= s3c64xx_serial_startup,
> +	.shutdown	= s3c64xx_serial_shutdown,
> +	.set_termios	= s3c24xx_serial_set_termios,
> +	.type		= s3c24xx_serial_type,
> +	.release_port	= s3c24xx_serial_release_port,
> +	.request_port	= s3c24xx_serial_request_port,
> +	.config_port	= s3c24xx_serial_config_port,
> +	.verify_port	= s3c24xx_serial_verify_port,
> +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
> +	.poll_get_char = s3c24xx_serial_get_poll_char,
> +	.poll_put_char = s3c24xx_serial_put_poll_char,
> +#endif
> +};
> +

Make the s3c24xx_serial_ops const as well.

Best regards,
Krzysztof