[PATCH v2 2/4] net: stmmac: Add Toshiba Visconti SoCs glue driver

[Nobuhiro Iwamatsu]

Hi,

On Sun, Feb 14, 2021 at 08:23:25AM +0200, Leon Romanovsky wrote:
> On Fri, Feb 12, 2021 at 11:58:04AM +0900, Nobuhiro Iwamatsu wrote:
> > Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs.
> > This patch contains only the basic function of the device. There is no
> > clock control, PM, etc. yet. These will be added in the future.
> >
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu at toshiba.co.jp>
> > ---
> >  drivers/net/ethernet/stmicro/stmmac/Kconfig   |   8 +
> >  drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
> >  .../ethernet/stmicro/stmmac/dwmac-visconti.c  | 288 ++++++++++++++++++
> >  3 files changed, 297 insertions(+)
> >  create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > index 53f14c5a9e02..55ba67a550b9 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> > @@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT
> >  	  This selects the Intel platform specific glue layer support for
> >  	  the stmmac device driver. This driver is used for the Intel Keem Bay
> >  	  SoC.
> > +
> > +config DWMAC_VISCONTI
> > +	bool "Toshiba Visconti DWMAC support"
> > +	def_bool y
> 
> Doesn't it need to be "default y"?
> 

Indeed. I will remove this.

Thanks.

Best regards,
  Nobuhiro