linux-next: manual merge of the arm-soc tree with the arm tree

[Stephen Rothwell]

Hi all,

On Tue, 2 Feb 2021 09:01:35 +1100 Stephen Rothwell <sfr at canb.auug.org.au> wrote:
>
> Today's linux-next merge of the arm-soc tree got a conflict in:
> 
>   arch/arm/Kconfig.debug
> 
> between commits:
> 
>   9ca4efec0aba ("ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART")
>   6e959ad8bb90 ("ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support")
> 
> from the arm tree and commits:
> 
>   f3a732843acc ("ARM: remove sirf prima2/atlas platforms")
>   89d4f98ae90d ("ARM: remove zte zx platform")
> 
> from the arm-soc tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> diff --cc arch/arm/Kconfig.debug
> index 7a8697a97c98,c36c5d4c6e9c..000000000000
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@@ -1623,10 -1546,7 +1550,9 @@@ config DEBUG_LL_INCLUD
>   	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
>   	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
>   	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
> - 	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
>  -	default "debug/sti.S" if DEBUG_STI_UART
>  +	default "debug/sti.S" if DEBUG_STIH41X_ASC2
>  +	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
>  +	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
>   	default "debug/stm32.S" if DEBUG_STM32_UART
>   	default "debug/tegra.S" if DEBUG_TEGRA_UART
>   	default "debug/ux500.S" if DEBUG_UX500_UART
> @@@ -1659,8 -1579,6 +1585,7 @@@ config DEBUG_UART_PHY
>   	default 0x02531000 if DEBUG_KEYSTONE_UART1
>   	default 0x03010fe0 if ARCH_RPC
>   	default 0x07000000 if DEBUG_SUN9I_UART0
> - 	default 0x09405000 if DEBUG_ZTE_ZX
>  +	default 0x09530000 if DEBUG_STIH418_SBC_ASC0
>   	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
>   				DEBUG_VEXPRESS_UART0_CA9
>   	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
> @@@ -1789,10 -1698,8 +1707,10 @@@
>   		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
>   		DEBUG_S3C64XX_UART || \
>   		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
> - 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
> + 		DEBUG_DIGICOLOR_UA0 || \
>  -		DEBUG_AT91_UART || DEBUG_STM32_UART
>  +		DEBUG_AT91_UART || DEBUG_STM32_UART || \
>  +		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
>  +		DEBUG_STIH418_SBC_ASC0
>   
>   config DEBUG_UART_VIRT
>   	hex "Virtual base address of debug UART"
> @@@ -1854,12 -1760,9 +1772,11 @@@
>   	default 0xfb020000 if DEBUG_OMAP3UART3
>   	default 0xfb042000 if DEBUG_OMAP3UART4
>   	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
> - 	default 0xfc705000 if DEBUG_ZTE_ZX
>   	default 0xfcfe8600 if DEBUG_BCM63XX_UART
>   	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
>  +	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
>   	default 0xfd883000 if DEBUG_ALPINE_UART0
>  +	default 0xfdd32000 if DEBUG_STIH41X_ASC2
>   	default 0xfe010000 if STM32MP1_DEBUG_UART
>   	default 0xfe017000 if DEBUG_MMP_UART2
>   	default 0xfe018000 if DEBUG_MMP_UART3
> @@@ -1904,10 -1802,8 +1816,10 @@@
>   		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
>   		DEBUG_S3C64XX_UART || \
>   		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
> - 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
> + 		DEBUG_DIGICOLOR_UA0 || \
>  -		DEBUG_AT91_UART || DEBUG_STM32_UART
>  +		DEBUG_AT91_UART || DEBUG_STM32_UART || \
>  +		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
>  +		DEBUG_STIH418_SBC_ASC0
>   
>   config DEBUG_UART_8250_SHIFT
>   	int "Register offset shift for the 8250 debug UART"

With the merge window about to open, this is a reminder that this
conflict still exists.

-- 
Cheers,
Stephen Rothwell
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20210215/5b2d70c2/attachment.sig>