[PATCH v8 01/22] docs: counter: Consolidate Counter sysfs attributes documentation
Jonathan Cameron
jic23 at kernel.org
Sun Feb 14 11:57:52 EST 2021
On Fri, 12 Feb 2021 21:13:25 +0900
William Breathitt Gray <vilhelm.gray at gmail.com> wrote:
> Duplicate ABIs are not valid, so let's consolidate these sysfs
> attributes into the main sysfs-bus-counter documentation file.
This is sensible to do, but is there any duplicate ABI? I went
looking for any resulting build problems and couldn't see what was
actually duplicated.
Jonathan
>
> Cc: Patrick Havelange <patrick.havelange at essensium.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray at gmail.com>
> ---
> Documentation/ABI/testing/sysfs-bus-counter | 76 ++++++++++++++++++-
> .../ABI/testing/sysfs-bus-counter-104-quad-8 | 61 ---------------
> .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ----
> MAINTAINERS | 4 +-
> 4 files changed, 75 insertions(+), 82 deletions(-)
> delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
> delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
> index 566bd99fe0a5..29f54484183f 100644
> --- a/Documentation/ABI/testing/sysfs-bus-counter
> +++ b/Documentation/ABI/testing/sysfs-bus-counter
> @@ -57,6 +57,7 @@ Description:
> What: /sys/bus/counter/devices/counterX/countY/count_mode_available
> What: /sys/bus/counter/devices/counterX/countY/error_noise_available
> What: /sys/bus/counter/devices/counterX/countY/function_available
> +What: /sys/bus/counter/devices/counterX/countY/prescaler_available
> What: /sys/bus/counter/devices/counterX/countY/signalZ_action_available
> KernelVersion: 5.2
> Contact: linux-iio at vger.kernel.org
> @@ -154,6 +155,15 @@ Description:
> Count Y. If possible, this should match the name of the
> respective channel as it appears in the device datasheet.
>
> +What: /sys/bus/counter/devices/counterX/countY/prescaler
> +KernelVersion: 5.2
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Configure the prescaler value associated with Count Y.
> + On the FlexTimer, the counter clock source passes through a
> + prescaler (i.e. a counter). This acts like a clock
> + divider.
> +
> What: /sys/bus/counter/devices/counterX/countY/preset
> KernelVersion: 5.2
> Contact: linux-iio at vger.kernel.org
> @@ -215,11 +225,45 @@ Description:
> Read-only attribute that indicates the total number of Signals
> belonging to the Counter.
>
> -What: /sys/bus/counter/devices/counterX/signalY/signal
> +What: /sys/bus/counter/devices/counterX/signalY/cable_fault
> +KernelVersion: 5.7
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Read-only attribute that indicates whether a differential
> + encoder cable fault (not connected or loose wires) is detected
> + for the respective channel of Signal Y. Valid attribute values
> + are boolean. Detection must first be enabled via the
> + corresponding cable_fault_enable attribute.
> +
> +What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable
> +KernelVersion: 5.7
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Whether detection of differential encoder cable faults for the
> + respective channel of Signal Y is enabled. Valid attribute
> + values are boolean.
> +
> +What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
> +KernelVersion: 5.7
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Filter clock factor for input Signal Y. This prescaler value
> + affects the inputs of both quadrature pair signals.
> +
> +What: /sys/bus/counter/devices/counterX/signalY/index_polarity
> KernelVersion: 5.2
> Contact: linux-iio at vger.kernel.org
> Description:
> - Signal data of Signal Y represented as a string.
> + Active level of index input Signal Y; irrelevant in
> + non-synchronous load mode.
> +
> +What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available
> +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
> +KernelVersion: 5.2
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Discrete set of available values for the respective Signal Y
> + configuration are listed in this file.
>
> What: /sys/bus/counter/devices/counterX/signalY/name
> KernelVersion: 5.2
> @@ -228,3 +272,31 @@ Description:
> Read-only attribute that indicates the device-specific name of
> Signal Y. If possible, this should match the name of the
> respective signal as it appears in the device datasheet.
> +
> +What: /sys/bus/counter/devices/counterX/signalY/signal
> +KernelVersion: 5.2
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Signal data of Signal Y represented as a string.
> +
> +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode
> +KernelVersion: 5.2
> +Contact: linux-iio at vger.kernel.org
> +Description:
> + Configure the counter associated with Signal Y for
> + non-synchronous or synchronous load mode. Synchronous load mode
> + cannot be selected in non-quadrature (Pulse-Direction) clock
> + mode.
> +
> + non-synchronous:
> + A logic low level is the active level at this index
> + input. The index function (as enabled via preset_enable)
> + is performed directly on the active level of the index
> + input.
> +
> + synchronous:
> + Intended for interfacing with encoder Index output in
> + quadrature clock mode. The active level is configured
> + via index_polarity. The index function (as enabled via
> + preset_enable) is performed synchronously with the
> + quadrature clock on the active level of the index input.
> diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
> deleted file mode 100644
> index eac32180c40d..000000000000
> --- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
> +++ /dev/null
> @@ -1,61 +0,0 @@
> -What: /sys/bus/counter/devices/counterX/signalY/cable_fault
> -KernelVersion: 5.7
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Read-only attribute that indicates whether a differential
> - encoder cable fault (not connected or loose wires) is detected
> - for the respective channel of Signal Y. Valid attribute values
> - are boolean. Detection must first be enabled via the
> - corresponding cable_fault_enable attribute.
> -
> -What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable
> -KernelVersion: 5.7
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Whether detection of differential encoder cable faults for the
> - respective channel of Signal Y is enabled. Valid attribute
> - values are boolean.
> -
> -What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
> -KernelVersion: 5.7
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Filter clock factor for input Signal Y. This prescaler value
> - affects the inputs of both quadrature pair signals.
> -
> -What: /sys/bus/counter/devices/counterX/signalY/index_polarity
> -KernelVersion: 5.2
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Active level of index input Signal Y; irrelevant in
> - non-synchronous load mode.
> -
> -What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available
> -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
> -KernelVersion: 5.2
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Discrete set of available values for the respective Signal Y
> - configuration are listed in this file.
> -
> -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode
> -KernelVersion: 5.2
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Configure the counter associated with Signal Y for
> - non-synchronous or synchronous load mode. Synchronous load mode
> - cannot be selected in non-quadrature (Pulse-Direction) clock
> - mode.
> -
> - non-synchronous:
> - A logic low level is the active level at this index
> - input. The index function (as enabled via preset_enable)
> - is performed directly on the active level of the index
> - input.
> -
> - synchronous:
> - Intended for interfacing with encoder Index output in
> - quadrature clock mode. The active level is configured
> - via index_polarity. The index function (as enabled via
> - preset_enable) is performed synchronously with the
> - quadrature clock on the active level of the index input.
> diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> deleted file mode 100644
> index 7d2e7b363467..000000000000
> --- a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -What: /sys/bus/counter/devices/counterX/countY/prescaler_available
> -KernelVersion: 5.2
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Discrete set of available values for the respective Count Y
> - configuration are listed in this file. Values are delimited by
> - newline characters.
> -
> -What: /sys/bus/counter/devices/counterX/countY/prescaler
> -KernelVersion: 5.2
> -Contact: linux-iio at vger.kernel.org
> -Description:
> - Configure the prescaler value associated with Count Y.
> - On the FlexTimer, the counter clock source passes through a
> - prescaler (i.e. a counter). This acts like a clock
> - divider.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e697044d34d6..d858582c917b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -297,7 +297,6 @@ M: William Breathitt Gray <vilhelm.gray at gmail.com>
> M: Syed Nayyar Waris <syednwaris at gmail.com>
> L: linux-iio at vger.kernel.org
> S: Maintained
> -F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
> F: drivers/counter/104-quad-8.c
>
> ACCES PCI-IDIO-16 GPIO DRIVER
> @@ -4540,7 +4539,7 @@ COUNTER SUBSYSTEM
> M: William Breathitt Gray <vilhelm.gray at gmail.com>
> L: linux-iio at vger.kernel.org
> S: Maintained
> -F: Documentation/ABI/testing/sysfs-bus-counter*
> +F: Documentation/ABI/testing/sysfs-bus-counter
> F: Documentation/driver-api/generic-counter.rst
> F: drivers/counter/
> F: include/linux/counter.h
> @@ -6925,7 +6924,6 @@ FLEXTIMER FTM-QUADDEC DRIVER
> M: Patrick Havelange <patrick.havelange at essensium.com>
> L: linux-iio at vger.kernel.org
> S: Maintained
> -F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec
> F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt
> F: drivers/counter/ftm-quaddec.c
>
More information about the linux-arm-kernel
mailing list