[PATCH v2 0/4] Add support for CP110 UTMI PHY

[kostap at marvell.com]

From: Konstantin Porotchkin <kostap at marvell.com>

This series of patches adds a new PHY driver for supporting CP110 UTMI
PHY in Linux. Currently the functionality of USB ports connected to
this PHY depends on boot loader setup.
The new driver eliminates kernel configuration dependency from the boot
loader. 

v2:
- extend the comment about reference clock 
- fix driver probe function, add some prints
- move to usage of dr_mode from connected USB controller instead of
  dedicated device tree property

Konstantin Porotchkin (4):
  drivers: phy: add support for Armada CP110 UTMI PHY
  devicetree/bindings: add support for CP110 UTMI driver
  arch/arm64: dts: add support for Marvell CP110 UTMI driver
  arch/arm64: dts: enable CP110 UTMI driver

 .../bindings/phy/phy-mvebu-utmi.txt           |  78 +++-
 .../arm64/boot/dts/marvell/armada-7040-db.dts |  14 +-
 .../arm64/boot/dts/marvell/armada-8040-db.dts |  21 +-
 .../boot/dts/marvell/armada-8040-mcbin.dtsi   |  19 +-
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |  19 +
 arch/arm64/boot/dts/marvell/cn9130-db.dts     |  12 +-
 arch/arm64/boot/dts/marvell/cn9131-db.dts     |   9 +-
 arch/arm64/boot/dts/marvell/cn9132-db.dts     |  11 +-
 drivers/phy/marvell/Kconfig                   |   8 +
 drivers/phy/marvell/Makefile                  |   1 +
 drivers/phy/marvell/phy-mvebu-cp110-utmi.c    | 384 ++++++++++++++++++
 11 files changed, 556 insertions(+), 20 deletions(-)
 create mode 100644 drivers/phy/marvell/phy-mvebu-cp110-utmi.c

-- 
2.17.1