[PATCH v2 1/3] gpiolib: Introduce the for_each_set_clump macro

Syed Nayyar Waris syednwaris at gmail.com
Fri Feb 12 08:20:20 EST 2021


This macro iterates for each group of bits (clump) with set bits,
within a bitmap memory region. For each iteration, "start" is set to
the bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump". Additionally, the
bitmap_get_value() and bitmap_set_value() functions are introduced to
respectively get and set a value of n-bits in a bitmap memory region.
The n-bits can have any size from 1 to BITS_PER_LONG. size less
than 1 or more than BITS_PER_LONG causes undefined behaviour.
Moreover, during setting value of n-bit in bitmap, if a situation arise
that the width of next n-bit is exceeding the word boundary, then it
will divide itself such that some portion of it is stored in that word,
while the remaining portion is stored in the next higher word. Similar
situation occurs while retrieving the value from bitmap.

Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Bartosz Gołaszewski <bgolaszewski at baylibre.com>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: William Breathitt Gray <vilhelm.gray at gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Signed-off-by: Syed Nayyar Waris <syednwaris at gmail.com>
---
 drivers/gpio/gpiolib.c | 90 ++++++++++++++++++++++++++++++++++++++++++
 drivers/gpio/gpiolib.h | 28 +++++++++++++
 2 files changed, 118 insertions(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index b02cc2abd3b6..282ae599c143 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4342,6 +4342,96 @@ static int gpiolib_seq_show(struct seq_file *s, void *v)
 	return 0;
 }
 
+/**
+ * bitmap_get_value - get a value of n-bits from the memory region
+ * @map: address to the bitmap memory region
+ * @start: bit offset of the n-bit value
+ * @nbits: size of value in bits (must be between 1 and BITS_PER_LONG inclusive).
+ *
+ * Returns value of nbits located at the @start bit offset within the @map
+ * memory region.
+ */
+unsigned long bitmap_get_value(const unsigned long *map,
+				unsigned long start,
+				unsigned long nbits)
+{
+	const size_t index = BIT_WORD(start);
+	const unsigned long offset = start % BITS_PER_LONG;
+	const unsigned long ceiling = round_up(start + 1, BITS_PER_LONG);
+	const unsigned long space = ceiling - start;
+	unsigned long value_low, value_high;
+
+	if (space >= nbits)
+		return (map[index] >> offset) & GENMASK(nbits - 1, 0);
+	else {
+		value_low = map[index] & BITMAP_FIRST_WORD_MASK(start);
+		value_high = map[index + 1] & BITMAP_LAST_WORD_MASK(start + nbits);
+		return (value_low >> offset) | (value_high << space);
+	}
+}
+EXPORT_SYMBOL_GPL(bitmap_get_value);
+
+/**
+ * bitmap_set_value - set value within a memory region
+ * @map: address to the bitmap memory region
+ * @nbits: size of map in bits
+ * @value: value of clump
+ * @value_width: size of value in bits (must be between 1 and BITS_PER_LONG inclusive)
+ * @start: bit offset of the value
+ */
+void bitmap_set_value(unsigned long *map, unsigned long nbits,
+			unsigned long value, unsigned long value_width,
+			unsigned long start)
+{
+	const unsigned long index = BIT_WORD(start);
+	const unsigned long length = BIT_WORD(nbits);
+	const unsigned long offset = start % BITS_PER_LONG;
+	const unsigned long ceiling = round_up(start + 1, BITS_PER_LONG);
+	const unsigned long space = ceiling - start;
+
+	value &= GENMASK(value_width - 1, 0);
+
+	if (space >= value_width) {
+		map[index] &= ~(GENMASK(value_width - 1, 0) << offset);
+		map[index] |= value << offset;
+	} else {
+		map[index + 0] &= ~BITMAP_FIRST_WORD_MASK(start);
+		map[index + 0] |= value << offset;
+
+		if (index + 1 >= length)
+			return;
+
+		map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + value_width);
+		map[index + 1] |= value >> space;
+	}
+}
+EXPORT_SYMBOL_GPL(bitmap_set_value);
+
+/**
+ * find_next_clump - find next clump with set bits in a memory region
+ * @clump: location to store copy of found clump
+ * @addr: address to base the search on
+ * @size: bitmap size in number of bits
+ * @offset: bit offset at which to start searching
+ * @clump_size: clump size in bits
+ *
+ * Returns the bit offset for the next set clump; the found clump value is
+ * copied to the location pointed by @clump. If no bits are set, returns @size.
+ */
+unsigned long find_next_clump(unsigned long *clump, const unsigned long *addr,
+				unsigned long size, unsigned long offset,
+				unsigned long clump_size)
+{
+	offset = find_next_bit(addr, size, offset);
+	if (offset == size)
+		return size;
+
+	offset = rounddown(offset, clump_size);
+	*clump = bitmap_get_value(addr, offset, clump_size);
+	return offset;
+}
+EXPORT_SYMBOL_GPL(find_next_clump);
+
 static const struct seq_operations gpiolib_sops = {
 	.start = gpiolib_seq_start,
 	.next = gpiolib_seq_next,
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 30bc3f80f83e..41c6b24d9842 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -141,6 +141,34 @@ int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce);
 int gpiod_hog(struct gpio_desc *desc, const char *name,
 		unsigned long lflags, enum gpiod_flags dflags);
 
+unsigned long bitmap_get_value(const unsigned long *map,
+				unsigned long start,
+				unsigned long nbits);
+
+void bitmap_set_value(unsigned long *map, unsigned long nbits,
+			unsigned long value, unsigned long value_width,
+			unsigned long start);
+
+unsigned long find_next_clump(unsigned long *clump, const unsigned long *addr,
+				unsigned long size, unsigned long offset,
+				unsigned long clump_size);
+
+#define find_first_clump(clump, bits, size, clump_size) \
+	find_next_clump((clump), (bits), (size), 0, (clump_size))
+
+/**
+ * for_each_set_clump - iterate over bitmap for each clump with set bits
+ * @start: bit offset to start search and to store the current iteration offset
+ * @clump: location to store copy of current 8-bit clump
+ * @bits: bitmap address to base the search on
+ * @size: bitmap size in number of bits
+ * @clump_size: clump size in bits
+ */
+#define for_each_set_clump(start, clump, bits, size, clump_size) \
+	for ((start) = find_first_clump(&(clump), (bits), (size), (clump_size)); \
+	     (start) < (size); \
+	     (start) = find_next_clump(&(clump), (bits), (size), (start) + (clump_size), (clump_size)))
+
 /*
  * Return the GPIO number of the passed descriptor relative to its chip
  */
-- 
2.29.0




More information about the linux-arm-kernel mailing list