[PATCH v5 13/19] remoteproc: Properly deal with the resource table
Mathieu Poirier
mathieu.poirier at linaro.org
Thu Feb 11 18:46:21 EST 2021
If it is possible to detach the remote processor, keep an untouched
copy of the resource table. That way we can start from the same
resource table without having to worry about original values or what
elements the startup code has changed when re-attaching to the remote
processor.
Reported-by: Arnaud POULIQUEN <arnaud.pouliquen at foss.st.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
---
drivers/remoteproc/remoteproc_core.c | 70 ++++++++++++++++++++++
drivers/remoteproc/remoteproc_elf_loader.c | 24 +++++++-
include/linux/remoteproc.h | 3 +
3 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 660dcc002ff6..9a77cb6d6470 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1527,7 +1527,9 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
clean_up_resources:
rproc_resource_cleanup(rproc);
kfree(rproc->cached_table);
+ kfree(rproc->clean_table);
rproc->cached_table = NULL;
+ rproc->clean_table = NULL;
rproc->table_ptr = NULL;
unprepare_rproc:
/* release HW resources if needed */
@@ -1555,6 +1557,23 @@ static int rproc_set_loaded_rsc_table(struct rproc *rproc)
return ret;
}
+ /*
+ * If it is possible to detach the remote processor, keep an untouched
+ * copy of the resource table. That way we can start fresh again when
+ * the remote processor is re-attached, that is:
+ *
+ * DETACHED -> ATTACHED -> DETACHED -> ATTACHED
+ *
+ * A clean copy of the table is also taken in rproc_elf_load_rsc_table()
+ * for cases where the remote processor is booted by the remoteproc
+ * core and later detached from.
+ */
+ if (rproc->ops->detach) {
+ rproc->clean_table = kmemdup(table_ptr, table_sz, GFP_KERNEL);
+ if (!rproc->clean_table)
+ return -ENOMEM;
+ }
+
/*
* The resource table is already loaded in device memory, no need
* to work with a cached table.
@@ -1566,6 +1585,40 @@ static int rproc_set_loaded_rsc_table(struct rproc *rproc)
return 0;
}
+static int rproc_reset_loaded_rsc_table(struct rproc *rproc)
+{
+ /*
+ * In order to detach() from a remote processor a clean resource table
+ * _must_ have been allocated at boot time, either from rproc_fw_boot()
+ * or from rproc_attach(). If one isn't present something went really
+ * wrong and we must complain.
+ */
+ if (WARN_ON(!rproc->clean_table))
+ return -EINVAL;
+
+ /*
+ * Install the clean resource table where the firmware, i.e
+ * rproc_get_loaded_rsc_table(), expects it.
+ */
+ memcpy(rproc->table_ptr, rproc->clean_table, rproc->table_sz);
+
+ /*
+ * If the remote processors was started by the core then a cached_table
+ * is present and we must follow the same cleanup sequence as we would
+ * for a shutdown(). As it is in rproc_stop(), use the cached resource
+ * table for the rest of the detach process since ->table_ptr will
+ * become invalid as soon as carveouts are released in
+ * rproc_resource_cleanup().
+ *
+ * If the remote processor was started by an external entity the
+ * cached_table is NULL and the rest of the cleanup code in
+ * rproc_free_vring() can deal with that.
+ */
+ rproc->table_ptr = rproc->cached_table;
+
+ return 0;
+}
+
/*
* Attach to remote processor - similar to rproc_fw_boot() but without
* the steps that deal with the firmware image.
@@ -1947,7 +2000,10 @@ void rproc_shutdown(struct rproc *rproc)
/* Free the copy of the resource table */
kfree(rproc->cached_table);
+ /* Free the clean resource table */
+ kfree(rproc->clean_table);
rproc->cached_table = NULL;
+ rproc->clean_table = NULL;
rproc->table_ptr = NULL;
out:
mutex_unlock(&rproc->lock);
@@ -2000,6 +2056,16 @@ int rproc_detach(struct rproc *rproc)
goto out;
}
+ /*
+ * Install a clean resource table for re-attach while
+ * rproc->table_ptr is still valid.
+ */
+ ret = rproc_reset_loaded_rsc_table(rproc);
+ if (ret) {
+ atomic_inc(&rproc->power);
+ goto out;
+ }
+
/* clean up all acquired resources */
rproc_resource_cleanup(rproc);
@@ -2008,10 +2074,14 @@ int rproc_detach(struct rproc *rproc)
rproc_disable_iommu(rproc);
+ /* Free the copy of the resource table */
+ kfree(rproc->cached_table);
/* Follow the same sequence as in rproc_shutdown() */
kfree(rproc->cached_table);
rproc->cached_table = NULL;
+ rproc->clean_table = NULL;
rproc->table_ptr = NULL;
+
out:
mutex_unlock(&rproc->lock);
return ret;
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index df68d87752e4..aa09782c932d 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -17,10 +17,11 @@
#define pr_fmt(fmt) "%s: " fmt, __func__
-#include <linux/module.h>
+#include <linux/elf.h>
#include <linux/firmware.h>
+#include <linux/module.h>
#include <linux/remoteproc.h>
-#include <linux/elf.h>
+#include <linux/slab.h>
#include "remoteproc_internal.h"
#include "remoteproc_elf_helpers.h"
@@ -338,6 +339,25 @@ int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw)
if (!rproc->cached_table)
return -ENOMEM;
+ /*
+ * If it is possible to detach the remote processor, keep an untouched
+ * copy of the resource table. That way we can start fresh again when
+ * the remote processor is re-attached, that is:
+ *
+ * OFFLINE -> RUNNING -> DETACHED -> ATTACHED
+ *
+ * A clean copy of the table is also taken in
+ * rproc_set_loaded_rsc_table() for cases where the remote processor is
+ * booted by an external entity and later detached from.
+ */
+ if (rproc->ops->detach) {
+ rproc->clean_table = kmemdup(table, tablesz, GFP_KERNEL);
+ if (!rproc->clean_table) {
+ kfree(rproc->cached_table);
+ return -ENOMEM;
+ }
+ }
+
rproc->table_ptr = rproc->cached_table;
rproc->table_sz = tablesz;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index e1c843c19cc6..e5f52a12a650 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -514,6 +514,8 @@ struct rproc_dump_segment {
* @recovery_disabled: flag that state if recovery was disabled
* @max_notifyid: largest allocated notify id.
* @table_ptr: pointer to the resource table in effect
+ * @clean_table: copy of the resource table without modifications. Used
+ * when a remote processor is attached or detached from the core
* @cached_table: copy of the resource table
* @table_sz: size of @cached_table
* @has_iommu: flag to indicate if remote processor is behind an MMU
@@ -550,6 +552,7 @@ struct rproc {
bool recovery_disabled;
int max_notifyid;
struct resource_table *table_ptr;
+ struct resource_table *clean_table;
struct resource_table *cached_table;
size_t table_sz;
bool has_iommu;
--
2.25.1
More information about the linux-arm-kernel
mailing list