[PATCH v5 07/19] remoteproc: Add new get_loaded_rsc_table() to rproc_ops
Mathieu Poirier
mathieu.poirier at linaro.org
Thu Feb 11 18:46:15 EST 2021
Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it. When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.
Signed-off-by: Mathieu Poirier <mathieu.poirier at linaro.org>
---
New for V5:
- Added function rproc_set_loaded_rsc_table() to keep rproc_attach() clean.
- Setting ->cached_table, ->table_ptr and ->table_sz in the remoteproc core
rather than the platform drivers.
---
drivers/remoteproc/remoteproc_core.c | 35 ++++++++++++++++++++++++
drivers/remoteproc/remoteproc_internal.h | 10 +++++++
include/linux/remoteproc.h | 6 +++-
3 files changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index e6606d10a4c8..741bc20de437 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1537,6 +1537,35 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
return ret;
}
+static int rproc_set_loaded_rsc_table(struct rproc *rproc)
+{
+ struct resource_table *table_ptr;
+ struct device *dev = &rproc->dev;
+ size_t table_sz;
+ int ret;
+
+ table_ptr = rproc_get_loaded_rsc_table(rproc, &table_sz);
+ if (IS_ERR_OR_NULL(table_ptr)) {
+ if (!table_ptr)
+ ret = -EINVAL;
+ else
+ ret = PTR_ERR(table_ptr);
+
+ dev_err(dev, "can't load resource table: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * The resource table is already loaded in device memory, no need
+ * to work with a cached table.
+ */
+ rproc->cached_table = NULL;
+ rproc->table_ptr = table_ptr;
+ rproc->table_sz = table_sz;
+
+ return 0;
+}
+
/*
* Attach to remote processor - similar to rproc_fw_boot() but without
* the steps that deal with the firmware image.
@@ -1556,6 +1585,12 @@ static int rproc_attach(struct rproc *rproc)
return ret;
}
+ ret = rproc_set_loaded_rsc_table(rproc);
+ if (ret) {
+ dev_err(dev, "can't load resource table: %d\n", ret);
+ goto disable_iommu;
+ }
+
/* reset max_notifyid */
rproc->max_notifyid = -1;
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index c34002888d2c..4f73aac7e60d 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -177,6 +177,16 @@ struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
return NULL;
}
+static inline
+struct resource_table *rproc_get_loaded_rsc_table(struct rproc *rproc,
+ size_t *size)
+{
+ if (rproc->ops->get_loaded_rsc_table)
+ return rproc->ops->get_loaded_rsc_table(rproc, size);
+
+ return NULL;
+}
+
static inline
bool rproc_u64_fit_in_size_t(u64 val)
{
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 6b0a0ed30a03..51538a7d120d 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -368,7 +368,9 @@ enum rsc_handling_status {
* RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a
* negative value on error
* @load_rsc_table: load resource table from firmware image
- * @find_loaded_rsc_table: find the loaded resouce table
+ * @find_loaded_rsc_table: find the loaded resource table from firmware image
+ * @get_loaded_rsc_table: get resource table installed in memory
+ * by external entity
* @load: load firmware to memory, where the remote processor
* expects to find it
* @sanity_check: sanity check the fw image
@@ -390,6 +392,8 @@ struct rproc_ops {
int offset, int avail);
struct resource_table *(*find_loaded_rsc_table)(
struct rproc *rproc, const struct firmware *fw);
+ struct resource_table *(*get_loaded_rsc_table)(
+ struct rproc *rproc, size_t *size);
int (*load)(struct rproc *rproc, const struct firmware *fw);
int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
--
2.25.1
More information about the linux-arm-kernel
mailing list