[PATCH v2 05/12] arm64: dts: marvell: armada-3720-db: add comphy references

[Pali Rohár]

On Wednesday 10 February 2021 16:09:42 kostap at marvell.com wrote:
> From: Grzegorz Jaszczyk <jaz at semihalf.com>
> 
> Adding phy description to pcie, sata and usb will allow appropriate drivers
> to configure marvell comphy-a3700 accordingly.
> 
> Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>

Hello! This patch is not needed too as Gregory already included into his
tree alternative patch which defines SATA PHY globally into main include
file armada-37xx.dtsi:

https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu.git/commit/?h=for-next&id=6ece0f7dbd558670ec72ba390379949a4d4dc5c0

And PCIe and USB 3.0 PHY definitions are already in include file.

> ---
>  arch/arm64/boot/dts/marvell/armada-3720-db.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> index 3e5789f37206..15e923f945d4 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> @@ -132,11 +132,15 @@
>  	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
>  	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
>  	status = "okay";
> +	/* Generic PHY, providing serdes lanes */
> +	phys = <&comphy1 0>;
>  };
>  
>  /* CON3 */
>  &sata {
>  	status = "okay";
> +	/* Generic PHY, providing serdes lanes */
> +	phys = <&comphy2 0>;
>  };
>  
>  &sdhci0 {
> @@ -217,4 +221,7 @@
>  &usb3 {
>  	status = "okay";
>  	usb-phy = <&usb3_phy>;
> +	/* Generic PHY, providing serdes lanes */
> +	phys = <&comphy0 0>;
> +	phy-names = "usb";
>  };
> -- 
> 2.17.1
>