[PATCH v2 3/3] ARM: cache-v7: get rid of mini-stack
Ard Biesheuvel
ardb at kernel.org
Wed Feb 10 13:55:32 EST 2021
Now that we have reduced the number of registers that we need to
preserve when calling v7_invalidate_l1 from the boot code, we can use
scratch registers to preserve the remaining ones, and get rid of the
mini stack entirely. This works around any issues regarding cache
behavior in relation to the uncached accesses to this memory, which is
hard to get right in the general case (i.e., both bare metal and under
virtualization)
While at it, switch v7_invalidate_l1 to using ip as a scratch register
instead of r4. This makes the function AAPCS compliant, and removes the
need to stash r4 in ip across the call.
Acked-by: Nicolas Pitre <nico at fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb at kernel.org>
---
arch/arm/include/asm/memory.h | 15 --------
arch/arm/mm/cache-v7.S | 10 ++---
arch/arm/mm/proc-v7.S | 39 +++++++++-----------
3 files changed, 23 insertions(+), 41 deletions(-)
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 2f841cb65c30..a711322d9f40 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -150,21 +150,6 @@ extern unsigned long vectors_base;
*/
#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
-#ifdef CONFIG_XIP_KERNEL
-/*
- * When referencing data in RAM from the XIP region in a relative manner
- * with the MMU off, we need the relative offset between the two physical
- * addresses. The macro below achieves this, which is:
- * __pa(v_data) - __xip_pa(v_text)
- */
-#define PHYS_RELATIVE(v_data, v_text) \
- (((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \
- ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \
- CONFIG_XIP_PHYS_ADDR))
-#else
-#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text))
-#endif
-
#ifndef __ASSEMBLY__
/*
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 76201ee9ee59..830bbfb26ca5 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -53,12 +53,12 @@ ENTRY(v7_invalidate_l1)
and r2, r0, #0x7
add r2, r2, #4 @ SetShift
-1: movw r4, #0x7fff
- and r0, r4, r0, lsr #13 @ 'NumSets' in CCSIDR[27:13]
+1: movw ip, #0x7fff
+ and r0, ip, r0, lsr #13 @ 'NumSets' in CCSIDR[27:13]
-2: mov r4, r0, lsl r2 @ NumSet << SetShift
- orr r4, r4, r3 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
- mcr p15, 0, r4, c7, c6, 2
+2: mov ip, r0, lsl r2 @ NumSet << SetShift
+ orr ip, ip, r3 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, ip, c7, c6, 2
subs r0, r0, #1 @ Set--
bpl 2b
subs r3, r3, r1 @ Way--
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 28c9d32fa99a..26d726a08a34 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -256,6 +256,20 @@ ENDPROC(cpu_pj4b_do_resume)
#endif
+ @
+ @ Invoke the v7_invalidate_l1() function, which adheres to the AAPCS
+ @ rules, and so it may corrupt registers that we need to preserve.
+ @
+ .macro do_invalidate_l1
+ mov r6, r1
+ mov r7, r2
+ mov r10, lr
+ bl v7_invalidate_l1 @ corrupts {r0-r3, ip, lr}
+ mov r1, r6
+ mov r2, r7
+ mov lr, r10
+ .endm
+
/*
* __v7_setup
*
@@ -277,6 +291,7 @@ __v7_ca5mp_setup:
__v7_ca9mp_setup:
__v7_cr7mp_setup:
__v7_cr8mp_setup:
+ do_invalidate_l1
mov r10, #(1 << 0) @ Cache/TLB ops broadcasting
b 1f
__v7_ca7mp_setup:
@@ -284,13 +299,9 @@ __v7_ca12mp_setup:
__v7_ca15mp_setup:
__v7_b15mp_setup:
__v7_ca17mp_setup:
+ do_invalidate_l1
mov r10, #0
-1: adr r0, __v7_setup_stack_ptr
- ldr r12, [r0]
- add r12, r12, r0 @ the local stack
- stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
- bl v7_invalidate_l1
- ldmia r12, {r1-r6, lr}
+1:
#ifdef CONFIG_SMP
orr r10, r10, #(1 << 6) @ Enable SMP/nAMP mode
ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
@@ -471,12 +482,7 @@ __v7_pj4b_setup:
#endif /* CONFIG_CPU_PJ4B */
__v7_setup:
- adr r0, __v7_setup_stack_ptr
- ldr r12, [r0]
- add r12, r12, r0 @ the local stack
- stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
- bl v7_invalidate_l1
- ldmia r12, {r1-r6, lr}
+ do_invalidate_l1
__v7_setup_cont:
and r0, r9, #0xff000000 @ ARM?
@@ -548,17 +554,8 @@ __errata_finish:
orr r0, r0, r6 @ set them
THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
ret lr @ return to head.S:__ret
-
- .align 2
-__v7_setup_stack_ptr:
- .word PHYS_RELATIVE(__v7_setup_stack, .)
ENDPROC(__v7_setup)
- .bss
- .align 2
-__v7_setup_stack:
- .space 4 * 7 @ 7 registers
-
__INITDATA
.weak cpu_v7_bugs_init
--
2.30.0
More information about the linux-arm-kernel
mailing list