[PATCH] soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7

[Tony Lindgren]

Yongqin Liu <yongqin.liu at linaro.org> reported an issue where reboot hangs
on beagleboard-x15. This started happening after commit 7078a5ba7a58
("soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1").

We now assert any 012 type resets on init to prevent unconfigured
accelerator MMUs getting enabled on init depending on the bootloader or
kexec configured state.

Turns out that we now also wrongly assert dra7 l3init domain PCIe reset
bits causing a hang during reboot. Let's fix the l3init reset bits to
use a 01 map instead of 012 map. There are only two rstctrl bits and not
three. This is documented in TRM "Table 3-1647. RM_PCIESS_RSTCTRL".

Fixes: 5a68c87afde0 ("soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances")
Fixes: 7078a5ba7a58 ("soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1")
Cc: Kishon Vijay Abraham I <kishon at ti.com>
Reported-by: Yongqin Liu <yongqin.liu at linaro.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 drivers/soc/ti/omap_prm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -332,7 +332,7 @@ static const struct omap_prm_data dra7_prm_data[] = {
 	{
 		.name = "l3init", .base = 0x4ae07300,
 		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_alwon,
-		.rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012,
+		.rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01,
 		.clkdm_name = "pcie"
 	},
 	{
-- 
2.30.1