[PATCH V3 11/14] coresight: sink: Add TRBE driver
Anshuman Khandual
anshuman.khandual at arm.com
Tue Feb 9 23:12:29 EST 2021
On 2/9/21 11:09 PM, Mathieu Poirier wrote:
> On Fri, Feb 05, 2021 at 10:53:30AM -0700, Mathieu Poirier wrote:
>> On Wed, Jan 27, 2021 at 02:25:35PM +0530, Anshuman Khandual wrote:
>>> Trace Buffer Extension (TRBE) implements a trace buffer per CPU which is
>>> accessible via the system registers. The TRBE supports different addressing
>>> modes including CPU virtual address and buffer modes including the circular
>>> buffer mode. The TRBE buffer is addressed by a base pointer (TRBBASER_EL1),
>>> an write pointer (TRBPTR_EL1) and a limit pointer (TRBLIMITR_EL1). But the
>>> access to the trace buffer could be prohibited by a higher exception level
>>> (EL3 or EL2), indicated by TRBIDR_EL1.P. The TRBE can also generate a CPU
>>> private interrupt (PPI) on address translation errors and when the buffer
>>> is full. Overall implementation here is inspired from the Arm SPE driver.
>>>
>>
>> I got this message when applying the patch:
>>
>> Applying: coresight: sink: Add TRBE driver
>> .git/rebase-apply/patch:76: new blank line at EOF.
>> +
>> warning: 1 line adds whitespace errors.
>>
>>> Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
>>> Cc: Mike Leach <mike.leach at linaro.org>
>>> Cc: Suzuki K Poulose <suzuki.poulose at arm.com>
>>> Signed-off-by: Anshuman Khandual <anshuman.khandual at arm.com>
>>> ---
>>> Changes in V3:
>>>
>>> - Added new DT bindings document TRBE.yaml
>>> - Changed TRBLIMITR_TRIG_MODE_SHIFT from 2 to 3
>>> - Dropped isb() from trbe_reset_local()
>>> - Dropped gap between (void *) and buf->trbe_base
>>> - Changed 'int' to 'unsigned int' in is_trbe_available()
>>> - Dropped unused function set_trbe_running(), set_trbe_virtual_mode(),
>>> set_trbe_enabled() and set_trbe_limit_pointer()
>>> - Changed get_trbe_flag_update(), is_trbe_programmable() and
>>> get_trbe_address_align() to accept TRBIDR value
>>> - Changed is_trbe_running(), is_trbe_abort(), is_trbe_wrap(), is_trbe_trg(),
>>> is_trbe_irq(), get_trbe_bsc() and get_trbe_ec() to accept TRBSR value
>>> - Dropped snapshot mode condition in arm_trbe_alloc_buffer()
>>> - Exit arm_trbe_init() when arm64_kernel_unmapped_at_el0() is enabled
>>> - Compute trbe_limit before trbe_write to get the updated handle
>>> - Added trbe_stop_and_truncate_event()
>>> - Dropped trbe_handle_fatal()
>>>
>>> Documentation/trace/coresight/coresight-trbe.rst | 39 +
>>> arch/arm64/include/asm/sysreg.h | 1 +
>>> drivers/hwtracing/coresight/Kconfig | 11 +
>>> drivers/hwtracing/coresight/Makefile | 1 +
>>> drivers/hwtracing/coresight/coresight-trbe.c | 1023 ++++++++++++++++++++++
>>> drivers/hwtracing/coresight/coresight-trbe.h | 160 ++++
>>> 6 files changed, 1235 insertions(+)
>>> create mode 100644 Documentation/trace/coresight/coresight-trbe.rst
>>> create mode 100644 drivers/hwtracing/coresight/coresight-trbe.c
>>> create mode 100644 drivers/hwtracing/coresight/coresight-trbe.h
>>>
>>> diff --git a/Documentation/trace/coresight/coresight-trbe.rst b/Documentation/trace/coresight/coresight-trbe.rst
>>> new file mode 100644
>>> index 0000000..1cbb819
>>> --- /dev/null
>>> +++ b/Documentation/trace/coresight/coresight-trbe.rst
>>> @@ -0,0 +1,39 @@
>>> +.. SPDX-License-Identifier: GPL-2.0
>>> +
>>> +==============================
>>> +Trace Buffer Extension (TRBE).
>>> +==============================
>>> +
>>> + :Author: Anshuman Khandual <anshuman.khandual at arm.com>
>>> + :Date: November 2020
>>> +
>>> +Hardware Description
>>> +--------------------
>>> +
>>> +Trace Buffer Extension (TRBE) is a percpu hardware which captures in system
>>> +memory, CPU traces generated from a corresponding percpu tracing unit. This
>>> +gets plugged in as a coresight sink device because the corresponding trace
>>> +genarators (ETE), are plugged in as source device.
>>> +
>>> +The TRBE is not compliant to CoreSight architecture specifications, but is
>>> +driven via the CoreSight driver framework to support the ETE (which is
>>> +CoreSight compliant) integration.
>>> +
>>> +Sysfs files and directories
>>> +---------------------------
>>> +
>>> +The TRBE devices appear on the existing coresight bus alongside the other
>>> +coresight devices::
>>> +
>>> + >$ ls /sys/bus/coresight/devices
>>> + trbe0 trbe1 trbe2 trbe3
>>> +
>>> +The ``trbe<N>`` named TRBEs are associated with a CPU.::
>>> +
>>> + >$ ls /sys/bus/coresight/devices/trbe0/
>>> + align dbm
>>> +
>>> +*Key file items are:-*
>>> + * ``align``: TRBE write pointer alignment
>>> + * ``dbm``: TRBE updates memory with access and dirty flags
>>> +
>>
>> Please add documentation for these, the same way it was done for all the other CS
>> components [1].
>>
>> [1]. https://elixir.bootlin.com/linux/latest/source/Documentation/ABI/testing
>> (sysfs-bus-coresight-device-xyz)
>>
>>> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
>>> index 85ae4db..9e2e9b7 100644
>>> --- a/arch/arm64/include/asm/sysreg.h
>>> +++ b/arch/arm64/include/asm/sysreg.h
>>> @@ -97,6 +97,7 @@
>>> #define SET_PSTATE_UAO(x) __emit_inst(0xd500401f | PSTATE_UAO | ((!!x) << PSTATE_Imm_shift))
>>> #define SET_PSTATE_SSBS(x) __emit_inst(0xd500401f | PSTATE_SSBS | ((!!x) << PSTATE_Imm_shift))
>>> #define SET_PSTATE_TCO(x) __emit_inst(0xd500401f | PSTATE_TCO | ((!!x) << PSTATE_Imm_shift))
>>> +#define TSB_CSYNC __emit_inst(0xd503225f)
>>>
>>> #define set_pstate_pan(x) asm volatile(SET_PSTATE_PAN(x))
>>> #define set_pstate_uao(x) asm volatile(SET_PSTATE_UAO(x))
>>> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
>>> index f154ae7..aa657ab 100644
>>> --- a/drivers/hwtracing/coresight/Kconfig
>>> +++ b/drivers/hwtracing/coresight/Kconfig
>>> @@ -164,6 +164,17 @@ config CORESIGHT_CTI
>>> To compile this driver as a module, choose M here: the
>>> module will be called coresight-cti.
>>>
>>> +config CORESIGHT_TRBE
>>> + bool "Trace Buffer Extension (TRBE) driver"
>>
>> Shouldn't that be "tristate"?
>>
>>> + depends on ARM64
>>
>> I would make it dependent on ETMv4 as well since it can only be used by that
>> component.
>>
>>> + help
>>> + This driver provides support for percpu Trace Buffer Extension (TRBE).
>>> + TRBE always needs to be used along with it's corresponding percpu ETE
>>> + component. ETE generates trace data which is then captured with TRBE.
>>> + Unlike traditional sink devices, TRBE is a CPU feature accessible via
>>> + system registers. But it's explicit dependency with trace unit (ETE)
>>> + requires it to be plugged in as a coresight sink device.
>>
>> Please add:
>>
>> "To compile this driver as a module, choose M here: the
>> module will be called coresight-trbe."
>>
>> I'm out of time for today, I will continue on Monday.
>>
>> Mathieu
>>
>>> +
>>> config CORESIGHT_CTI_INTEGRATION_REGS
>>> bool "Access CTI CoreSight Integration Registers"
>>> depends on CORESIGHT_CTI
>>> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
>>> index f20e357..d608165 100644
>>> --- a/drivers/hwtracing/coresight/Makefile
>>> +++ b/drivers/hwtracing/coresight/Makefile
>>> @@ -21,5 +21,6 @@ obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o
>>> obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o
>>> obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o
>>> obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
>>> +obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
>>> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
>>> coresight-cti-sysfs.o
>>> diff --git a/drivers/hwtracing/coresight/coresight-trbe.c b/drivers/hwtracing/coresight/coresight-trbe.c
>>> new file mode 100644
>>> index 0000000..1464d8b
>>> --- /dev/null
>>> +++ b/drivers/hwtracing/coresight/coresight-trbe.c
>>> @@ -0,0 +1,1023 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * This driver enables Trace Buffer Extension (TRBE) as a per-cpu coresight
>>> + * sink device could then pair with an appropriate per-cpu coresight source
>>> + * device (ETE) thus generating required trace data. Trace can be enabled
>>> + * via the perf framework.
>>> + *
>>> + * Copyright (C) 2020 ARM Ltd.
>>> + *
>>> + * Author: Anshuman Khandual <anshuman.khandual at arm.com>
>>> + */
>>> +#define DRVNAME "arm_trbe"
>>> +
>>> +#define pr_fmt(fmt) DRVNAME ": " fmt
>>> +
>>> +#include "coresight-trbe.h"
>>> +
>>> +#define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT))
>>> +
>>> +/*
>>> + * A padding packet that will help the user space tools
>>> + * in skipping relevant sections in the captured trace
>>> + * data which could not be decoded. TRBE doesn't support
>>> + * formatting the trace data, unlike the legacy CoreSight
>>> + * sinks and thus we use ETE trace packets to pad the
>>> + * sections of the buffer.
>>> + */
>>> +#define ETE_IGNORE_PACKET 0x70
>>> +
>>> +/*
>>> + * Minimum amount of meaningful trace will contain:
>>> + * A-Sync, Trace Info, Trace On, Address, Atom.
>>> + * This is about 44bytes of ETE trace. To be on
>>> + * the safer side, we assume 64bytes is the minimum
>>> + * space required for a meaningful session, before
>>> + * we hit a "WRAP" event.
>>> + */
>>> +#define TRBE_TRACE_MIN_BUF_SIZE 64
>>> +
>>> +enum trbe_fault_action {
>>> + TRBE_FAULT_ACT_WRAP,
>>> + TRBE_FAULT_ACT_SPURIOUS,
>>> + TRBE_FAULT_ACT_FATAL,
>>> +};
>>> +
>>> +struct trbe_buf {
>>> + unsigned long trbe_base;
>>> + unsigned long trbe_limit;
>>> + unsigned long trbe_write;
>>> + int nr_pages;
>>> + void **pages;
>>> + bool snapshot;
>>> + struct trbe_cpudata *cpudata;
>>> +};
>>> +
>>> +struct trbe_cpudata {
>>> + bool trbe_dbm;
>>> + u64 trbe_align;
>>> + int cpu;
>>> + enum cs_mode mode;
>>> + struct trbe_buf *buf;
>>> + struct trbe_drvdata *drvdata;
>>> +};
>>> +
>>> +struct trbe_drvdata {
>>> + struct trbe_cpudata __percpu *cpudata;
>>> + struct perf_output_handle __percpu **handle;
>>> + struct hlist_node hotplug_node;
>>> + int irq;
>>> + cpumask_t supported_cpus;
>>> + enum cpuhp_state trbe_online;
>>> + struct platform_device *pdev;
>>> +};
>>> +
>>> +static int trbe_alloc_node(struct perf_event *event)
>>> +{
>>> + if (event->cpu == -1)
>>> + return NUMA_NO_NODE;
>>> + return cpu_to_node(event->cpu);
>>> +}
>>> +
>>> +static void trbe_drain_buffer(void)
>>> +{
>>> + asm(TSB_CSYNC);
>>> + dsb(nsh);
>>> +}
>>> +
>>> +static void trbe_drain_and_disable_local(void)
>>> +{
>>> + trbe_drain_buffer();
>>> + write_sysreg_s(0, SYS_TRBLIMITR_EL1);
>>> + isb();
>>> +}
>>> +
>>> +static void trbe_reset_local(void)
>>> +{
>>> + trbe_drain_and_disable_local();
>>> + write_sysreg_s(0, SYS_TRBPTR_EL1);
>>> + write_sysreg_s(0, SYS_TRBBASER_EL1);
>>> + write_sysreg_s(0, SYS_TRBSR_EL1);
>>> +}
>>> +
>>> +static void trbe_stop_and_truncate_event(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> +
>>> + /*
>>> + * We cannot proceed with the buffer collection and we
>>> + * do not have any data for the current session. The
>>> + * etm_perf driver expects to close out the aux_buffer
>>> + * at event_stop(). So disable the TRBE here and leave
>>> + * the update_buffer() to return a 0 size.
>>> + */
>>> + trbe_drain_and_disable_local();
>>> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
>>> + *this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL;
>>> +}
>>> +
>>> +/*
>>> + * TRBE Buffer Management
>>> + *
>>> + * The TRBE buffer spans from the base pointer till the limit pointer. When enabled,
>>> + * it starts writing trace data from the write pointer onward till the limit pointer.
>>> + * When the write pointer reaches the address just before the limit pointer, it gets
>>> + * wrapped around again to the base pointer. This is called a TRBE wrap event, which
>>> + * generates a maintenance interrupt when operated in WRAP or FILL mode. This driver
>>> + * uses FILL mode, where the TRBE stops the trace collection at wrap event. The IRQ
>>> + * handler updates the AUX buffer and re-enables the TRBE with updated WRITE and
>>> + * LIMIT pointers.
>>> + *
>>> + * Wrap around with an IRQ
>>> + * ------ < ------ < ------- < ----- < -----
>>> + * | |
>>> + * ------ > ------ > ------- > ----- > -----
>>> + *
>>> + * +---------------+-----------------------+
>>> + * | | |
>>> + * +---------------+-----------------------+
>>> + * Base Pointer Write Pointer Limit Pointer
>>> + *
>>> + * The base and limit pointers always needs to be PAGE_SIZE aligned. But the write
>>> + * pointer can be aligned to the implementation defined TRBE trace buffer alignment
>>> + * as captured in trbe_cpudata->trbe_align.
>>> + *
>>> + *
>>> + * head tail wakeup
>>> + * +---------------------------------------+----- ~ ~ ------
>>> + * |$$$$$$$|################|$$$$$$$$$$$$$$| |
>>> + * +---------------------------------------+----- ~ ~ ------
>>> + * Base Pointer Write Pointer Limit Pointer
>>> + *
>>> + * The perf_output_handle indices (head, tail, wakeup) are monotonically increasing
>>> + * values which tracks all the driver writes and user reads from the perf auxiliary
>>> + * buffer. Generally [head..tail] is the area where the driver can write into unless
>>> + * the wakeup is behind the tail. Enabled TRBE buffer span needs to be adjusted and
>>> + * configured depending on the perf_output_handle indices, so that the driver does
>>> + * not override into areas in the perf auxiliary buffer which is being or yet to be
>>> + * consumed from the user space. The enabled TRBE buffer area is a moving subset of
>>> + * the allocated perf auxiliary buffer.
>>> + */
>>> +static void trbe_pad_buf(struct perf_output_handle *handle, int len)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> + u64 head = PERF_IDX2OFF(handle->head, buf);
>>> +
>>> + memset((void *)buf->trbe_base + head, ETE_IGNORE_PACKET, len);
>>> + if (!buf->snapshot)
>>> + perf_aux_output_skip(handle, len);
>>> +}
>>> +
>>> +static unsigned long trbe_snapshot_offset(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> +
>>> + /*
>>> + * The ETE trace has alignment synchronization packets allowing
>>> + * the decoder to reset in case of an overflow or corruption.
>>> + * So we can use the entire buffer for the snapshot mode.
>>> + */
>>> + return buf->nr_pages * PAGE_SIZE;
>>> +}
>>> +
>>> +/*
>>> + * TRBE Limit Calculation
>>> + *
>>> + * The following markers are used to illustrate various TRBE buffer situations.
>>> + *
>>> + * $$$$ - Data area, unconsumed captured trace data, not to be overridden
>>> + * #### - Free area, enabled, trace will be written
>>> + * %%%% - Free area, disabled, trace will not be written
>>> + * ==== - Free area, padded with ETE_IGNORE_PACKET, trace will be skipped
>>> + */
>>> +static unsigned long __trbe_normal_offset(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> + struct trbe_cpudata *cpudata = buf->cpudata;
>>> + const u64 bufsize = buf->nr_pages * PAGE_SIZE;
>>> + u64 limit = bufsize;
>>> + u64 head, tail, wakeup;
>>> +
>>> + head = PERF_IDX2OFF(handle->head, buf);
>>> +
>>> + /*
>>> + * head
>>> + * ------->|
>>> + * |
>>> + * head TRBE align tail
>>> + * +----|-------|---------------|-------+
>>> + * |$$$$|=======|###############|$$$$$$$|
>>> + * +----|-------|---------------|-------+
>>> + * trbe_base trbe_base + nr_pages
>>> + *
>>> + * Perf aux buffer output head position can be misaligned depending on
>>> + * various factors including user space reads. In case misaligned, head
>>> + * needs to be aligned before TRBE can be configured. Pad the alignment
>>> + * gap with ETE_IGNORE_PACKET bytes that will be ignored by user tools
>>> + * and skip this section thus advancing the head.
>>> + */
>>> + if (!IS_ALIGNED(head, cpudata->trbe_align)) {
>>> + unsigned long delta = roundup(head, cpudata->trbe_align) - head;
>>> +
>>> + delta = min(delta, handle->size);
>>> + trbe_pad_buf(handle, delta);
>>> + head = PERF_IDX2OFF(handle->head, buf);
>>> + }
>>> +
>>> + /*
>>> + * head = tail (size = 0)
>>> + * +----|-------------------------------+
>>> + * |$$$$|$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ |
>>> + * +----|-------------------------------+
>>> + * trbe_base trbe_base + nr_pages
>>> + *
>>> + * Perf aux buffer does not have any space for the driver to write into.
>>> + * Just communicate trace truncation event to the user space by marking
>>> + * it with PERF_AUX_FLAG_TRUNCATED.
>>> + */
>>> + if (!handle->size) {
>>> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
>>> + return 0;
>>> + }
>>> +
>>> + /* Compute the tail and wakeup indices now that we've aligned head */
>>> + tail = PERF_IDX2OFF(handle->head + handle->size, buf);
>>> + wakeup = PERF_IDX2OFF(handle->wakeup, buf);
>>> +
>>> + /*
>>> + * Lets calculate the buffer area which TRBE could write into. There
>>> + * are three possible scenarios here. Limit needs to be aligned with
>>> + * PAGE_SIZE per the TRBE requirement. Always avoid clobbering the
>>> + * unconsumed data.
>>> + *
>>> + * 1) head < tail
>>> + *
>>> + * head tail
>>> + * +----|-----------------------|-------+
>>> + * |$$$$|#######################|$$$$$$$|
>>> + * +----|-----------------------|-------+
>>> + * trbe_base limit trbe_base + nr_pages
>>> + *
>>> + * TRBE could write into [head..tail] area. Unless the tail is right at
>>> + * the end of the buffer, neither an wrap around nor an IRQ is expected
>>> + * while being enabled.
>>> + *
>>> + * 2) head == tail
>>> + *
>>> + * head = tail (size > 0)
>>> + * +----|-------------------------------+
>>> + * |%%%%|###############################|
>>> + * +----|-------------------------------+
>>> + * trbe_base limit = trbe_base + nr_pages
>>> + *
>>> + * TRBE should just write into [head..base + nr_pages] area even though
>>> + * the entire buffer is empty. Reason being, when the trace reaches the
>>> + * end of the buffer, it will just wrap around with an IRQ giving an
>>> + * opportunity to reconfigure the buffer.
>>> + *
>>> + * 3) tail < head
>>> + *
>>> + * tail head
>>> + * +----|-----------------------|-------+
>>> + * |%%%%|$$$$$$$$$$$$$$$$$$$$$$$|#######|
>>> + * +----|-----------------------|-------+
>>> + * trbe_base limit = trbe_base + nr_pages
>>> + *
>>> + * TRBE should just write into [head..base + nr_pages] area even though
>>> + * the [trbe_base..tail] is also empty. Reason being, when the trace
>>> + * reaches the end of the buffer, it will just wrap around with an IRQ
>>> + * giving an opportunity to reconfigure the buffer.
>>> + */
>>> + if (head < tail)
>>> + limit = round_down(tail, PAGE_SIZE);
>>> +
>>> + /*
>>> + * Wakeup may be arbitrarily far into the future. If it's not in the
>>> + * current generation, either we'll wrap before hitting it, or it's
>>> + * in the past and has been handled already.
>>> + *
>>> + * If there's a wakeup before we wrap, arrange to be woken up by the
>>> + * page boundary following it. Keep the tail boundary if that's lower.
>>> + *
>>> + * head wakeup tail
>>> + * +----|---------------|-------|-------+
>>> + * |$$$$|###############|%%%%%%%|$$$$$$$|
>>> + * +----|---------------|-------|-------+
>>> + * trbe_base limit trbe_base + nr_pages
>>> + */
>>> + if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
>>> + limit = min(limit, round_up(wakeup, PAGE_SIZE));
>>> +
>>> + /*
>>> + * There are two situation when this can happen i.e limit is before
>>> + * the head and hence TRBE cannot be configured.
>>> + *
>>> + * 1) head < tail (aligned down with PAGE_SIZE) and also they are both
>>> + * within the same PAGE size range.
>>> + *
>>> + * PAGE_SIZE
>>> + * |----------------------|
>>> + *
>>> + * limit head tail
>>> + * +------------|------|--------|-------+
>>> + * |$$$$$$$$$$$$$$$$$$$|========|$$$$$$$|
>>> + * +------------|------|--------|-------+
>>> + * trbe_base trbe_base + nr_pages
>>> + *
>>> + * 2) head < wakeup (aligned up with PAGE_SIZE) < tail and also both
>>> + * head and wakeup are within same PAGE size range.
>>> + *
>>> + * PAGE_SIZE
>>> + * |----------------------|
>>> + *
>>> + * limit head wakeup tail
>>> + * +----|------|-------|--------|-------+
>>> + * |$$$$$$$$$$$|=======|========|$$$$$$$|
>>> + * +----|------|-------|--------|-------+
>>> + * trbe_base trbe_base + nr_pages
>>> + */
>>> + if (limit > head)
>>> + return limit;
>>> +
>>> + trbe_pad_buf(handle, handle->size);
>>> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
>>> + return 0;
>>> +}
>>> +
>>> +static unsigned long trbe_normal_offset(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = perf_get_aux(handle);
>>> + u64 limit = __trbe_normal_offset(handle);
>>> + u64 head = PERF_IDX2OFF(handle->head, buf);
>>> +
>>> + /*
>>> + * If the head is too close to the limit and we don't
>>> + * have space for a meaningful run, we rather pad it
>>> + * and start fresh.
>>> + */
>>> + if (limit && (limit - head < TRBE_TRACE_MIN_BUF_SIZE)) {
>>> + trbe_pad_buf(handle, limit - head);
>>> + limit = __trbe_normal_offset(handle);
>>> + }
>>> + return limit;
>>> +}
>>> +
>>> +static unsigned long compute_trbe_buffer_limit(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> + unsigned long offset;
>>> +
>>> + if (buf->snapshot)
>>> + offset = trbe_snapshot_offset(handle);
>>> + else
>>> + offset = trbe_normal_offset(handle);
>>> + return buf->trbe_base + offset;
>>> +}
>>> +
>>> +static void clr_trbe_status(void)
>>> +{
>>> + u64 trbsr = read_sysreg_s(SYS_TRBSR_EL1);
>>> +
>>> + WARN_ON(is_trbe_enabled());
>>> + trbsr &= ~TRBSR_IRQ;
>>> + trbsr &= ~TRBSR_TRG;
>>> + trbsr &= ~TRBSR_WRAP;
>>> + trbsr &= ~(TRBSR_EC_MASK << TRBSR_EC_SHIFT);
>>> + trbsr &= ~(TRBSR_BSC_MASK << TRBSR_BSC_SHIFT);
>>> + trbsr &= ~TRBSR_STOP;
>>> + write_sysreg_s(trbsr, SYS_TRBSR_EL1);
>>> +}
>>> +
>>> +static void set_trbe_limit_pointer_enabled(unsigned long addr)
>>> +{
>>> + u64 trblimitr = read_sysreg_s(SYS_TRBLIMITR_EL1);
>>> +
>>> + WARN_ON(!IS_ALIGNED(addr, (1UL << TRBLIMITR_LIMIT_SHIFT)));
>>> + WARN_ON(!IS_ALIGNED(addr, PAGE_SIZE));
>>> +
>>> + trblimitr &= ~TRBLIMITR_NVM;
>>> + trblimitr &= ~(TRBLIMITR_FILL_MODE_MASK << TRBLIMITR_FILL_MODE_SHIFT);
>>> + trblimitr &= ~(TRBLIMITR_TRIG_MODE_MASK << TRBLIMITR_TRIG_MODE_SHIFT);
>>> + trblimitr &= ~(TRBLIMITR_LIMIT_MASK << TRBLIMITR_LIMIT_SHIFT);
>>> +
>>> + /*
>>> + * Fill trace buffer mode is used here while configuring the
>>> + * TRBE for trace capture. In this particular mode, the trace
>>> + * collection is stopped and a maintenance interrupt is raised
>>> + * when the current write pointer wraps. This pause in trace
>>> + * collection gives the software an opportunity to capture the
>>> + * trace data in the interrupt handler, before reconfiguring
>>> + * the TRBE.
>>> + */
>>> + trblimitr |= (TRBE_FILL_MODE_FILL & TRBLIMITR_FILL_MODE_MASK) << TRBLIMITR_FILL_MODE_SHIFT;
>>> +
>>> + /*
>>> + * Trigger mode is not used here while configuring the TRBE for
>>> + * the trace capture. Hence just keep this in the ignore mode.
>>> + */
>>> + trblimitr |= (TRBE_TRIG_MODE_IGNORE & TRBLIMITR_TRIG_MODE_MASK) << TRBLIMITR_TRIG_MODE_SHIFT;
>>> + trblimitr |= (addr & PAGE_MASK);
>>> +
>>> + trblimitr |= TRBLIMITR_ENABLE;
>>> + write_sysreg_s(trblimitr, SYS_TRBLIMITR_EL1);
>>> +}
>>> +
>>> +static void trbe_enable_hw(struct trbe_buf *buf)
>>> +{
>>> + WARN_ON(buf->trbe_write < buf->trbe_base);
>>> + WARN_ON(buf->trbe_write >= buf->trbe_limit);
>>> + set_trbe_disabled();
>>> + isb();
>>> + clr_trbe_status();
>>> + set_trbe_base_pointer(buf->trbe_base);
>>> + set_trbe_write_pointer(buf->trbe_write);
>>> +
>>> + /*
>>> + * Synchronize all the register updates
>>> + * till now before enabling the TRBE.
>>> + */
>>> + isb();
>>> + set_trbe_limit_pointer_enabled(buf->trbe_limit);
>>> +
>>> + /* Synchronize the TRBE enable event */
>>> + isb();
>>> +}
>>> +
>>> +static void *arm_trbe_alloc_buffer(struct coresight_device *csdev,
>>> + struct perf_event *event, void **pages,
>>> + int nr_pages, bool snapshot)
>>> +{
>>> + struct trbe_buf *buf;
>>> + struct page **pglist;
>>> + int i;
>>> +
>>> + /*
>>> + * TRBE LIMIT and TRBE WRITE pointers must be page aligned. But with
>>> + * just a single page, there is not much room left while writing into
>>> + * a partially filled TRBE buffer. Hence restrict the minimum buffer
>>> + * size as two pages.
>>> + */
>>> + if (nr_pages < 2)
>>> + return NULL;
>>> +
>>> + buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, trbe_alloc_node(event));
>>> + if (IS_ERR(buf))
>>> + return ERR_PTR(-ENOMEM);
>>> +
>>> + pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
>>> + if (IS_ERR(pglist)) {
>>> + kfree(buf);
>>> + return ERR_PTR(-ENOMEM);
>>> + }
>>> +
>>> + for (i = 0; i < nr_pages; i++)
>>> + pglist[i] = virt_to_page(pages[i]);
>>> +
>>> + buf->trbe_base = (unsigned long) vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
>>> + if (IS_ERR((void *)buf->trbe_base)) {
>>> + kfree(pglist);
>>> + kfree(buf);
>>> + return ERR_PTR(buf->trbe_base);
>>> + }
>>> + buf->trbe_limit = buf->trbe_base + nr_pages * PAGE_SIZE;
>>> + buf->trbe_write = buf->trbe_base;
>>> + buf->snapshot = snapshot;
>>> + buf->nr_pages = nr_pages;
>>> + buf->pages = pages;
>>> + kfree(pglist);
>>> + return buf;
>>> +}
>>> +
>>> +void arm_trbe_free_buffer(void *config)
>>> +{
>>> + struct trbe_buf *buf = config;
>>> +
>>> + vunmap((void *)buf->trbe_base);
>>> + kfree(buf);
>>> +}
>>> +
>>> +static unsigned long arm_trbe_update_buffer(struct coresight_device *csdev,
>>> + struct perf_output_handle *handle,
>>> + void *config)
>>> +{
>>> + struct trbe_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
>>> + struct trbe_cpudata *cpudata = dev_get_drvdata(&csdev->dev);
>>> + struct trbe_buf *buf = config;
>>> + unsigned long size, offset;
>>> +
>>> + WARN_ON(buf->cpudata != cpudata);
>>> + WARN_ON(cpudata->cpu != smp_processor_id());
>>> + WARN_ON(cpudata->drvdata != drvdata);
>>> + if (cpudata->mode != CS_MODE_PERF)
>>> + return -EINVAL;
>>> +
>>> + /*
>>> + * If the TRBE was disabled due to lack of space in the AUX buffer or a
>>> + * spurious fault, the driver leaves it disabled, truncating the buffer.
>>> + * Since the etm_perf driver expects to close out the AUX buffer, the
>>> + * driver skips it. Thus, just pass in 0 size here to indicate that the
>>> + * buffer was truncated.
>>> + */
>>> + if (!is_trbe_enabled())
>>> + return 0;
>>> + /*
>>> + * perf handle structure needs to be shared with the TRBE IRQ handler for
>>> + * capturing trace data and restarting the handle. There is a probability
>>> + * of an undefined reference based crash when etm event is being stopped
>>> + * while a TRBE IRQ also getting processed. This happens due the release
>>> + * of perf handle via perf_aux_output_end() in etm_event_stop(). Stopping
>>> + * the TRBE here will ensure that no IRQ could be generated when the perf
>>> + * handle gets freed in etm_event_stop().
>>> + */
>>> + trbe_drain_and_disable_local();
>>> + offset = get_trbe_write_pointer() - get_trbe_base_pointer();
>>> + size = offset - PERF_IDX2OFF(handle->head, buf);
>>> + if (buf->snapshot)
>>> + handle->head += size;
>>> + return size;
>>> +}
>>> +
>>> +static int arm_trbe_enable(struct coresight_device *csdev, u32 mode, void *data)
>>> +{
>>> + struct trbe_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
>>> + struct trbe_cpudata *cpudata = dev_get_drvdata(&csdev->dev);
>>> + struct perf_output_handle *handle = data;
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> +
>>> + WARN_ON(cpudata->cpu != smp_processor_id());
>>> + WARN_ON(cpudata->drvdata != drvdata);
>>> + if (mode != CS_MODE_PERF)
>>> + return -EINVAL;
>>> +
>>> + *this_cpu_ptr(drvdata->handle) = handle;
>>> + cpudata->buf = buf;
>>> + cpudata->mode = mode;
>>> + buf->cpudata = cpudata;
>>> + buf->trbe_limit = compute_trbe_buffer_limit(handle);
>>> + buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf);
>>> + if (buf->trbe_limit == buf->trbe_base) {
>>> + trbe_stop_and_truncate_event(handle);
>>> + return 0;
>>> + }
>>> + trbe_enable_hw(buf);
>>> + return 0;
>>> +}
>>> +
>>> +static int arm_trbe_disable(struct coresight_device *csdev)
>>> +{
>>> + struct trbe_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
>>> + struct trbe_cpudata *cpudata = dev_get_drvdata(&csdev->dev);
>>> + struct trbe_buf *buf = cpudata->buf;
>>> +
>>> + WARN_ON(buf->cpudata != cpudata);
>>> + WARN_ON(cpudata->cpu != smp_processor_id());
>>> + WARN_ON(cpudata->drvdata != drvdata);
>>> + if (cpudata->mode != CS_MODE_PERF)
>>> + return -EINVAL;
>>> +
>>> + trbe_drain_and_disable_local();
>>> + buf->cpudata = NULL;
>>> + cpudata->buf = NULL;
>>> + cpudata->mode = CS_MODE_DISABLED;
>>> + return 0;
>>> +}
>>> +
>>> +static void trbe_handle_spurious(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> +
>>> + buf->trbe_limit = compute_trbe_buffer_limit(handle);
>>> + buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf);
>>> + if (buf->trbe_limit == buf->trbe_base) {
>>> + trbe_drain_and_disable_local();
>>> + return;
>>> + }
>>> + trbe_enable_hw(buf);
>>> +}
>>> +
>>> +static void trbe_handle_overflow(struct perf_output_handle *handle)
>>> +{
>>> + struct perf_event *event = handle->event;
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> + unsigned long offset, size;
>>> + struct etm_event_data *event_data;
>>> +
>>> + offset = get_trbe_limit_pointer() - get_trbe_base_pointer();
>>> + size = offset - PERF_IDX2OFF(handle->head, buf);
>>> + if (buf->snapshot)
>>> + handle->head = offset;
>>> + perf_aux_output_end(handle, size);
>>> +
>>> + event_data = perf_aux_output_begin(handle, event);
>>> + if (!event_data) {
>>> + trbe_drain_and_disable_local();
>>> + *this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL;
>>> + return;
>>> + }
>>> + buf->trbe_limit = compute_trbe_buffer_limit(handle);
>>> + buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf);
>>> + if (buf->trbe_limit == buf->trbe_base) {
>>> + trbe_stop_and_truncate_event(handle);
>>> + return;
>>> + }
>>> + *this_cpu_ptr(buf->cpudata->drvdata->handle) = handle;
>>> + trbe_enable_hw(buf);
>>> +}
>>> +
>>> +static bool is_perf_trbe(struct perf_output_handle *handle)
>>> +{
>>> + struct trbe_buf *buf = etm_perf_sink_config(handle);
>>> + struct trbe_cpudata *cpudata = buf->cpudata;
>>> + struct trbe_drvdata *drvdata = cpudata->drvdata;
>>> + int cpu = smp_processor_id();
>>> +
>>> + WARN_ON(buf->trbe_base != get_trbe_base_pointer());
>>> + WARN_ON(buf->trbe_limit != get_trbe_limit_pointer());
>>> +
>>> + if (cpudata->mode != CS_MODE_PERF)
>>> + return false;
>>> +
>>> + if (cpudata->cpu != cpu)
>>> + return false;
>>> +
>>> + if (!cpumask_test_cpu(cpu, &drvdata->supported_cpus))
>>> + return false;
>>> +
>>> + return true;
>>> +}
>>> +
>>> +static enum trbe_fault_action trbe_get_fault_act(struct perf_output_handle *handle)
>>> +{
>>> + u64 trbsr = read_sysreg_s(SYS_TRBSR_EL1);
>>> + int ec = get_trbe_ec(trbsr);
>>> + int bsc = get_trbe_bsc(trbsr);
>>> +
>>> + WARN_ON(is_trbe_running(trbsr));
>>> + if (is_trbe_trg(trbsr) || is_trbe_abort(trbsr))
>>> + return TRBE_FAULT_ACT_FATAL;
>>> +
>>> + if ((ec == TRBE_EC_STAGE1_ABORT) || (ec == TRBE_EC_STAGE2_ABORT))
>>> + return TRBE_FAULT_ACT_FATAL;
>>> +
>>> + if (is_trbe_wrap(trbsr) && (ec == TRBE_EC_OTHERS) && (bsc == TRBE_BSC_FILLED)) {
>>> + if (get_trbe_write_pointer() == get_trbe_base_pointer())
>>> + return TRBE_FAULT_ACT_WRAP;
>>> + }
>>> + return TRBE_FAULT_ACT_SPURIOUS;
>>> +}
>>> +
>>> +static irqreturn_t arm_trbe_irq_handler(int irq, void *dev)
>>> +{
>>> + struct perf_output_handle **handle_ptr = dev;
>>> + struct perf_output_handle *handle = *handle_ptr;
>>> + enum trbe_fault_action act;
>>> +
>>> + WARN_ON(!is_trbe_irq(read_sysreg_s(SYS_TRBSR_EL1)));
>>> + clr_trbe_irq();
>>> +
>>> + /*
>>> + * Ensure the trace is visible to the CPUs and
>>> + * any external aborts have been resolved.
>>> + */
>>> + trbe_drain_buffer();
>>> + isb();
>>> +
>>> + if (!perf_get_aux(handle))
>>> + return IRQ_NONE;
>>> +
>>> + if (!is_perf_trbe(handle))
>>> + return IRQ_NONE;
>>> +
>>> + irq_work_run();
>
> There is a comment in the SPE driver about this. Since this driver closely
> follows that implementation it would be nice to have the comments as well.
> Otherwise the reader has to constantly go back to the original driver.
Sure, will add the following comment before irq_work_run().
/*
* Ensure perf callbacks have completed, which may disable the
* profiling buffer in response to a TRUNCATION flag.
*/
>
> I will come back to this function later.
Okay.
>
>>> +
>>> + act = trbe_get_fault_act(handle);
>>> + switch (act) {
>>> + case TRBE_FAULT_ACT_WRAP:
>>> + trbe_handle_overflow(handle);
>>> + break;
>>> + case TRBE_FAULT_ACT_SPURIOUS:
>>> + trbe_handle_spurious(handle);
>>> + break;
>>> + case TRBE_FAULT_ACT_FATAL:
>>> + trbe_stop_and_truncate_event(handle);
>>> + break;
>>> + }
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> +static const struct coresight_ops_sink arm_trbe_sink_ops = {
>>> + .enable = arm_trbe_enable,
>>> + .disable = arm_trbe_disable,
>>> + .alloc_buffer = arm_trbe_alloc_buffer,
>>> + .free_buffer = arm_trbe_free_buffer,
>>> + .update_buffer = arm_trbe_update_buffer,
>>> +};
>>> +
>>> +static const struct coresight_ops arm_trbe_cs_ops = {
>>> + .sink_ops = &arm_trbe_sink_ops,
>>> +};
>>> +
>>> +static ssize_t align_show(struct device *dev, struct device_attribute *attr, char *buf)
>>> +{
>>> + struct trbe_cpudata *cpudata = dev_get_drvdata(dev);
>>> +
>>> + return sprintf(buf, "%llx\n", cpudata->trbe_align);
>>> +}
>>> +static DEVICE_ATTR_RO(align);
>>> +
>>> +static ssize_t dbm_show(struct device *dev, struct device_attribute *attr, char *buf)
>>> +{
>>> + struct trbe_cpudata *cpudata = dev_get_drvdata(dev);
>>> +
>>> + return sprintf(buf, "%d\n", cpudata->trbe_dbm);
>>> +}
>>> +static DEVICE_ATTR_RO(dbm);
>>> +
>>> +static struct attribute *arm_trbe_attrs[] = {
>>> + &dev_attr_align.attr,
>>> + &dev_attr_dbm.attr,
>>> + NULL,
>>> +};
>>> +
>>> +static const struct attribute_group arm_trbe_group = {
>>> + .attrs = arm_trbe_attrs,
>>> +};
>>> +
>>> +static const struct attribute_group *arm_trbe_groups[] = {
>>> + &arm_trbe_group,
>>> + NULL,
>>> +};
>>> +
>>> +static void arm_trbe_probe_coresight_cpu(void *info)
>>> +{
>>> + struct trbe_drvdata *drvdata = info;
>>> + struct coresight_desc desc = { 0 };
>>> + int cpu = smp_processor_id();
>>> + struct trbe_cpudata *cpudata = per_cpu_ptr(drvdata->cpudata, cpu);
>>> + struct coresight_device *trbe_csdev = per_cpu(csdev_sink, cpu);
>>> + u64 trbidr = read_sysreg_s(SYS_TRBIDR_EL1);
>>> + struct device *dev;
>>> +
>>> + if (WARN_ON(!cpudata))
>>> + goto cpu_clear;
>
> Where was the memory for cpudata allocated? As far as I can tell, at this time
> it is just a pointer that was not allocated and as such it should be NULL.
cpudata gets allocated in arm_trbe_probe_coresight() just before calling
individual CPU based probes i.e arm_trbe_probe_coresight_cpu() directly
and via smp_call_function_many().
arm_trbe_device_probe()
arm_trbe_probe_coresight()
arm_trbe_probe_coresight_cpu()
>
>>> +
>>> + if (trbe_csdev)
>>> + return;
>>> +
>>> + cpudata->cpu = smp_processor_id();
>
> Why call this again when you already did above? And how is
Right, this is redundant. Will just assign it as cpu which has already
been computed.
> arm_trbe_probe_coresight_cpu() is called for every CPU in the system?
During boot in arm_trbe_probe_coresight(), it is called once directly on
the executing cpu and on all other via smp_call_function_many().
>
>>> + cpudata->drvdata = drvdata;
>>> + dev = &cpudata->drvdata->pdev->dev;
>>> +
>>> + if (!is_trbe_available()) {
>>> + pr_err("TRBE is not implemented on cpu %d\n", cpudata->cpu);
>>> + goto cpu_clear;
>>> + }
>>> +
>>> + if (!is_trbe_programmable(trbidr)) {
>>> + pr_err("TRBE is owned in higher exception level on cpu %d\n", cpudata->cpu);
>>> + goto cpu_clear;
>>> + }
>>> + desc.name = devm_kasprintf(dev, GFP_KERNEL, "%s%d", DRVNAME, smp_processor_id());
>>> + if (IS_ERR(desc.name))
>>> + goto cpu_clear;
>>> +
>>> + desc.type = CORESIGHT_DEV_TYPE_SINK;
>>> + desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_PERCPU_SYSMEM;
>>> + desc.ops = &arm_trbe_cs_ops;
>>> + desc.pdata = dev_get_platdata(dev);
>>> + desc.groups = arm_trbe_groups;
>>> + desc.dev = dev;
>>> + trbe_csdev = coresight_register(&desc);
>>> + if (IS_ERR(trbe_csdev))
>>> + goto cpu_clear;
>>> +
>>> + dev_set_drvdata(&trbe_csdev->dev, cpudata);
>>> + cpudata->trbe_dbm = get_trbe_flag_update(trbidr);
>>> + cpudata->trbe_align = 1ULL << get_trbe_address_align(trbidr);
>>> + if (cpudata->trbe_align > SZ_2K) {
>>> + pr_err("Unsupported alignment on cpu %d\n", cpudata->cpu);
>>> + goto cpu_clear;
>>> + }
>>> + per_cpu(csdev_sink, cpu) = trbe_csdev;
>>> + trbe_reset_local();
>>> + enable_percpu_irq(drvdata->irq, IRQ_TYPE_NONE);
>>> + return;
>>> +cpu_clear:
>>> + cpumask_clear_cpu(cpudata->cpu, &cpudata->drvdata->supported_cpus);
>>> +}
>>> +
>>> +static void arm_trbe_remove_coresight_cpu(void *info)
>>> +{
>>> + int cpu = smp_processor_id();
>>> + struct trbe_drvdata *drvdata = info;
>>> + struct trbe_cpudata *cpudata = per_cpu_ptr(drvdata->cpudata, cpu);
>>> + struct coresight_device *trbe_csdev = per_cpu(csdev_sink, cpu);
>>> +
>>> + if (trbe_csdev) {
>>> + coresight_unregister(trbe_csdev);
>>> + cpudata->drvdata = NULL;
>>> + per_cpu(csdev_sink, cpu) = NULL;
>>> + }
>>> + disable_percpu_irq(drvdata->irq);
>>> + trbe_reset_local();
>>> +}
>>> +
>>> +static int arm_trbe_probe_coresight(struct trbe_drvdata *drvdata)
>>> +{
>>> + drvdata->cpudata = alloc_percpu(typeof(*drvdata->cpudata));
>>> + if (IS_ERR(drvdata->cpudata))
>>> + return PTR_ERR(drvdata->cpudata);
>>> +
>>> + arm_trbe_probe_coresight_cpu(drvdata);
>>> + smp_call_function_many(&drvdata->supported_cpus, arm_trbe_probe_coresight_cpu, drvdata, 1);
>>> + return 0;
>>> +}
>>> +
>>> +static int arm_trbe_remove_coresight(struct trbe_drvdata *drvdata)
>>> +{
>>> + arm_trbe_remove_coresight_cpu(drvdata);
>>> + smp_call_function_many(&drvdata->supported_cpus, arm_trbe_remove_coresight_cpu, drvdata, 1);
>>> + free_percpu(drvdata->cpudata);
>>> + return 0;
>>> +}
>>> +
>>> +static int arm_trbe_cpu_startup(unsigned int cpu, struct hlist_node *node)
>>> +{
>>> + struct trbe_drvdata *drvdata = hlist_entry_safe(node, struct trbe_drvdata, hotplug_node);
>>> +
>>> + if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) {
>>> + if (!per_cpu(csdev_sink, cpu)) {
>>> + arm_trbe_probe_coresight_cpu(drvdata);
>>> + } else {
>>> + trbe_reset_local();
>>> + enable_percpu_irq(drvdata->irq, IRQ_TYPE_NONE);
>>> + }
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int arm_trbe_cpu_teardown(unsigned int cpu, struct hlist_node *node)
>>> +{
>>> + struct trbe_drvdata *drvdata = hlist_entry_safe(node, struct trbe_drvdata, hotplug_node);
>>> +
>>> + if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) {
>>> + disable_percpu_irq(drvdata->irq);
>>> + trbe_reset_local();
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int arm_trbe_probe_cpuhp(struct trbe_drvdata *drvdata)
>>> +{
>>> + enum cpuhp_state trbe_online;
>>> +
>>> + trbe_online = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
>>> + arm_trbe_cpu_startup, arm_trbe_cpu_teardown);
>>> + if (trbe_online < 0)
>>> + return -EINVAL;
>>> +
>>> + if (cpuhp_state_add_instance(trbe_online, &drvdata->hotplug_node))
>>> + return -EINVAL;
>>> +
>>> + drvdata->trbe_online = trbe_online;
>>> + return 0;
>>> +}
>>> +
>>> +static void arm_trbe_remove_cpuhp(struct trbe_drvdata *drvdata)
>>> +{
>>> + cpuhp_remove_multi_state(drvdata->trbe_online);
>>> +}
>>> +
>>> +static int arm_trbe_probe_irq(struct platform_device *pdev,
>>> + struct trbe_drvdata *drvdata)
>>> +{
>>> + drvdata->irq = platform_get_irq(pdev, 0);
>>> + if (!drvdata->irq) {
>
> Please use function platform_get_irq() properly - there is even an example on
> how to do so in the documentation section of the function.
The documentation says, the format should be.
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Will change the conditional check above.
>
>>> + pr_err("IRQ not found for the platform device\n");
>>> + return -ENXIO;
>
> Why use a different error code?
We could return the irq (which is < 0) but followed the SPE
driver which returns ENXIO here. Happy to change either way.
>
>>> + }
>>> +
>>> + if (!irq_is_percpu(drvdata->irq)) {
>>> + pr_err("IRQ is not a PPI\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (irq_get_percpu_devid_partition(drvdata->irq, &drvdata->supported_cpus))
>>> + return -EINVAL;
>>> +
>>> + drvdata->handle = alloc_percpu(typeof(*drvdata->handle));
>>> + if (!drvdata->handle)
>>> + return -ENOMEM;
>>> +
>>> + if (request_percpu_irq(drvdata->irq, arm_trbe_irq_handler, DRVNAME, drvdata->handle)) {
>>> + free_percpu(drvdata->handle);
>>> + return -EINVAL;
>
> Here too you need to use the error code from the calling function rather than
> making your own. Please revise for the entire patch.
Okay, will capture the return value from request_percpu_irq() and
return the same when it is an error case i.e being positive.
>
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static void arm_trbe_remove_irq(struct trbe_drvdata *drvdata)
>>> +{
>>> + free_percpu_irq(drvdata->irq, drvdata->handle);
>>> + free_percpu(drvdata->handle);
>>> +}
>>> +
>>> +static int arm_trbe_device_probe(struct platform_device *pdev)
>>> +{
>>> + struct coresight_platform_data *pdata;
>>> + struct trbe_drvdata *drvdata;
>>> + struct device *dev = &pdev->dev;
>>> + int ret;
>>> +
>>> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
>>> + if (IS_ERR(drvdata))
>>> + return -ENOMEM;
>
> if (!drvdata)
Changed.
>
>>> +
>>> + pdata = coresight_get_platform_data(dev);
>>> + if (IS_ERR(pdata)) {
>>> + kfree(drvdata);
>
> No need to do this since devm_kzalloc() was used above.
Suzuki had pointed out these issues, have already incorporated them i.e
dropped kfree() here.
>
>>> + return -ENOMEM;
>
> Why not using the error from coresight_get_platform_data() instead of
> masking it?
Okay, will return PTR_ERR(pdata) instead.
>
>>> + }
>>> +
>>> + dev_set_drvdata(dev, drvdata);
>>> + dev->platform_data = pdata;
>>> + drvdata->pdev = pdev;
>>> + ret = arm_trbe_probe_irq(pdev, drvdata);
>>> + if (ret)
>>> + goto irq_failed;
>>> +
>>> + ret = arm_trbe_probe_coresight(drvdata);
>>> + if (ret)
>>> + goto probe_failed;
>>> +
>>> + ret = arm_trbe_probe_cpuhp(drvdata);
>>> + if (ret)
>>> + goto cpuhp_failed;
>>> +
>>> + return 0;
>>> +cpuhp_failed:
>>> + arm_trbe_remove_coresight(drvdata);
>>> +probe_failed:
>>> + arm_trbe_remove_irq(drvdata);
>>> +irq_failed:
>>> + kfree(pdata);
>>> + kfree(drvdata);
>
> Same here - both @pdata and @drvdata have been allocated by devm_kzalloc().
> devm_kzalloc().
Dropped these kfree() statements.
- Anshuman
More information about the linux-arm-kernel
mailing list