[PATCH mvebu v2 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz

[Pali Rohár]

On Tuesday 09 February 2021 13:45:08 nnet wrote:
> On Tue, Feb 9, 2021, at 1:33 PM, Pali Rohár wrote:
> > On Tuesday 09 February 2021 13:00:26 nnet wrote:
> > > > If you have other Armada 3720 boards (Espressobin v5/v7, uDPU, Devel Board, ...) then it will be nice to do an additional tests and check if instability issues are finally fixed.
> > > 
> > > These patches applied to the 5.4.96 in OpenWrt (98d61b5) work fine so far on an Espressobin v7 AFAICT per changing values in /sys/devices/system/cpu/cpufreq/policy0.
> > > 
> > > Are these changes intended to work @1.2 GHz on the v7?
> > 
> > Hello! Do you have 1.2 GHz A3720 SoC?
> 
> Maybe (not)? ESPRESSObin_V7_1-0 on the underside.

Look at the package of SoC chip. On top of the package is printed
identifier 88F3720. On the last line should be one of the string:
C080, C100, C120, I080, I100 which identifies frequency
(080 = 800 MHz, 100 = 1 GHz, 120 = 1.2 GHz)

Can you check what is printed on A3720 SoC package?

> BTW, with the 1200_750 firmware and the patches:
> 
> root at OpenWrt:/sys/devices/system/cpu/cpufreq/policy0# cat scaling_available_frequencies 
> 200000 300000 600000 1200000
> 
> Of course that could mean nothing, but thought I'd mention what I do see.

This is value set by firmware file which you have started.