[PATCH 1/2] dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs

[Suman Anna]

On 2/9/21 11:19 AM, Bjorn Andersson wrote:
> On Tue 09 Feb 11:09 CST 2021, Suman Anna wrote:
> 
>> Hi Rob,
>>
>> On 2/9/21 11:00 AM, Rob Herring wrote:
>>> On Mon, Jan 25, 2021 at 05:56:52PM -0600, Suman Anna wrote:
>>>> Update the existing OMAP HwSpinlock binding to include the info for
>>>> AM64x SoCs. There are some minor IP integration differences between
>>>> the AM64x SoCs and the previous AM65x and J721E SoC families. A new
>>>> example is also added showcasing the difference in the IP's presence
>>>> on the interconnect.
>>>>
>>>> Signed-off-by: Suman Anna <s-anna at ti.com>
>>>> ---
>>>>  .../bindings/hwlock/ti,omap-hwspinlock.yaml   | 26 +++++++++++++++++++
>>>>  1 file changed, 26 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
>>>> index ac35491a6f65..ac146c0d628f 100644
>>>> --- a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
>>>> +++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
>>>> @@ -14,6 +14,7 @@ properties:
>>>>      enum:
>>>>        - ti,omap4-hwspinlock  # for OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
>>>>        - ti,am654-hwspinlock  # for K3 AM65x, J721E and J7200 SoCs
>>>> +      - ti,am64-hwspinlock   # for K3 AM64x SoCs
>>>>  
>>>>    reg:
>>>>      maxItems: 1
>>>> @@ -74,3 +75,28 @@ examples:
>>>>              };
>>>>          };
>>>>      };
>>>> +
>>>> +  - |
>>>> +    / {
>>>> +        /* K3 AM64x SoCs */
>>>> +        model = "Texas Instruments K3 AM642 SoC";
>>>> +        compatible = "ti,am642-evm", "ti,am642";
>>>> +        #address-cells = <2>;
>>>> +        #size-cells = <2>;
>>>> +
>>>> +        bus at f4000 {
>>>> +            compatible = "simple-bus";
>>>> +            #address-cells = <2>;
>>>> +            #size-cells = <2>;
>>>> +            ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
>>>> +                     <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
>>>> +                     <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
>>>> +                     <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>; /* Third peripheral window */
>>>> +
>>>> +            spinlock at 2a000000 {
>>>
>>> Why are you doing the whole hierarchy here? Don't do that.
>>
>> I added it because it's integration is slightly different and to help our
>> downstream consumers.
>>
>>>
>>> In any case, a new compatible doesn't warrant a whole new example, so 
>>> drop the example.
>>
>> Yeah ok, will drop the example.
>>
> 
> I was just waiting for my build test to pass before pushing this and a
> few other patches out, will drop the example from the patch here.  No
> need to resend.

Oops, didn't see this message in time. I have just posted my v2, and you can
pick that up directly as I had to remove the last line from the patch
description too.

Thanks,
Suman

> 
> Thanks,
> Bjorn
> 
>> regards
>> Suman
>>
>>>
>>>> +                compatible = "ti,am64-hwspinlock";
>>>> +                reg = <0x00 0x2a000000 0x00 0x1000>;
>>>> +                #hwlock-cells = <1>;
>>>> +            };
>>>> +        };
>>>> +    };
>>>> -- 
>>>> 2.29.2
>>>>
>>