[PATCH] clk: at91: sama5d2: Mark device OF_POPULATED after setup

[Stephen Boyd]

Quoting Saravana Kannan (2021-01-28 09:01:41)
> On Thu, Jan 28, 2021 at 2:45 AM Tudor Ambarus
> <tudor.ambarus at microchip.com> wrote:
> >
> > The sama5d2 requires the clock provider initialized before timers.
> > We can't use a platform driver for the sama5d2-pmc driver, as the
> > platform_bus_init() is called later on, after time_init().
> >
> > As fw_devlink considers only devices, it does not know that the
> > pmc is ready. Hence probing of devices that depend on it fail:
> > probe deferral - supplier f0014000.pmc not ready
> >
> > Fix this by setting the OF_POPULATED flag for the sama5d2_pmc
> > device node after successful setup. This will make
> > of_link_to_phandle() ignore the sama5d2_pmc device node as a
> > dependency, and consumer devices will be probed again.
> >
> > Fixes: e590474768f1cc04 ("driver core: Set fw_devlink=on by default")
> > Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
> > ---
> > I'll be out of office, will check the rest of the at91 SoCs
> > at the begining of next week.
> >
> >  drivers/clk/at91/sama5d2.c | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
> > index 9a5cbc7cd55a..5eea2b4a63dd 100644
> > --- a/drivers/clk/at91/sama5d2.c
> > +++ b/drivers/clk/at91/sama5d2.c
> > @@ -367,6 +367,8 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
> >
> >         of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d2_pmc);
> >
> > +       of_node_set_flag(np, OF_POPULATED);
> > +
> >         return;
> 
> Hi Tudor,
> 
> Thanks for looking into this.
> 
> I already accounted for early clocks like this when I designed
> fw_devlink. Each driver shouldn't need to set OF_POPULATED.
> drivers/clk/clk.c already does this for you.
> 
> I think the problem is that your driver is using
> CLK_OF_DECLARE_DRIVER() instead of CLK_OF_DECLARE(). The comments for
> CLK_OF_DECLARE_DRIVER() says:
> /*
>  * Use this macro when you have a driver that requires two initialization
>  * routines, one at of_clk_init(), and one at platform device probe
>  */
> 
> In your case, you are explicitly NOT having a driver bind to this
> clock later. So you shouldn't be using CLK_OF_DECLARE() instead.
> 

I see 

drivers/power/reset/at91-sama5d2_shdwc.c:       { .compatible = "atmel,sama5d2-pmc" },

so isn't that the driver that wants to bind to the same device node
again? First at of_clk_init() time here and then second for the reset
driver?