[PATCH 05/18] tty: serial: samsung_tty: add support for Apple UARTs
Krzysztof Kozlowski
krzk at kernel.org
Mon Feb 8 05:54:51 EST 2021
On Fri, Feb 05, 2021 at 05:39:38AM +0900, Hector Martin wrote:
> Apple SoCs are a distant descendant of Samsung designs and use yet
> another variant of their UART style, with different interrupt handling.
>
> In particular, this variant has the following differences with existing
> ones:
>
> * It includes a built-in interrupt controller with different registers,
> using only a single platform IRQ
>
> * Internal interrupt sources are treated as edge-triggered, even though
> the IRQ output is level-triggered. This chiefly affects the TX IRQ
> path: the driver can no longer rely on the TX buffer empty IRQ
> immediately firing after TX is enabled, but instead must prime the
> FIFO with data directly.
>
> Signed-off-by: Hector Martin <marcan at marcan.st>
> ---
> drivers/tty/serial/samsung_tty.c | 297 +++++++++++++++++++++++++++----
> include/linux/serial_s3c.h | 16 ++
> include/uapi/linux/serial_core.h | 3 +
> 3 files changed, 280 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 8ae3e03fbd8c..6d812ba1b748 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -56,6 +56,9 @@
> /* flag to ignore all characters coming in */
> #define RXSTAT_DUMMY_READ (0x10000000)
>
> +/* IRQ number used when the handler is called in non-IRQ context */
> +#define NO_IRQ -1
> +
> struct s3c24xx_uart_info {
> char *name;
> unsigned int type;
> @@ -144,6 +147,14 @@ struct s3c24xx_uart_port {
> #endif
> };
>
> +enum s3c24xx_irq_type {
> + IRQ_DISCRETE = 0,
> + IRQ_S3C6400 = 1,
> + IRQ_APPLE = 2,
It seems you add the third structure to differentiate type of UART.
There is already port type and s3c24xx_serial_drv_data, no need for
third structure (kind of similar to tries of Tamseel Shams in recent
patches). It's too much. Instead, differentiate by port type or prepare
own set of uart_ops if it's really different (like you did with startup
op).
> +};
> +
> +static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
> +
> /* conversion functions */
>
> #define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
> @@ -231,11 +242,20 @@ static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
> /*
> * s3c64xx and later SoC's include the interrupt mask and status registers in
> * the controller itself, unlike the s3c24xx SoC's which have these registers
> - * in the interrupt controller. Check if the port type is s3c64xx or higher.
> + * in the interrupt controller. Apple SoCs use a different flavor of mask
> + * and status registers. This function returns the IRQ style to use.
> */
> -static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port)
> +static int s3c24xx_irq_type(struct uart_port *port)
> {
> - return to_ourport(port)->info->type == PORT_S3C6400;
> + switch (to_ourport(port)->info->type) {
> + case PORT_S3C6400:
> + return IRQ_S3C6400;
> + case PORT_APPLE:
> + return IRQ_APPLE;
> + default:
> + return IRQ_DISCRETE;
> + }
> +
No empty lines at end of function.
> }
>
> static void s3c24xx_serial_rx_enable(struct uart_port *port)
> @@ -289,10 +309,17 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
> if (!ourport->tx_enabled)
> return;
>
> - if (s3c24xx_serial_has_interrupt_mask(port))
> + switch (s3c24xx_irq_type(port)) {
> + case IRQ_APPLE:
> + s3c24xx_clear_bit(port, APPLE_UCON_TXTHRESH_ENA, S3C2410_UCON);
> + break;
> + case IRQ_S3C6400:
> s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
> - else
> + break;
> + default:
> disable_irq_nosync(ourport->tx_irq);
> + break;
> + }
>
> if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
> dmaengine_pause(dma->tx_chan);
> @@ -315,8 +342,6 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
> ourport->tx_mode = 0;
> }
>
> -static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
> -
> static void s3c24xx_serial_tx_dma_complete(void *args)
> {
> struct s3c24xx_uart_port *ourport = args;
> @@ -353,10 +378,17 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
> u32 ucon;
>
> /* Mask Tx interrupt */
> - if (s3c24xx_serial_has_interrupt_mask(port))
> + switch (s3c24xx_irq_type(port)) {
> + case IRQ_APPLE:
> + WARN_ON(1); // No DMA
> + break;
> + case IRQ_S3C6400:
> s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
> - else
> + break;
> + default:
> disable_irq_nosync(ourport->tx_irq);
> + break;
> + }
>
> /* Enable tx dma mode */
> ucon = rd_regl(port, S3C2410_UCON);
> @@ -369,6 +401,8 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
> ourport->tx_mode = S3C24XX_TX_DMA;
> }
>
> +static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id);
> +
> static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
> {
> struct uart_port *port = &ourport->port;
> @@ -383,16 +417,30 @@ static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
> ucon = rd_regl(port, S3C2410_UCON);
> ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
> ucon |= S3C64XX_UCON_TXMODE_CPU;
> - wr_regl(port, S3C2410_UCON, ucon);
>
> /* Unmask Tx interrupt */
> - if (s3c24xx_serial_has_interrupt_mask(port))
> - s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
> - S3C64XX_UINTM);
> - else
> + switch (s3c24xx_irq_type(port)) {
> + case IRQ_APPLE:
> + ucon |= APPLE_UCON_TXTHRESH_ENA_MSK;
> + break;
> + case IRQ_S3C6400:
> + s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
> + break;
> + default:
> enable_irq(ourport->tx_irq);
> + break;
> + }
> +
> + wr_regl(port, S3C2410_UCON, ucon);
>
> ourport->tx_mode = S3C24XX_TX_PIO;
> +
> + /*
> + * The Apple version only has edge triggered TX IRQs, so we need
> + * to kick off the process by sending some characters here.
> + */
> + if (s3c24xx_irq_type(port) == IRQ_APPLE)
> + s3c24xx_serial_tx_chars(NO_IRQ, ourport);
> }
>
> static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
> @@ -513,11 +561,18 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
>
> if (ourport->rx_enabled) {
> dev_dbg(port->dev, "stopping rx\n");
> - if (s3c24xx_serial_has_interrupt_mask(port))
> - s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
> - S3C64XX_UINTM);
> - else
> - disable_irq_nosync(ourport->rx_irq);
> + switch (s3c24xx_irq_type(port)) {
> + case IRQ_APPLE:
> + s3c24xx_clear_bit(port, APPLE_UCON_RXTHRESH_ENA, S3C2410_UCON);
> + s3c24xx_clear_bit(port, APPLE_UCON_RXTO_ENA, S3C2410_UCON);
> + break;
> + case IRQ_S3C6400:
> + s3c24xx_set_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
> + break;
> + default:
> + disable_irq_nosync(ourport->tx_irq);
> + break;
> + }
> ourport->rx_enabled = 0;
> }
> if (dma && dma->rx_chan) {
> @@ -651,14 +706,18 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
>
> /* set Rx mode to DMA mode */
> ucon = rd_regl(port, S3C2410_UCON);
> - ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
> - S3C64XX_UCON_EMPTYINT_EN |
> - S3C64XX_UCON_DMASUS_EN |
> - S3C64XX_UCON_TIMEOUT_EN |
> - S3C64XX_UCON_RXMODE_MASK);
> - ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
> - S3C64XX_UCON_TIMEOUT_EN |
> - S3C64XX_UCON_RXMODE_CPU;
> + ucon &= ~S3C64XX_UCON_RXMODE_MASK;
> + ucon |= S3C64XX_UCON_RXMODE_CPU;
> +
> + /* Apple types use these bits for IRQ masks */
> + if (s3c24xx_irq_type(port) != IRQ_APPLE) {
> + ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
> + S3C64XX_UCON_EMPTYINT_EN |
> + S3C64XX_UCON_DMASUS_EN |
> + S3C64XX_UCON_TIMEOUT_EN);
> + ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
> + S3C64XX_UCON_TIMEOUT_EN;
> + }
> wr_regl(port, S3C2410_UCON, ucon);
>
> ourport->rx_mode = S3C24XX_RX_PIO;
> @@ -831,7 +890,9 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
> unsigned long flags;
> int count, dma_count = 0;
>
> - spin_lock_irqsave(&port->lock, flags);
> + /* Only lock if called from IRQ context */
> + if (irq != NO_IRQ)
> + spin_lock_irqsave(&port->lock, flags);
I would prefer to have two functions - unlocked (doing actual stuff) and
a locking wrapper. Something like is done for regulator_is_enabled().
However the s3c24xx_serial_tx_chars() also unlocks-locks inside, so it
might be not easy to split common part Anyway hacking interrupt handler
to NO_IRQ is confusing and not readable.
>
> count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
>
> @@ -893,7 +954,8 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
> s3c24xx_serial_stop_tx(port);
>
> out:
> - spin_unlock_irqrestore(&port->lock, flags);
> + if (irq != NO_IRQ)
> + spin_unlock_irqrestore(&port->lock, flags);
> return IRQ_HANDLED;
> }
>
> @@ -916,6 +978,26 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
> return ret;
> }
>
> +/* interrupt handler for Apple SoC's.*/
> +static irqreturn_t apple_serial_handle_irq(int irq, void *id)
> +{
> + struct s3c24xx_uart_port *ourport = id;
> + struct uart_port *port = &ourport->port;
> + unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
> + irqreturn_t ret = IRQ_HANDLED;
> +
> + if (pend & (APPLE_UTRSTAT_RXTHRESH | APPLE_UTRSTAT_RXTO)) {
> + wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_RXTHRESH | APPLE_UTRSTAT_RXTO);
> + ret = s3c24xx_serial_rx_chars(irq, id);
> + }
> + if (pend & APPLE_UTRSTAT_TXTHRESH) {
> + wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_TXTHRESH);
> + ret = s3c24xx_serial_tx_chars(irq, id);
> + }
> +
> + return ret;
> +}
> +
> static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
> {
> struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
> @@ -1098,7 +1180,7 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
> struct s3c24xx_uart_port *ourport = to_ourport(port);
>
> if (ourport->tx_claimed) {
> - if (!s3c24xx_serial_has_interrupt_mask(port))
> + if (s3c24xx_irq_type(port) == IRQ_DISCRETE)
> free_irq(ourport->tx_irq, ourport);
> ourport->tx_enabled = 0;
> ourport->tx_claimed = 0;
> @@ -1106,18 +1188,34 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
> }
>
> if (ourport->rx_claimed) {
> - if (!s3c24xx_serial_has_interrupt_mask(port))
> + if (s3c24xx_irq_type(port) == IRQ_DISCRETE)
> free_irq(ourport->rx_irq, ourport);
> ourport->rx_claimed = 0;
> ourport->rx_enabled = 0;
> }
>
> /* Clear pending interrupts and mask all interrupts */
> - if (s3c24xx_serial_has_interrupt_mask(port)) {
> + switch (s3c24xx_irq_type(port)) {
> + case IRQ_APPLE: {
> + unsigned int ucon;
> +
> + ucon = rd_regl(port, S3C2410_UCON);
> + ucon &= ~(APPLE_UCON_TXTHRESH_ENA_MSK |
> + APPLE_UCON_RXTHRESH_ENA_MSK |
> + APPLE_UCON_RXTO_ENA_MSK);
> + wr_regl(port, S3C2410_UCON, ucon);
> +
> + wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_ALL_FLAGS);
> +
> + free_irq(port->irq, ourport);
> + break;
> + }
> + case IRQ_S3C6400:
> free_irq(port->irq, ourport);
>
> wr_regl(port, S3C64XX_UINTP, 0xf);
> wr_regl(port, S3C64XX_UINTM, 0xf);
> + break;
> }
>
> if (ourport->dma)
> @@ -1215,6 +1313,47 @@ static int s3c64xx_serial_startup(struct uart_port *port)
> return ret;
> }
>
> +static int apple_serial_startup(struct uart_port *port)
> +{
> + struct s3c24xx_uart_port *ourport = to_ourport(port);
> + unsigned long flags;
> + unsigned int ufcon;
> + int ret;
> +
> + wr_regl(port, S3C2410_UTRSTAT, APPLE_UTRSTAT_ALL_FLAGS);
> +
> + ret = request_irq(port->irq, apple_serial_handle_irq, IRQF_SHARED,
> + s3c24xx_serial_portname(port), ourport);
> + if (ret) {
> + dev_err(port->dev, "cannot get irq %d\n", port->irq);
> + return ret;
> + }
> +
> + /* For compatibility with s3c24xx Soc's */
> + ourport->rx_enabled = 1;
> + ourport->rx_claimed = 1;
> + ourport->tx_enabled = 0;
> + ourport->tx_claimed = 1;
> +
> + spin_lock_irqsave(&port->lock, flags);
> +
> + ufcon = rd_regl(port, S3C2410_UFCON);
> + ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
> + if (!uart_console(port))
> + ufcon |= S3C2410_UFCON_RESETTX;
> + wr_regl(port, S3C2410_UFCON, ufcon);
> +
> + enable_rx_pio(ourport);
> +
> + spin_unlock_irqrestore(&port->lock, flags);
> +
> + /* Enable Rx Interrupt */
> + s3c24xx_set_bit(port, APPLE_UCON_RXTHRESH_ENA, S3C2410_UCON);
> + s3c24xx_set_bit(port, APPLE_UCON_RXTO_ENA, S3C2410_UCON);
> +
> + return ret;
> +}
> +
> /* power power management control */
>
> static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
> @@ -1544,6 +1683,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
> return "S3C2412";
> case PORT_S3C6400:
> return "S3C6400/10";
> + case PORT_APPLE:
> + return "APPLE";
"Apple S5L"?
> default:
> return NULL;
> }
> @@ -1868,9 +2009,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
> /* setup info for port */
> port->dev = &platdev->dev;
>
> + switch (s3c24xx_irq_type(port)) {
> + /* Startup sequence is different for Apple SoC's */
> + case IRQ_APPLE:
> + s3c24xx_serial_ops.startup = apple_serial_startup;
> + break;
> /* Startup sequence is different for s3c64xx and higher SoC's */
> - if (s3c24xx_serial_has_interrupt_mask(port))
> + case IRQ_S3C6400:
> s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
Don't overwrite specific ops. It's difficult to see then which ops are
being used. Instead create a new set of uart_ops matching the needs.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list