[PATCH v4 7/8] arm64: dts: rockchip: add rk3328 dwc3 usb controller node

[Johan Jonker]

From: Cameron Nemo <cnemo at tutanota.com>

RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.

Signed-off-by: William Wu <william.wu at rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Cameron Nemo <cnemo at tutanota.com>
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
Changed V2:
  remove node wrapper
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 4d4cd1830..a3b069a10 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -988,6 +988,25 @@
 		status = "disabled";
 	};
 
+	usbdrd3: usb at ff600000 {
+		compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+		reg = <0x0 0xff600000 0x0 0x100000>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+			 <&cru ACLK_USB3OTG>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		snps,dis-del-phy-power-chg-quirk;
+		snps,dis_enblslpm_quirk;
+		snps,dis-tx-ipgap-linecheck-quirk;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis_u2_susphy_quirk;
+		snps,dis_u3_susphy_quirk;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller at ff811000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
-- 
2.11.0