[PATCH] ARM: configs: at91: enable drivers for sam9x60

Claudiu Beznea claudiu.beznea at microchip.com
Fri Feb 5 04:54:31 EST 2021


Enable drivers for sam9x60/sam9x60-ek:
- shutdown controller
- CAN
- AT24 EEPROM (present on SAM9X60-EK)
- MCP23S08 (present on SAM9X60-EK)
- AES, TDES, SHA

And use "make savedefconfig".

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 arch/arm/configs/at91_dt_defconfig | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 5f3415c743ec..e274f8c492d2 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -17,8 +17,6 @@ CONFIG_SOC_SAM9X60=y
 # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
@@ -38,6 +36,8 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6_SIT_6RD=y
+CONFIG_CAN=y
+CONFIG_CAN_AT91=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
@@ -58,6 +58,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_ATMEL_SSC=y
+CONFIG_EEPROM_AT24=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -91,7 +92,6 @@ CONFIG_RT2800USB_UNKNOWN=y
 CONFIG_RTL8187=m
 CONFIG_RTL8192CU=m
 # CONFIG_RTLWIFI_DEBUG is not set
-CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -111,8 +111,8 @@ CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_ATMEL_QUADSPI=y
+CONFIG_PINCTRL_MCP23S08=m
 CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -208,7 +208,9 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
 CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-- 
2.7.4




More information about the linux-arm-kernel mailing list