[PATCH 5/5] i2c: stm32f7: indicate the address being accessed on errors

Alain Volmat alain.volmat at foss.st.com
Fri Feb 5 03:51:44 EST 2021


To help debugging issues, add the address of the slave being
accessed when getting an error.

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index f77cd6512a86..ef642fe1eb2c 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1602,7 +1602,8 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
 
 	/* Bus error */
 	if (status & STM32F7_I2C_ISR_BERR) {
-		dev_err(dev, "<%s>: Bus error\n", __func__);
+		dev_err(dev, "<%s>: Bus error accessing addr 0x%x\n",
+			__func__, f7_msg->addr);
 		writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
 		stm32f7_i2c_release_bus(&i2c_dev->adap);
 		f7_msg->result = -EIO;
@@ -1610,13 +1611,15 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
 
 	/* Arbitration loss */
 	if (status & STM32F7_I2C_ISR_ARLO) {
-		dev_dbg(dev, "<%s>: Arbitration loss\n", __func__);
+		dev_dbg(dev, "<%s>: Arbitration loss accessing addr 0x%x\n",
+			__func__, f7_msg->addr);
 		writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR);
 		f7_msg->result = -EAGAIN;
 	}
 
 	if (status & STM32F7_I2C_ISR_PECERR) {
-		dev_err(dev, "<%s>: PEC error in reception\n", __func__);
+		dev_err(dev, "<%s>: PEC error in reception accessing addr 0x%x\n",
+			__func__, f7_msg->addr);
 		writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
 		f7_msg->result = -EINVAL;
 	}
-- 
2.17.1




More information about the linux-arm-kernel mailing list