[PATCH] clk: at91: Fix the declaration of the clocks

Nicolas Ferre nicolas.ferre at microchip.com
Thu Feb 4 08:54:04 EST 2021


On 03/02/2021 at 16:43, Tudor Ambarus wrote:
> These are all "early clocks" that require initialization just at
> of_clk_init() time. Use CLK_OF_DECLARE() to declare them.
> 
> This also fixes a problem that was spotted when fw_devlink was
> set to 'on' by default: the boards failed to boot. The reason is
> that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
> the consumers of the clock to be postponed by fw_devlink until
> the second initialization routine of the clock has been completed.
> One of the consumers of the clock is the timer, which is used as a
> clocksource, and needs the clock initialized early. Postponing the
> timers caused the fail at boot.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>

Looks good to me:
Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

Thanks for the fix Tudor! Best regards,
   Nicolas

> ---
> Tested on sama5d2_xplained.
> 
>   drivers/clk/at91/at91rm9200.c  |  3 +--
>   drivers/clk/at91/at91sam9260.c | 16 ++++++++--------
>   drivers/clk/at91/at91sam9g45.c |  3 +--
>   drivers/clk/at91/at91sam9n12.c |  3 +--
>   drivers/clk/at91/at91sam9rl.c  |  3 ++-
>   drivers/clk/at91/at91sam9x5.c  | 20 ++++++++++----------
>   drivers/clk/at91/sama5d2.c     |  3 ++-
>   drivers/clk/at91/sama5d3.c     |  2 +-
>   drivers/clk/at91/sama5d4.c     |  3 ++-
>   9 files changed, 28 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
> index 0fad1009f315..428a6f4b9ebc 100644
> --- a/drivers/clk/at91/at91rm9200.c
> +++ b/drivers/clk/at91/at91rm9200.c
> @@ -215,5 +215,4 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
>    * deferring properly. Once this is fixed, this can be switched to a platform
>    * driver.
>    */
> -CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
> -		      at91rm9200_pmc_setup);
> +CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
> index ceb5495f723a..b29843bea278 100644
> --- a/drivers/clk/at91/at91sam9260.c
> +++ b/drivers/clk/at91/at91sam9260.c
> @@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup(struct device_node *np)
>   {
>   	at91sam926x_pmc_setup(np, &at91sam9260_data);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc",
> -		      at91sam9260_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup);
>   
>   static void __init at91sam9261_pmc_setup(struct device_node *np)
>   {
>   	at91sam926x_pmc_setup(np, &at91sam9261_data);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc",
> -		      at91sam9261_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup);
>   
>   static void __init at91sam9263_pmc_setup(struct device_node *np)
>   {
>   	at91sam926x_pmc_setup(np, &at91sam9263_data);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc",
> -		      at91sam9263_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup);
>   
>   static void __init at91sam9g20_pmc_setup(struct device_node *np)
>   {
>   	at91sam926x_pmc_setup(np, &at91sam9g20_data);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc",
> -		      at91sam9g20_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
> index 0214333dedd3..15da0dfe3ef2 100644
> --- a/drivers/clk/at91/at91sam9g45.c
> +++ b/drivers/clk/at91/at91sam9g45.c
> @@ -228,5 +228,4 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
>    * The TCB is used as the clocksource so its clock is needed early. This means
>    * this can't be a platform driver.
>    */
> -CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
> -		      at91sam9g45_pmc_setup);
> +CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
> index f9db5316a7f1..7fe435f4b46b 100644
> --- a/drivers/clk/at91/at91sam9n12.c
> +++ b/drivers/clk/at91/at91sam9n12.c
> @@ -255,5 +255,4 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
>    * The TCB is used as the clocksource so its clock is needed early. This means
>    * this can't be a platform driver.
>    */
> -CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
> -		      at91sam9n12_pmc_setup);
> +CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
> index 66736e03cfef..ecbabf5162bd 100644
> --- a/drivers/clk/at91/at91sam9rl.c
> +++ b/drivers/clk/at91/at91sam9rl.c
> @@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
>   err_free:
>   	kfree(at91sam9rl_pmc);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
> index 79b9d3667228..5cce48c64ea2 100644
> --- a/drivers/clk/at91/at91sam9x5.c
> +++ b/drivers/clk/at91/at91sam9x5.c
> @@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup(struct device_node *np)
>   {
>   	at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc",
> -		      at91sam9g15_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
>   
>   static void __init at91sam9g25_pmc_setup(struct device_node *np)
>   {
>   	at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc",
> -		      at91sam9g25_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
>   
>   static void __init at91sam9g35_pmc_setup(struct device_node *np)
>   {
>   	at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc",
> -		      at91sam9g35_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
>   
>   static void __init at91sam9x25_pmc_setup(struct device_node *np)
>   {
>   	at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc",
> -		      at91sam9x25_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
>   
>   static void __init at91sam9x35_pmc_setup(struct device_node *np)
>   {
>   	at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
>   }
> -CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc",
> -		      at91sam9x35_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
> diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
> index 9a5cbc7cd55a..3d1f78176c3e 100644
> --- a/drivers/clk/at91/sama5d2.c
> +++ b/drivers/clk/at91/sama5d2.c
> @@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
>   err_free:
>   	kfree(sama5d2_pmc);
>   }
> -CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
> +
> +CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
> diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
> index 87009ee8effc..d376257807d2 100644
> --- a/drivers/clk/at91/sama5d3.c
> +++ b/drivers/clk/at91/sama5d3.c
> @@ -255,4 +255,4 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
>    * The TCB is used as the clocksource so its clock is needed early. This means
>    * this can't be a platform driver.
>    */
> -CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
> +CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
> diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
> index 57fff790188b..5cbaac68da44 100644
> --- a/drivers/clk/at91/sama5d4.c
> +++ b/drivers/clk/at91/sama5d4.c
> @@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
>   err_free:
>   	kfree(sama5d4_pmc);
>   }
> -CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
> +
> +CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
> 


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list