[GIT PULL 4/6] i.MX device tree change for 5.12

[Shawn Guo]

Hi,

Tag imx-fixes-5.11-2 is merged into the branch to resolve some
dependency around imx6-sr-som board support.

Shawn


The following changes since commit 82c082784e03a9a9c043345f9bc04bc8254cf6da:

  firmware: imx: select SOC_BUS to fix firmware build (2021-01-18 15:49:07 +0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.12

for you to fetch changes up to 498f8aee6ec000392d918ecbcbeb1b5ee3132006:

  ARM: dts: imx6: RDU2: adjust audio devices nomenclature (2021-01-30 21:52:31 +0800)

----------------------------------------------------------------
i.MX device tree change for 5.12:

- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
  and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
  readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
  adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
  WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.

----------------------------------------------------------------
Adam Ford (1):
      ARM: dts: imx6q-logicpd: Drop unused clock-names reference

Andreas Kemnade (4):
      ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
      ARM: dts: imx6sl-tolino-shine2hd: add second uart
      ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
      ARM: dts: imx: e60k02: add second uart

Cory Tusar (1):
      ARM: dts: imx6: RDU2: adjust audio devices nomenclature

Fabio Estevam (4):
      ARM: dts: imx6ul-14x14-evk: Fix SPI chipselect polarity
      ARM: dts: imx6ul-14x14-evk: Enable the GPIO expander
      ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
      ARM: dts: imx6ul-14x14-evk: Add camera support

Joakim Zhang (1):
      ARM: dts: imx6: add wakeup support via magic packet

Laurent Pinchart (1):
      ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoder

Lucas Stach (3):
      ARM: dts: imx6: RDU2: reduce i2c drive-strength
      ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
      ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin

Mans Rullgard (1):
      ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

Marek Vasut (1):
      ARM: dts: imx7: Mark timer with arm,cpu-registers-not-fw-configured

Oleksij Rempel (6):
      ARM: dts: add Plymovent M2M board
      ARM: dts: add Plymovent BAS board
      ARM: dts: add Protonic MVT board
      ARM: dts: add Protonic PRTI6G board
      ARM: dts: add Kverneland UT1, UT1Q and UT1P
      ARM: dts: add Kverneland TGO board

Philipp Zabel (1):
      ARM: dts: imx6: rdu2: enable WDOG1

Russell King (1):
      ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter

Shawn Guo (1):
      Merge tag 'imx-fixes-5.11-2' into imx/dt

 arch/arm/boot/dts/Makefile                    |   8 +
 arch/arm/boot/dts/e60k02.dtsi                 |   6 +
 arch/arm/boot/dts/imx28.dtsi                  |  10 +
 arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi |   1 -
 arch/arm/boot/dts/imx6dl-plybas.dts           | 394 ++++++++++++
 arch/arm/boot/dts/imx6dl-plym2m.dts           | 446 ++++++++++++++
 arch/arm/boot/dts/imx6dl-prtmvt.dts           | 852 ++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6dl-victgo.dts           | 852 ++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6dl-vicut1.dts           |  13 +
 arch/arm/boot/dts/imx6q-vicut1.dts            |  17 +
 arch/arm/boot/dts/imx6q.dtsi                  |  20 +-
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi      |   1 +
 arch/arm/boot/dts/imx6qdl-sr-som.dtsi         |   2 +
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi         | 803 ++++++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi       |  42 +-
 arch/arm/boot/dts/imx6qdl.dtsi                |  25 +-
 arch/arm/boot/dts/imx6qp-vicutp.dts           |  13 +
 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts  |  18 +-
 arch/arm/boot/dts/imx6sl-tolino-shine3.dts    |  15 +-
 arch/arm/boot/dts/imx6sll-kobo-clarahd.dts    |  13 +-
 arch/arm/boot/dts/imx6sx-sdb.dtsi             |   2 +
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi       |  54 +-
 arch/arm/boot/dts/imx6ul-prti6g.dts           | 356 +++++++++++
 arch/arm/boot/dts/imx6ul.dtsi                 |   2 +
 arch/arm/boot/dts/imx7s.dtsi                  |   1 +
 25 files changed, 3917 insertions(+), 49 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-plybas.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-plym2m.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-prtmvt.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-victgo.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-vicut1.dts
 create mode 100644 arch/arm/boot/dts/imx6q-vicut1.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1.dtsi
 create mode 100644 arch/arm/boot/dts/imx6qp-vicutp.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-prti6g.dts