[PATCH] clk: at91: Fix the declaration of the clocks

Saravana Kannan saravanak at google.com
Wed Feb 3 13:15:00 EST 2021


On Wed, Feb 3, 2021 at 7:43 AM Tudor Ambarus
<tudor.ambarus at microchip.com> wrote:
>
> These are all "early clocks" that require initialization just at
> of_clk_init() time. Use CLK_OF_DECLARE() to declare them.
>
> This also fixes a problem that was spotted when fw_devlink was
> set to 'on' by default: the boards failed to boot. The reason is
> that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
> the consumers of the clock to be postponed by fw_devlink until
> the second initialization routine of the clock has been completed.
> One of the consumers of the clock is the timer, which is used as a
> clocksource, and needs the clock initialized early. Postponing the
> timers caused the fail at boot.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>

Thanks Tudor!
Acked-by: Saravana Kannan <saravanak at google.com>

-Saravana

> ---
> Tested on sama5d2_xplained.
>
>  drivers/clk/at91/at91rm9200.c  |  3 +--
>  drivers/clk/at91/at91sam9260.c | 16 ++++++++--------
>  drivers/clk/at91/at91sam9g45.c |  3 +--
>  drivers/clk/at91/at91sam9n12.c |  3 +--
>  drivers/clk/at91/at91sam9rl.c  |  3 ++-
>  drivers/clk/at91/at91sam9x5.c  | 20 ++++++++++----------
>  drivers/clk/at91/sama5d2.c     |  3 ++-
>  drivers/clk/at91/sama5d3.c     |  2 +-
>  drivers/clk/at91/sama5d4.c     |  3 ++-
>  9 files changed, 28 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
> index 0fad1009f315..428a6f4b9ebc 100644
> --- a/drivers/clk/at91/at91rm9200.c
> +++ b/drivers/clk/at91/at91rm9200.c
> @@ -215,5 +215,4 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
>   * deferring properly. Once this is fixed, this can be switched to a platform
>   * driver.
>   */
> -CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
> -                     at91rm9200_pmc_setup);
> +CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
> index ceb5495f723a..b29843bea278 100644
> --- a/drivers/clk/at91/at91sam9260.c
> +++ b/drivers/clk/at91/at91sam9260.c
> @@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup(struct device_node *np)
>  {
>         at91sam926x_pmc_setup(np, &at91sam9260_data);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc",
> -                     at91sam9260_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup);
>
>  static void __init at91sam9261_pmc_setup(struct device_node *np)
>  {
>         at91sam926x_pmc_setup(np, &at91sam9261_data);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc",
> -                     at91sam9261_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup);
>
>  static void __init at91sam9263_pmc_setup(struct device_node *np)
>  {
>         at91sam926x_pmc_setup(np, &at91sam9263_data);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc",
> -                     at91sam9263_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup);
>
>  static void __init at91sam9g20_pmc_setup(struct device_node *np)
>  {
>         at91sam926x_pmc_setup(np, &at91sam9g20_data);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc",
> -                     at91sam9g20_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
> index 0214333dedd3..15da0dfe3ef2 100644
> --- a/drivers/clk/at91/at91sam9g45.c
> +++ b/drivers/clk/at91/at91sam9g45.c
> @@ -228,5 +228,4 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
>   * The TCB is used as the clocksource so its clock is needed early. This means
>   * this can't be a platform driver.
>   */
> -CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
> -                     at91sam9g45_pmc_setup);
> +CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
> index f9db5316a7f1..7fe435f4b46b 100644
> --- a/drivers/clk/at91/at91sam9n12.c
> +++ b/drivers/clk/at91/at91sam9n12.c
> @@ -255,5 +255,4 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
>   * The TCB is used as the clocksource so its clock is needed early. This means
>   * this can't be a platform driver.
>   */
> -CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
> -                     at91sam9n12_pmc_setup);
> +CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
> index 66736e03cfef..ecbabf5162bd 100644
> --- a/drivers/clk/at91/at91sam9rl.c
> +++ b/drivers/clk/at91/at91sam9rl.c
> @@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
>  err_free:
>         kfree(at91sam9rl_pmc);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
> diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
> index 79b9d3667228..5cce48c64ea2 100644
> --- a/drivers/clk/at91/at91sam9x5.c
> +++ b/drivers/clk/at91/at91sam9x5.c
> @@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup(struct device_node *np)
>  {
>         at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc",
> -                     at91sam9g15_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
>
>  static void __init at91sam9g25_pmc_setup(struct device_node *np)
>  {
>         at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc",
> -                     at91sam9g25_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
>
>  static void __init at91sam9g35_pmc_setup(struct device_node *np)
>  {
>         at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc",
> -                     at91sam9g35_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
>
>  static void __init at91sam9x25_pmc_setup(struct device_node *np)
>  {
>         at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc",
> -                     at91sam9x25_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
>
>  static void __init at91sam9x35_pmc_setup(struct device_node *np)
>  {
>         at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
>  }
> -CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc",
> -                     at91sam9x35_pmc_setup);
> +
> +CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
> diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
> index 9a5cbc7cd55a..3d1f78176c3e 100644
> --- a/drivers/clk/at91/sama5d2.c
> +++ b/drivers/clk/at91/sama5d2.c
> @@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
>  err_free:
>         kfree(sama5d2_pmc);
>  }
> -CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
> +
> +CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
> diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
> index 87009ee8effc..d376257807d2 100644
> --- a/drivers/clk/at91/sama5d3.c
> +++ b/drivers/clk/at91/sama5d3.c
> @@ -255,4 +255,4 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
>   * The TCB is used as the clocksource so its clock is needed early. This means
>   * this can't be a platform driver.
>   */
> -CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
> +CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
> diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
> index 57fff790188b..5cbaac68da44 100644
> --- a/drivers/clk/at91/sama5d4.c
> +++ b/drivers/clk/at91/sama5d4.c
> @@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
>  err_free:
>         kfree(sama5d4_pmc);
>  }
> -CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
> +
> +CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
> --



More information about the linux-arm-kernel mailing list