[PATCH 03/11] dts: mvebu: Add pin control definitions for SDIO interafce

Russell King - ARM Linux admin linux at armlinux.org.uk
Wed Feb 3 09:28:06 EST 2021


On Wed, Feb 03, 2021 at 03:31:30PM +0200, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>
> 
> Add SDIO mode pin control configration for CP0 on A8K DB.
> 
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> ---
>  arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 6 ++++++
>  arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 6 ++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> index 293403a1a333..179218774ba9 100644
> --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
> @@ -47,6 +47,12 @@
>  	cp0_pinctrl: pinctrl {
>  		compatible = "marvell,armada-7k-pinctrl";
>  
> +		sdhci_pins: sdhi-pins {

sdhi-pins ?

> +			marvell,pins = "mpp56", "mpp57", "mpp58",
> +				       "mpp59", "mpp60", "mpp61", "mpp62";
> +			marvell,function = "sdio";
> +		};
> +
>  		nand_pins: nand-pins {
>  			marvell,pins =
>  			"mpp15", "mpp16", "mpp17", "mpp18",
> diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> index ee67c70bf02e..64100ae204da 100644
> --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
> @@ -70,6 +70,12 @@
>  &cp0_syscon0 {
>  	cp0_pinctrl: pinctrl {
>  		compatible = "marvell,armada-8k-cpm-pinctrl";
> +
> +		sdhci_pins: sdhi-pins {

sdhi-pins ?

> +			marvell,pins = "mpp56", "mpp57", "mpp58",
> +				       "mpp59", "mpp60", "mpp61", "mpp62";
> +			marvell,function = "sdio";
> +		};
>  	};
>  };
>  
> -- 
> 2.17.1
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



More information about the linux-arm-kernel mailing list