[PATCH 05/11] arm64: dts: marvell: armada-3720-db: add comphy references

[kostap at marvell.com]

From: Grzegorz Jaszczyk <jaz at semihalf.com>

Adding phy description to pcie, sata and usb will allow appropriate drivers
to configure marvell comphy-a3700 accordingly.

Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3e5789f37206..15e923f945d4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -132,11 +132,15 @@
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&comphy1 0>;
 };
 
 /* CON3 */
 &sata {
 	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&comphy2 0>;
 };
 
 &sdhci0 {
@@ -217,4 +221,7 @@
 &usb3 {
 	status = "okay";
 	usb-phy = <&usb3_phy>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&comphy0 0>;
+	phy-names = "usb";
 };
-- 
2.17.1