[PATCH v3 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding

[Robert Foss]

On Sat, 30 Jan 2021 at 18:23, Rob Herring <robh at kernel.org> wrote:
>
> On Wed, 27 Jan 2021 15:49:23 +0100, Robert Foss wrote:
> > Add bindings for qcom,sdm660-camss in order to support the camera
> > subsystem on SDM630/660 and SDA variants.
> >
> > Signed-off-by: Robert Foss <robert.foss at linaro.org>
> > ---
> >
> > Changes since v2
> >  - Rob: Add new line at end of file
> >  - Rob: Remove redundant descriptions
> >  - Rob: Add power domain description
> >  - Rob: Make clock-lanes a constant
> >  - Rob: Rework to conform to new port schema
> >  - Add max & minItems to data-lanes
> >  - Remove ports requirement - endpoint & reg
> >  - Added Angelo as binding maintainer
> >  - Removed Todor as binding maintainer
> >
> >
> >  .../bindings/media/qcom,sdm660-camss.yaml     | 398 ++++++++++++++++++
> >  1 file changed, 398 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,mmcc-sdm660.h: No such file or directory
>    21 |         #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
>       |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> compilation terminated.
> make[1]: *** [scripts/Makefile.lib:344: Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dt.yaml] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:1370: dt_binding_check] Error 2

This is expected and mentioned in the cover letter due to a dependency
on an as of yet unmerged mmcc-sdm660 series.

>
> See https://patchwork.ozlabs.org/patch/1432255
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
>