[PATCH v7 2/3] arm64: dts: armada: add pwm offsets for ap/cp gpios

[Bartosz Golaszewski]

On Fri, Jan 29, 2021 at 4:56 PM Gregory CLEMENT
<gregory.clement at bootlin.com> wrote:
>
> Hello Bartosz,
>
> > On Mon, Jan 11, 2021 at 12:47 PM Baruch Siach <baruch at tkos.co.il> wrote:
> >>
> >> The 'marvell,pwm-offset' property of both GPIO blocks (per CP component)
> >> point to the same counter registers offset. The driver will decide how
> >> to use counters A/B.
> >>
> >> This is different from the convention of pwm on earlier Armada series
> >> (370/38x). On those systems the assignment of A/B counters to GPIO
> >> blocks is coded in both DT and the driver. The actual behaviour of the
> >> current driver on Armada 8K/7K is the same as earlier systems.
> >>
> >> Add also clock properties for base pwm frequency reference.
> >>
> >> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> >> ---
> >
> > Andrew, Gregory, Sebastian,
> >
> > Can we get your Acks on this patch? Are you fine with it going through
> > the GPIO tree?
>
> I prefer applying it on our tree to avoid merge conflicts.
>
> Gregory

Ok, I applied the remaining patches from this series.

Bartosz