[PATCH] ARM: dts: zynq: Add address-cells property to interrupt controllers

[Michal Simek]

The commit 3eb619b2f7d8 ("scripts/dtc: Update to upstream version
v1.6.0-11-g9d7888cbf19c") updated dtc version which also contained DTC
commit
"81e0919a3e21 checks: Add interrupt provider test"
where reasons for this checking are mentioned as
"A missing #address-cells property is less critical, but creates
ambiguities when used in interrupt-map properties, so warn about this as
well now."

Add address-cells property to gic and gpio nodes to get rid of this warning.
The similar change has been done for ZynqMP too.

CC: Andre Przywara <andre.przywara at arm.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/boot/dts/zynq-7000.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index df9ad831cf05..c4810d58540b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -133,6 +133,7 @@ can1: can at e0009000 {
 
 		gpio0: gpio at e000a000 {
 			compatible = "xlnx,zynq-gpio-1.0";
+			#address-cells = <0>;
 			#gpio-cells = <2>;
 			clocks = <&clkc 42>;
 			gpio-controller;
@@ -168,6 +169,7 @@ i2c1: i2c at e0005000 {
 		intc: interrupt-controller at f8f01000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
+			#address-cells = <0>;
 			interrupt-controller;
 			reg = <0xF8F01000 0x1000>,
 			      <0xF8F00100 0x100>;
-- 
2.30.0