[PATCH 7/8] arm64: dts: ls1028a: sl28: get MAC addresses from VPD

Michael Walle michael at walle.cc
Tue Dec 28 06:25:48 PST 2021


Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.

There are 8 reserved MAC addresses in total per board. Distribute them
as follows:

+----------+------+------+------+------+------+
|          | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 |   +0 |      |      |   +0 |   +0 |
| enetc #1 |      |      |   +0 |   +1 |   +1 |
| enetc #2 | rand | rand | rand | rand | rand |
| enetc #3 |      |      |      |      |      |
| felix p0 |      |   +0 |      |      |   +4 |
| felix p1 |      |   +1 |      |      |   +5 |
| felix p2 |      |      |      |      |   +6 |
| felix p3 |      |      |      |      |   +7 |
| felix p4 |      |      |      |      |      |
| felix p5 |      |      |      |      |      |
+----------+------+------+------+------+------+

An empty cell means, the port is not available and thus doesn't need an
ethernet address.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts       |  8 ++++++++
 .../freescale/fsl-ls1028a-kontron-sl28-var1.dts |  2 ++
 .../freescale/fsl-ls1028a-kontron-sl28-var2.dts |  4 ++++
 .../freescale/fsl-ls1028a-kontron-sl28-var4.dts |  2 ++
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts  | 17 +++++++++++++++++
 5 files changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 0bcf97772995..6f08d3442309 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -76,6 +76,8 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 4>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,6 +86,8 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 5>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -92,6 +96,8 @@ &mscc_felix_port2 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 6>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -100,6 +106,8 @@ &mscc_felix_port3 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 7>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 7cd29ab970d9..1f34c7553459 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,5 +55,7 @@ &enetc_port0 {
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 330e34f933a3..0ed0d2545922 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -48,6 +48,8 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,6 +58,8 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 9b5e92fb753e..a4421db3784e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,5 +43,7 @@ vddh: vddh-regulator {
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 63e005dd5aae..81b5f735d22e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -108,6 +108,8 @@ &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -170,6 +172,21 @@ partition at 3e0000 {
 				label = "bootloader environment";
 			};
 		};
+
+		otp-1 {
+			compatible = "kontron,sl28-vpd", "user-otp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			serial at 2 {
+				reg = <2 15>;
+			};
+
+			base_mac_address: base-mac-address at 17 {
+				#nvmem-cell-cells = <1>;
+				reg = <17 6>;
+			};
+		};
 	};
 };
 
-- 
2.30.2




More information about the linux-arm-kernel mailing list